rd 53 used for sale

pressure reducer, pressure regulator, bladder accumulator, high-pressure bladder accumulator, hydraulic accumulator, pressure accumulator, diaphragm accumulator -Manufacturer: Olaer, pressure accumulator -Type: 140-7315-533-611 -Operating pressure: max. 210 bar -Volume: 1.4 L -Dimensions: Ø 150 x 295 mm -Weight: 4.4 kg

gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Bosch WEG, worm gear motor -Gearbox: Bosch Type FRT 3 842 503 063 -Speed: approx. 36 rpm -Motor: WEG type OD 534 T 0.09 kW -Protection class: IP44 -Shaft: Hexagon 17 x 70 mm -Number: 3x gear motor available -Price: per piece -Dimensions: 270/110/H165 mm -Weight: 4.9 kg/pc.

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 530 mm -Drum: Ø 300 mm -Hole: Ø 77 x 500 mm -Quantity: 1x drum available -Dimensions:Ø 300 x 530 mm -Weight: 54.5 kg

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-20-80-BPA-GF-AJ 532316 -Piston: Ø 20 mm -Stroke: 80 mm -Max. pressure: 10 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 270/85/H35 mm -Weight: 1.5 kg/piece

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-20-80-BPA-GF 532316 -Piston: Ø 20 mm -Stroke: 80 mm -Max. pressure: 10 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 190/85/H35 mm -Weight: 1.5 kg/piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 36 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm -Wall thickness: 39 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm -Weight: 106 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold MPA-FB-VI -Solenoid valves: 556838 / 571334 / 533343 / 533351 / 537962 -Electronic modules: VMPA1-FB-EMG-8 / VMPA2-FB-EMG-4 -End disk: VMPA-FB-EPL-EU -Bus node: CPX-FB33 -Individual components: see photos -Price/Fee: complete -Dimensions: 240/140/H60 mm -Weight: 1.6 kg

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-40-200-B-PPV-A-KF 532319 -Piston: Ø 40 mm -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 365/155/H55 mm -Weight: 5.4 kg/pc.

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-125-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available Price: per piece -Dimensions: 260/85/H55 mm -Weight: 2.0 kg/pc.

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold MPA-FB-VI -Solenoid valves: 537953 / 533343 -Electronic modules: VMPA1-FB-EMG-8 / VMPA2-FB-EMG-4 -End disk: VMPA-FB-EPL-EU -Bus node: CPX-FB33 -Individual components: see photos -Number: 4x valve manifolds available -Price/Fee: per unit -Dimensions: 255/145/H65 mm -Weight: 1.9 kg/pc.

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: for dual tires -Bolt circle: Ø 205 x 20 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 580 x 280 mm -Weight: 56 kg/piece

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: Lemmers 6507 5.00S-12 -Bolt circle: Ø 205 x 22 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 590 x 175 mm -Weight: 50 kg/piece

Substructure for conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand, frame for roller conveyor -Manufacturer: Soco System, base frame height adjustable -Type: Width 475 mm -Height: 535 to 900 mm, continuously adjustable -Quantity: 1 piece base available -Transport dimensions: 475/180/H535 mm -Weight: 8 kg/pc.

Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)

Description MBO T 530-6-4-X-F Pocket folding machine 16 pages Folding machine for the production of books, magazines, brochures and other works. Max. paper size: 53 x 84cm Min. paper size: 14 x 18cm Flat pile feeder with piece counter and Vacuspeed sheet circulation control – double sheet control 1st station T530-4 with 6 cassettes, perforation and creasing mobile 2nd station T530-4 with 4 cassettes, perforation and creasing Mobile knife station 500-X

Eppendorf Mastercycler 5332 Personal PCR Thermal Cycler Temperature range: 4°C - 99°C Temperature distribution: 95°C ± 1.0°C Temperature accuracy: ± 0.2°C Sample capacity: 25 x 0.2 mL tubes or 16 x 0.5 mL tubes

Used line for packing beer bottles in cartons from Meypack. Specifications Performance: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packaging Type: Wrapped Carton Box Carton Dimensions: Length: 120 - 300 mm Width: 210 - 400 mm Height: 100 - 350 mm Packaging Formation: 2x5 & 4x5

Code: 0372 Brand: CASOLIN Model: TOP 530 Automatic thickness planer for wood, joinery, furniture, customer-made furniture, wooden joinery, doors, panels, timber framing, sawmills, plastics, composite materials and various Features: Cast iron work table supported by 4 ground columns with inner rise screw syncronously which guarantees the greates rigidity, the work surface of thicknessing table, worked with a particular processing, guarantees excellent performance of guidance and sliding of the workpiece Automatic locking of thicknessing table Shaft with 4 replaceable cutters ‘TERSA’ Rear pressure roller adjustable to 3 positions Steel feed rollers Technical data: Max working width 530 mm Work table dimensions 530 x 1060 mm Max working height 300 mm Min working height 3 mm Useful thickness 8 mm N° 4 replaceable cutters ‘TERSA’ Shaft rotation speed 5000 rp ...

A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible.

Ref. №: 4252 Frozen meat block guillotine 2 pcs knives for transverse cutting 2 pcs knives for longitudinal cutting Block cross-section: 520 x 300 mm Processing temperature: > -25 °C Max. throughput: 5000 kg/h Hydraulic lifting device Machine dimensions in cm: Width: 110,0 Length: 240,0 Height: 190,0 Installed power: 6,0 kW Voltage: 400 V, 50 Hz

Lippert alignment conveyor inclined roller conveyor 2050-650-530 RA2490 Make: lippert Year of manufacture: Roller width (RB): 530 mm Nominal/outer width (NB): 650 mm Length: 2050 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 2050 Nominal / outside width in mm: 650 Roll width in mm: 530 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simply get in  ...

Key data: 530 mm, 300 mm, 4 kW

Table length 800mm Feed speed 5/8/12.5/19.5 m/min 4-strip planer blade shaft Ø110mm 3 upper feed rollers 1 table feed roller Speed planing shaft 5000 rpm electr. Table height adjustment with electr. Advertising Extraction hood Ø150mm Dimensions LxWxH=1070x880x1150mm Wt. approx. 700kg The machine is in use. Changes to technical data, typesetting and printing errors as well as errors are reserved at any time!

Lippert belt conveyor GF 5300-570-450 RA2495 Technical data: Conveyor length (NL): 5300 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5300 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Bitzer OSKA 5341-k open Schroef compressor R717 NH3. Open Schroef compressor for ammonia R717. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Wire EDM machine Sodick AQ 537L with few operating hours

Croissant machine POLIN, type: Gruppo Croissant 530 Avant "C" -In very good condition- - Calibration unit with belt - Longitudinal section - Cutting knife / guillotine - Winding unit - Belt of the croissant machine would have to be changed - Condition: Very good, little used - Videos can be sent Visits and test runs are possible by arrangement.

Aircooled chiller YORK YGT550HE 535.3 KW Cooling capacity: 535.3 kW / 152.2 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Leak detector Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH9663-160Y-40D (screw, inverter) + 1 pcs. Bitzer CSH9663-160Y-40D (screw) Type of refrigerant: R1234ze Number of fans: 10 pcs. (EC-fans) Dimensions: 6.2x2.16x2.66 m. Weight: 6297kg. Working hours: 0/0 h. Condition: New

This 4-axis IMA BIMA/300/125/530 CNC processing center was manufactured in 2012. It features an extensive working range with an X-direction of 5300 mm and Y-direction of 1400 mm. The machine includes a powerful main spindle with a speed range of 0-24,000 rpm and a tool holder of HSK F63. If you are looking to get high-quality CNC machining capabilities, consider the IMA BIMA/300/125/530 machine we have for sale. Contact us for further details.

Cleaning machine used Visually and mechanically good condition Fully functional Without warranty _ Purchased as seen Video in operation can be sent on request. Payment of the machine at pick-up or in advance by bank transfer Invoice Amount plus VAT

Max. saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangle 380x70m Cutting capacity 45° left Round 180mm, square 150mm; Rectangle 290x70mm Cutting capacity 45° right Round 180mm, square 150mm; Rectangle 290x70mm Digital degree display for the saw table Turning range of the saw table 180° Spraying device 2-hand operation

General SKU345S646 MakeEnco Energie Componenten (AT) LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume5350 Ltr. Motor2 KW Specified Features - Bioreactor Reactorcheck Capacity5350 Ltr. Vessel sizesdia. 1800x2410 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN200, DN100, DN80, DN50 OutletDN80 With jacket(120 Ltr.) Max. temperature200°C With paddle stirrer(Stelzer) Motor1,25/2 kW 380 Volt (Ex) Speed mixing shaft32/63 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4539 (904L) General No.3385/101.1 Year of construction1990 Floorspace2,1x2,1 m Total height2,5 m ATEX designedcheckPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsD ...

General SKU135M473 MakeWolff No.10255/10256/10257 Year of construction1981 Mounted on framecheck Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume535 Ltr. Motor2.2 KW Specified Features - Stirring vessel Closed stirring vessel:Horizontal: Capacity535l Vessel sizesDia. 600 x 2000 mm ManholeDia. 400 mm OutletDia. 65 mm With jacket(92 Ltr.) With paddle stirrercheck Motor1,5 kW / 2,2 kW (400 V) Speed mixing shaft7,6-38,0/15,2-76 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld Floorspace2,5 x 1,2 m Total height1,2 m Weight650 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPap ...

Key data: 700 mm

A Behringer HBP 530 is hereby sold, as this is no longer needed if you are interested, please feel free to write to us

digital: ja multifix: ja : ja documentation: ja bed bridge: ja good condition: ja centre distance: 1800 mm : 530mm serial number: 0556 hollow: 60 mm weight: 3,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of  ...

working width: 530 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2900 mm; adjustment table: Hebel; read out out table height: Scala; surface fence tiltable: ja; motor power: 4 kW; machine length: 2900 mm; machine width: 1000mm; weight: 800 kg;

Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp, foot clamp holder, mounting bracket -Manufacturer: item, Mounting bracket ZnAl4Cu1 3 pieces -Type: 539.62 -Submission/Price: complete -Dimensions: 80/40/H80 mm -Weight: 0.3 kg/pc.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Interface module: 48-pin -Circuit board: Type P7127J 536/1 -Number: 3 modules available -Price: per piece -Dimensions: 150/70/H65 mm -Weight: 0.2 kg/pc.

Laminating machine Matrix MX 530 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Laminating machine Matrix MX 530 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Laminating machine Matrix MX 530 Price: 3000 EUR Download PDF Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in l ...

Key data: 1050 mm, 530 mm, 510 mm

Mazak VCN 530C CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, left - Cooling by the spindle 15 bar - Kitagawa NC Rotary Table MR 200 - Total spindle runtime 3,454 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Haas ST-25Y Ø 381 x 533 mm CNC Swing over bed: 381 mm Distance centre tot centre: 533 mm Max longitudinal travel Z-axis: 533 mm Max cross travel X-axis: 214 mm Spindle cone: A2-6 Dia of spindle bore: 76 mm Power on the spindle: 22,4 kW Number of speeds: 4000 rpm Command: Haas Length: 3180 mm Width: 1980 mm Height: 1960 mm Weight: 6 ton Toolchanger: yes Number of tools: 12 driven positions

Key data: 1050 mm, 530 mm, 510 mm

CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, right - Cooling by the spindle 15 bar - Total spindle runtime 8,074 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. th ...