ras bending used for sale

Factory Number 056-005/1 Machine Type Hydraulic Single-Column Press Press Force 1,600 kN / approx. 160 t Table Size 900 × 630 mm Ram Surface 750 × 450 mm Max. Installation Height / Opening 800 mm Min. Opening 300 mm Ram Stroke 500 mm Hydraulic Pressure 160 bar Connected Load 11 kW Connection Voltage 400 V / 50 Hz Control Voltage AC 230 V Rated Current 24 A Supply Line Fuse 50 A CE Marking

Dowel and slotted hole drilling machine GANNER JUNIOR 320 LBM very good condition, as good as new, the machine comes from a small carpenter's shop and was used there very little This allows slotted holes to be milled and dowel holes to be drilled in 2 planes without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1990 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical the machine requires a compressed air connection of 6bar (the air  ...

Key data: 6400 mm, 1 mm

used RAS double folding machine, the RAS XXL-Center 75.06 is a Automatic swivel bending centre for the efficient production of long roof, wall and façade profiles, which independently pull in sheet metal, position it and move it upwards bends at the bottom. Thanks to automated processes, simple programming via Bendex and optional cutting module, it enables an economical One-man operation with reduced personnel costs and high productivity. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (max.) 750 mm Back gauge (min.) 6.5 mm Colour grey/yellow Total power requirement 3 kW Dimensions 9,400 x 3,000 mm Weight 12500 kg Roller scissors none Bending angle (max) 300 deg ...

sheet width: 3190 mm plate thickness: 6,3 mm back stop - adjustable: 5-1000 mm work height max.: 930 mm : 30-50 cutting angle: 1,2 ° total power requirement: 18,5 kW weight: 6800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Item # 9419 - CHOCOLATE FOIL WRAPPER - hollow figures Manufactured by RASCH Currently set up for a small flat bottomed bunny shape (like gold Lindt style) Model Fi-VI (Fi6) Year 1995 Overhauled in Year 2019 With Control Panel Also with HERMA Labeller Up to 62 items per minute Suitable for products with height 50 to 120mms Product width up to 50mms Product diameter 25 to 50mms Wrapping material width 100 to 180mms Wrapping cut off length 110 to 220mms Aluminium Foil wrapping material

pressure:150 t throat:450 mm stroke:115 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:2250 x 1090 mm table height over floor:900 mm passage to the back:1900 mm ram surface:1900 x 900 mm ram adjustment:100 mm power requirement:16,0 kW weight:19,5 t Dimensions (WxDxH):3,0 x 2,3 x 3,9 m

Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally

BAP prism light weight L = 1260 B = 325 height 93 mm. = energy-saving reflector only 1x36W VVG. Orginalverpackt, unused, remaining stock. Sale. For OWA ceilings, false ceilings. Info under 0170 / 2204056 E-mail at fa.raupp@t-online

Height 1350 Width 1700 mm Length 700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Chamber dimentions 500 mm

Rasp cutters, plastic cutters, mold making cutters, Styrodur cutters, Styrofoam cutters -Rasp cutters 40 pieces -Hole: Ø 30 mm -Type/Sizes: see photos -Transport dimensions: 800/600/H420 mm -Total weight: 89.4 kg

Aksar AFM-BFM Rasgulla Gulabjamun making machine Rasgulla Gulabjamun making machine, ball forming machine is used for cutting and rounding various types of sweets and food products like rasgulla, gulabjamun, rasmalia, chumchum, peda, chocolate, coconut laddu, sweet balls, kachori, dates balls, riceball and various types of bakery, confectionery and indian snacks, 15L hopper, 10,000 pieces per hour, 1g to 100g, variable speed, mobile, 1Ph

Chemical pump, water pump, centrifugal pump JENAER GLASWERK Type: KRS 40 / 120 Ras Flow rate: 16 m3/h Head: 12 m Pump housing material: glass connections ( inner diameter ): Ø 40 mm motor: VEM KMR 100S2 ( KMR100S2 ) 2,2,2 8 kW 2890 rpm 220 / 380 V 3AC 50 Hz explosion-proof ! used, tested ! Dimensions: 570 x 255 x 310 mm

Beading machine RAS REINHARDT RAS 12.31 sheet thickness: max. 1.75 mm projection: 280 mm roller center distance: to 65 mm , to 85 mm motor: 0.37 kW 380 V with foot switch ! Clockwise / counterclockwise switchable used, checked! Dimensions: 830 x 430 x 1350 mm

Pillow Block Bearing, with Insert Bearing INA RASEL40-N 2 pieces ! Housing: GG. ASE08 insert bearing: GLE40-KRR-B shaft diameter: Ø 40 mm Dimensions (single bearing): 179 x 43 x 99 mm New ! Dimensions (packing): 180 x 90 x 100 mm

Pillow Block Bearing, with Insert Bearing INA RASE50-N 2 pieces ! Housing: GG. ASE10 insert bearing: GE 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 63 x 115 mm New ! Dimensions (packing): 200 x 130 x 120 mm

Pillow Block Bearing, with Insert Bearing INA RASEY50-N 2 pieces ! Housing: GG. ASE10 insert bearing: GEY 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 52 x 115 mm New ! Dimensions (packing): 200 x 110 x 120 mm

Pillow Block Bearing, with Insert Bearing INA RASEL50-N 2 pieces ! Housing: GG. ASE10 insert bearing: GLE 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 50 x 115 mm New ! Dimensions (packing): 200 x 100 x 120 mm

Auction-ID: A1-50597-107

Pillow Block Bearing, with Insert Bearing INA RA SE70 housing: GG. ASE14 insert bearing: GE 70-KRR-B shaft diameter: Ø 70 mm New ! Dimensions: 260 x 65 x 156 mm

Pillow Block Bearing, with Insert Bearing INA RASE50-N 10 pieces ! Housing: GG. ASE10 insert bearing: GE 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 63 x 115 mm New ! Dimensions (package): 520 x 260 x 120 mm

Auction-ID: A3-46110-2840

Used ACMI RASAR D200 depalletizerTechnical Specifications & Performance DataThis ACMI RASAR D200 depalletizer is a reliable solution for high-efficiency bottle handling within a used bottling line or second hand industrial packaging environment. Engineered for beverage production and general industrial packaging, it processes layers of bottles from standard pallets with precise and gentle handling. Designed for glass and PET bottle applications, it offers stable performance for multiple beverage categories, ensuring dependable operation in demanding production schedules.Manufacturer: ACMIModel: RASAR D200Year: 2004Machine type: DepalletizerMaximum speed: 16,200 bph (application dependent)Container materials: Glass, PETPallets handled: EPAL 800x1200 mmWorking height: 1200 mmOperating pressure: 6 barSupply voltage: 400 V (3PH + N)Frequency: 50 HzRated current: 51 AAuxiliary voltage: 24 V D ...

To push the arm set open at RASM Kindly Contact Sai Bavani [F10, Purchaser] 011-79573840

DOUBLE FRONT FRAME COMPLETE COMPUTER MUDATA EXTERNAL CREEL AND BEAMS

Robust mechanical swing shears for precise straight cuts of metal sheets. The machine has a working length of 2,040 mm and is designed for processing steel sheets up to approx. 2.5 mm. Due to the solid machine construction with a dead weight of approx. 2,050 kg, the shears are suitable for use in workshops, metal construction and industrial production. Technical data: - Working length: approx. 2,040 mm - Cutting capacity steel: approx. 2.5 mm - Manufacturer's specs max. material thickness: up to 3 mm - Motor power: 5.5 kW - Operating voltage: 380 V - Frequency: 50 Hz - Current consumption: 12 A - Connection: 3-phase - Machine weight: approx. 2,050 kg - Mechanical swing shear design - Operation via footswitch - Several front material support arms - Backgauge available - Cutting area with lighting - Stable machine table for guiding the metal sheets The machine has a  ...

Foot control, Auction-ID: A1-50476-13

Auction-ID: A3-46110-2839

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

B50 - Mech. Bending machine/reinforcing steel bending machine New / Unused Year of construction 2026 -Technical data see data sheet Dimensions LxWxH 1.4x1.3x1.5 meters / Weight 500Kg

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg