re cutting used for sale

Model: Conslit 17 Year of construction 2002 Web width: from 500 to 1750mm 2x web side guides / 2 side edge controls Friction and air shafts: 70, 76, 152 mm

Key data: 90 mm

A first-class renovated extrusion recycling product EREMA Series Type 1109 TVEplus for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Capacity up to 450 kg/h, available at short notice. Electrics: 50 hearts. Note: The brand-new machine of the latest design costs more than 3 times the available machine. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +49 1577 5329827

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8") transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - / Contact us at -

Replacement column for IDRA 2500, D300mm x 7360mm, (1), 181091, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7360mm, trapezoidal thread TR 300 x 10, 4082 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 2500, D300mm x 7115mm, (3), 110850, Strate/Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR300 x 10, 3944 kg New! The column was manufactured by Strate, is in its original packaging and is in the best condition and ready to use. We store them in a dry and thermally insulated room. The column can be visited, tested and picked up from us at any time. We will also be happy to send you a sketch of the construction or deliver the goods to your address. Attention! We offer various columns, adjusting nuts, spar nuts and 2-piece nuts: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7410mm, (4), 240186, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7410mm, trapezoidal thread TR330 x 10, 4972 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7350mm, (5), PR11708354, die-cast servive, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column 5 for IDRA 3300, D330mm x 7350mm, trapezoidal thread TR 330 x 10, 4932 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (6) 220735, die-cast Servive, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (7), 220344, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Strate/Idra, used Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. That's why this column will be sold at a particularly low price. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Replacement tooth small suitable for Hammer RH25 Demolition Pulverizer

Replacement tooth suitable for Hammer RH25 demolition pulverizer

A Krones cap remover from a complete filling line is available. Total line capacity: 30000bottles/h, container volume range: 500ml-1000ml, container types: Euro/GDB long-neck/NRW/GDB bulb-neck/GDB mineral water/Gastro/Gourmet SV/GDB N2 SV. Documentation available. On-site inspection possible. Only the cap remover, not the complete line, is offered.

Key data: 130 mm

Installed capacity 498 kW, single degassing with vacuum pump, screw Optimized for film processing used for PE/PP. DC Drive Throughput with PE approx. 500-700 kg at approx. 150 kw. Throughput for PP approx. 450-550 kg at approx. 160 kw. Composed of: Foil silo with agitator and discharge screw approx. 5 m³ Regrind/granules, dosing screw, masterbatch, dosing screw, tamping unit. Extruder 130L/D 35 Hot Knock Off Granulator (Water Ring Granulator) Centrifuge Classifying sieve Removal with pressure blower Screw and barrel were renewed in 10/2020, (repair costs 45.000EUR) Groove bushing at the inlet renewed in 2015 is currently still at 60%. A new groove bushing is included as a spare part and is included in the retail price. (NP.ca. €5,000) The number of hours spent on the extruder from repair to dismantling of the system is 851 hours. Cooling system Industri ...

Screw Diameter: 35 mm // Output Capacity: 25 kg/h

Screw Diameter: 160 mm // Output Capacity: 1400 kg/h

AMB pre-shredding machine type 753 The plant is already completely dismantled, incl. the hydraulic aggregates and would be ready for pick-up The machine was built in 2004 and was used by us for the pre-shredding of household and bulky waste. It then served as a backup from 2010 to 2022. We have already dismantled the machine and hydraulic unit and stored them on site. Before dismantling, we carried out another test run - without any problems. As the plant had already been dismantled, there was no time pressure. As part of the optimization of the system, the manufacturer AMB installed two additional drives for the shafts - as can be seen in the pictures. Find more here - / Contact us at -

Manufacturer: MAN Model: TGA 28.320 6x2-4BL Year of Manufacture: 2007 Engine Power: 235 kW (320 HP) Fuel Type: Diesel Engine Capacity: 10,518 cm³ Axle Configuration: 6x2-4 Permissible Total Weight: 27,000 kg Permissible Axle Loads: - Axle 1: 8,000 kg - Axle 2: 8,000 kg - Axle 3: 11,000 kg Unladen Weight: 19,000 kg Gross Vehicle Weight Range: 27,000–26,000 kg Wheelbase: 3,500–3,050 mm Tire Sizes: - Front: 315/80 R22.5 - Rear: 385/65 R22.5 Body Type / Equipment: FAUN Powerpress 524 Special Features: - Müllwagen (Refuse Compactor Truck) - Equipped with FAUN Powerpress body system - Red reflectors on foldable components as per StVZO exemption - Noise class: EG Lärmarmer (low-noise vehicle) Find more here - / Contact us at -

Screw Diameter: 100 mm // Output Capacity: 600 kg/h

Screw Diameter: 65 mm // Output Capacity: 170 kg/h

Refroidisseur INDUSTRIAL FRIGO type GR2A 11 Année. : 2021 en excellent état Puissance frigorifique nominale : 10,4 KW / 8900 kcal/h Efficacité : 5 KW Débit pompe : 16 à 100 l/min Pression pompe : de 2,4 à 3,3 bars Puissance compresseur nominale : 2,1 KW Puissance compresseur max. : 3,6 KW Poids : 180 KG Dimensions: 850 x 1050x 1300 mm

2 FADIS hank winder / reeling machines type MR, year 1990 and 1988, 10 spindles / positions each machine

Technical data: Maximum material width: 1350 mm Web guiding system: Optical sensor (control by print mark) Slitting technology: • 8 rotary knives • 8 razor blades Edge trim extraction: fully functional Knife/blade adjustment: Manual Rewinding System - Friction rings: • Ø 76.2 mm / width 25 mm • Ø 152.4 mm / width 35 mm - Rewinding stand: Standard mechanical design, full working width, including adapters for 152.4 mm core diameter

Reach truck, BT, 1.6 to., lifting height 5.40m, - used - : Price (net) ex location: only 4.950.-€! Manufacturer: BT Type: RR B2 Year of Make: 2008 Nominal load capacity: 1,600kg Weight without battery: 2.235kg Battery weight: max. 1.074kg / min. 865kg Battery voltage: 48V, Lifting height: 5,400mm Load center of gravity: 600kg With load centre of gravity 800m: load capacity 1,250kg Incl. charger Condition: good Available: from approx. Beginning of December Location: Düsseldorf

General SKU404U1203 LocationBarneveld MakeEdelstahl Maurer No.208.09.006-13 Year of construction2009 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 ltr Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionscheck DN50 (2x) Outletdia. 33 mm With jacketcheck 11 Ltr. Max. temperature-15°C/+150°C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) Information Floorspace0,75x0,75 m CEcheck Total height1,40 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Stainless Steel ReactorsEdelstahl MaurerReact ...

Hyfra Cooling Water Recirculating Cooler CWK70 Power range: 6.4 kW Year of construction 2009 Refrigerant R410A Mains voltage 400V / 16 A / 3Ph Hose connection 3/4" ID19 VAT is shown EXW, pickup available without warranty

Technical data Film width: 1350 mm Unwinder: Shaftless, servo-driven, Ø1000 mm Rewinder diameter: Ø610 mm Speed: up to 400 m/min Slitting system: Rotary & razor blades Additional features: Banana roller, trim exhauster

Technical Data: Working width: 1200 mm Materials: BOPP, OPP, CPP, PET, OPA Parent roll diameter: 800 mm Final roll diameter: 600 mm Maximum speed: 300 m/min Web guiding system: Yes Knife type: Razor & rotary blades Trim exhauster: Included

Inv. Num. : 8807 Type: PROVITE 2000/120 Producer: Plastmashines Germany Created: 2011 Parameters: Capacity: 400 kg/h Line mounting: Main control panel and monitoring system Mixing/homogenizing tanks Engines Extruder Vacuum pump for degassing Melt filter Closed Water Cooling and Pellet Drying System Unloading silo BOCO PARDUBICE Machines Corner Conveyor Belt Mercedes

1X RESERVE KNIFE FOR POLAR 78 ES Format (cm): 78

Manufacturer: Cofely Model: Quantum II X030 Year of Manufacture: 2015 Type: Industrial refrigeration/chiller system Refrigerant: R134a Refrigerant quantity: 100 kg MAXIMUM OPERATING PRESSURE High pressure (HD): 18.3 bar / 63 °C Low pressure (ND): 18.3 bar / 63 °C OPERATING LIMITS Evaporator - Water side pressure: max. 10 bar - Flow rate: 22.3–53.6 m³/h - Outlet temperature: 3–20 °C - Inlet temperature: 7–25 °C Condenser - Water side pressure: max. 10 bar - Flow rate: 28.6–68.5 m³/h - Outlet temperature: 20–56 °C - Inlet temperature: 15–52 °C MAIN COMPONENTS Turbo Compressors - Model: TT300-H6-1-ST-E-O-CE - Cooling capacity: 300 kW - Power consumption: 2 × 51 kW - Max. current per compressor: 140 A - Voltage: 400 V - Frequency: 50 Hz - Manufacturer: Turbocor Inc. Evaporator - Model: VRMH46.60.180.4 - Evaporating temperature: 9 °C - Volume flow chill ...

Manufacturer: Vitronics Model: 7038 Year of Manufacture: 2004 Power: 55 kVA Voltage: 3 × 400 V Frequency: 50 Hz Machine Weight: 2700 kg Air Pressure: 6 bar N₂ Pressure: 6 bar N₂ Consumption: 50 m³/h Largest Load: 63 A Find more here - / Contact us at -

YORK chiller type YLCC-H 102V In good condition Cooling capacity : 96,1 KW Nominal power :19,1 KW (x2) Power : 400 V - 3,5 Hz R407C Weight. : 1 133 kg

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

Two smaller machines for window and profile processing purposes are available. 1) Profile gluing machine Ruchser RU-FE, year of manufacture: 2003, film width range: 30mm-250mm, film inner/outer diameter: 75mm/270mm, profile thickness range: 30mm-100mm. 2) 2-head profile milling machine Elumatec KF 78/60, year of manufacture: 1993, vertical milling X/Y/Z: 290mm/100mm/120mm, horizontal milling X/Y/Z: 270mm/70mm/120mm, speed: 6000rpm/12000rpm. An on-site inspection is possible.

old sorter for hobbyists to pick up from our customer - still running, but rather "somehow" VB 2 crates of beer

MSB Division Cable Trolley 6-speed Holder for 20 rolls Net weight 600 kg Platform 180 x 130 cm Height 155 cm Roll diameter approx. 63 cm Bj 2011 Shipping via forwarding agent possible, please contact us. More items - new and used - can be found in our shop! International shipping costs on request!

VACUREMA type 120 T-VS for the processing of rPET, technically qualified overhauled, Built in 2004, capacity up to 650 kg/h, with approval according to the standards of the F.D.A. (USA) and ESFA (EU) for direct contact of food of manufactured rPET products. Electrics European standard. Delivery Time: Short Term. Also Folien + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +49 1577 5329827

used screening machine, function-tested, immediately available

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-9

2 oil coolers - through-flow oil coolers: year of construction 1998. Refrigerant: R404A, circulation pump, LAE controller MTR11, suitable for clean oil. Documentation available. 1) Type D 20 V, cooling capacity: 2kW, Walter Procon connector plug, total power consumption 1.7kW. 2) Type D 30 V, cooling capacity: 3.3kW, CEE connector plug, total power consumption 2kW. Dimensions X/Y/Z: approx. 800mm/750mm/1100mm. Inspection possible by appointment.

Wall-mounted refrigerated cabinet, convection cooling Used device built in 2015 with 2 doors with 4 shelves 120 x 75cm Temperature range approx. +2 to +8°C, ready to plug in Digital temperature display Automatic defrost Automatic condensation Consumption: 4.7KW/24h External dimensions approx. 140 x 75 H 207cm LED lighting

2X RESERVE KNIFE FOR POLAR 137 ED-AT Format (cm): 137

Alstom 3 Phase Cast Resin Transformer TTG 1020-4 transformer from 2002, complete (closed module). 1 available 21 KV / 400 V, 50 Hz Manufacturer: Alstom Model: TTG 1020-4 Type: Cast resin transformer Coil Material: Copper Serial Number: 425427/1 Power [kVA]: 1,000 Input [KV]: 21 / 20.5 / 20 / 19.5 / 19 Output [V, A, Hz]: 400 / 1,443 / 50 Around [kV]: 24 Rated current [A]: 28.87 Year of Make: 2002 Weight [kg]: 4.590 Dimensions LxWxH [cm]: 170 x 120 x 190

A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example.

Two metalworking machines are available. 1) Carl Hurth LFV 3. 2) Busch Maschinenfabrik FSV 5, year of manufacture: 1965. On-site inspection is possible. Individual sale possible.

Stahlblech lackiert Innenliegende Rohre: 200 mm lang Ø 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock

- Producer Cefla - Type RIB / 4000 - Year of construction 2003 - Max. part width 1300 mm - Max. part length 3.800 mm - Max. part height ~ 10 - 60 mm - Abstand der Rechen, Höhe 135 mm - Vorschubgeschwindigkeit 2 - 7,5 m/min - Length 4.100 mm - Width 1.700 mm - Height 1.800 mm - Inkl. Control - Location: on stock - Volt / HZ 400 / 50