129,383 used machines on RESALE, but how to find them? Machine Search
Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons
Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton
Key data: 2500 mm, 2 mm
with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3
Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.
Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75
CONTROLS conventional PRESS FORCES total force (nominal): 75 to PRESS TABLE table surface (left-right): 1250 mm table surface (front-back): 1110 mm SLIDE table surface (left-right): 960 mm table surface (front-back): 750 mm SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 10 mm stroke max.: 50 mm stroke rate (min.): 120 /min stroke rate (max.): 600 /min STRIP-FEEDER feeder type: roll feeder sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS total power consumption: 15.5 kW DIMENSIONS / WEIGHTS total weight approx.: 13500 kg ATTACHMENTS (PRESSES) strip feeder: yes feeder type: roll feeder
De uitrusting bestaat uit: - 3 decoilerstations met een capaciteit van 5 ton - Ras richteenheid - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen - Ras vouwunit voor vierkante luchtkanalen
Type: 82.25 Max sheetthickness: 2 mm Cuttinglength: 2540 mm Electric motor (power): 3 kW Weight: 1600 kg
pressure: 60 t stroke: 60-80 mm no. of strokes: 60-300 Hub/min weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete punching system with a grid punch is available. 1) Double reversible decoiler, load capacity: 1000kg. 2) Alba GGVHY 200 straightening machine, year of manufacture: 1992, feed rate: 6.5m/min, max. material width: 200mm, max. material thickness: 4mm, transport rollers: 2. 3) Alba MA RIA 7 feed, year of manufacture: 1978, max. material width: 300mm, max. material thickness: 3mm, feed rate: 40m/min, control: Siemens S7. Material thickness: 3mm, feed speed: 40m/min, control: Siemens S7 with OP7. 4) Punching machine Raster HR 80/700 NL, year of manufacture: 1992, pressing force: 80t, stroke rate: 250/min, table dimensions X/Y: 730mm/750mm, ram dimensions X/Y: 730mm/630mm, ram stroke: 40mm, ram adjustment: 80mm. 5) Profiling machine CIS. Documentation available. On-site inspection is possible.
A complete punching system with a grid punch is available. 1) Reel Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000kg. 2) Straightening machine, max. material width: 300mm, max. material thickness: 2mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5m/min, max. material width: 300mm, max. material thickness: 4mm, transport rollers: 2. 4) Punching grid HR 50/600 NL, stroke rate: 300/min, stroke: 30mm-80mm. On-site inspection is possible.
Key data: 75 t, 80 mm, 120 1/min
Pressure 75 t Stroke rate 120-600 / min Sheet width 10-300 mm Table size 1050 x 820 mm Pusher clamping surface 960x820 mm Distance table - UK plunger 380 mm Adjustable stroke - max. 80 mm Feed length 0-150 mm Total power requirement 20 kW Machine weight approx. 13 t Feed unit with max. belt speed 70 m/min Eccentric shaft with 4-fold bearings 2 connecting rods Central lubrication incl. magnetic belt conveyor - in use until 2020 -Operating instructions -Manual - Circuit diagram etc..
Profile belt sanding machine, PS0 Rasprofil from Zimmermann with many accessories Sanding machine with swivel table and additional equipment for rasps. Ideal for use in model making and mould making. For precise grinding of contours. All settings with clamping lever and fine adjustment. Drive motor 400Volt, 1.1kW Table can be swivelled up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400mm Fold-down upper extraction arm for sanding large parts. By snapping the free-standing profile rail into the upper part of the machine, a high angular accuracy can be achieved. Including three profile turning rails 15, 30 and 40mm (straight and radius) In addition, some sanding belts, see photos Three unused rasps. Suction connection 80mm Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motor ...
Key data: 3190 mm, 6 mm
Note: Machine is currently still being revised, the illustrations were made before the Revision. Sheet width: 3190 mm Sheet thickness steel: 6.3 mm Colour: grey Total power requirement: 18.5 kW Machine weight: 6800 kg Dimensions: 3830 x 3820 mm with cutting gap adjustment Stroke rates per minute: 30 - 50 strokes/min Angle stop: 1500 mm Throat: 5 - 1000 (1500) mm
Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg
sheet width: 2540 mm plate thickness: 2.00 mm thickness at Niro-steel: 1.25 mm no. of strokes: max. 63 Hub/min cutting angle: 1.13 Grad table height: 750 mm table width: 320 mm distance between columns: 2620 mm back stop - adjustable: 5.0 - 550 mm Control: konv. engine output: 3.0 kW weight of the machine ca.: 1600 kg range L-W-H: 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display adjustable from the front stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts The data for this ad was created wit ...
sheet width: 1040 mm plate thickness: 2.50 mm thickness at Niro-steel: 1.25 mm no. of strokes: max. 90 Hub/min cutting angle: 2.70 Grad distance between columns: 1060 mm work height max.: 940 mm back stop - adjustable: max. 550 mm column arm: 120 mm voltage: 400 V engine output: 4.0 kW weight of the machine ca.: 820 kg. range L-W-H: 1650 x 1200 x 1250 mm Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display adjustable from behind continuous adjustment over the entire travel range travel range max. 550 mm - 1x hold-down bar - 1x side stop - 1x front support arm - original operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter of brush: 250 mm width of brush: 80 mm turning speed range: 1500 / 3000 U/min voltage: 380 Volt total power requirement: 2,0 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9238987 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 2.00 mm thickness at Niro-steel: 1.25 mm no. of strokes: max. 36 Hub/min cutting angle: 0.9 Grad table height: 800 mm table width: 430 mm distance between columns: 3200 mm back stop - adjustable: 5.0 - 750 mm Control: konv. engine output: 3.0 kW weight of the machine ca.: 1950 kg range L-W-H: 3730 x 2070 x 1400 mm Original price approx. 45.000 euros () Special price on request Features: - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge Travel range 5.0 – 750 mm stop depth Analog position display Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam Hold-down opens before the knife beam moves up No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet ...
Key data: 100 t
Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee
Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -
Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motorized backgauge with hinged cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 controller Segmented upper beam tool with automatic tool clamping (height 100 mm) Operating instructions Weight: 5800 kg
Manufacturer: Rasco Model: SO1800T Year of Manufacture: 2007 Power Supply: - 400V 3 / N / PE - 208V 3 / PE - 230V 1 / N / PE - 50–60 Hz - 6 kW Air Supply: 6 to 10 bar Exterior Dimensions: - Width: 37.008 in (94.0 cm) - Depth: 43.307 in (110.0 cm) - Height: 88.583 in (225.0 cm) Weight: 871 lb (395 kg) Find more here - / Contact us at -
Large working width: 3060 mm for sheet metal (at 40 kg strength) up to: 4 mm Kl. Bending radius: sheet thickness x 1.25 Kl. Inboard height: sheet thickness x 6 Opening width of the upper beam: 220 mm Adjustability of the lower/bending beam: 90 mm Max. bending angle: 180° Lifting speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Space requirement: 4150 x 1800 x 2500 mm
working width: 50 mm workpiece height: - mm wheel diameter: 250 mm grinding wheel width: max. 40 mm turning speed range: 1500 + 3000 U/min total power requirement: 1,0 / 1,4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 0,65 x 0,45 x 1,15 m Electric 380 Volt: Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A "Raster Zeulenroda" (today Zeulenroda Presstechnik) step press type "Paust 16.2" with 160 kN press force is sold. The machine was completely overhauled in 2006 and has been in use in 1-3 shifts since then. A visit is possible from Monday to Friday.
Minipack RAS FM76 shrinkwrapper With automatic transport after the sealing has been completed on a movable frame size: 500x380x200 mm
Technische specificaties Ingangsvermogen 1,5 / 2,4 kW Snelheid 1000 + 1500 toeren per minuut Werkstukgegevens Materialen staal, roestvrij staal, aluminium, non-ferrometalen Dwarsdoorsneden 20 x 20 tot 120 x 120 mm20 x 20 tot 150 x 150 mm10 x 10 tot 180 x 450 mm Ontbraamtijd secties 1 – 5, zware werkstukken 4 tot 12 sec.
This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 Ã 2700 Ã 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.
General SKU406S1038 LocationBarneveld MakeBallerstaedt & Co. Rastatt (D) TypePOLYMAT-VARIOSEAL PN Main Features Inlet diameter90 mm Number of1 heads Specified Features - Capper MaterialStainless steel Single headcheck Suitable forplastic and glass containers Number of closing heads:1 Without motorcheck Manual operatedcheck CapacityDepending on the skill of the operator up to 700 sealing/h. Suitable for bottle/jar dia.90 mm Suitable for bottle/jar height375 mm Information No.71.9615.011.1000 Year of construction1996 With switchcheck Floorspace0,6x0,4M Total height1 M Weight50 KgCappersBallerstaedt RastattPackaging machines > CappersBrand > Ballerstaedt Rastatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...
sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1300 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
electromechanical sheet metal shears brand RAS type 83.20. Year of manufacture 1994. Cutting length 2040mm up to 3mm thickness Digital measurement of the rear stop 790mm. Sheet metal holder along the entire length - repair (adjustment) required. Rear pneumatic supports. Power 5.5 KW weight 2050kg.
sheet width: 3200 mm plate thickness: 3.0 mm ST thickness at Niro-steel: 2.0 mm Opening width / upper beam: 300 mm speed: OW 40.0 mm/sec Bending beam adjustment: 80.0 mm speed: BW 90.0 Grad/sec work height max.: 900 mm control: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mm accuracy +/-: 0.1 mm air pressure: 5.0 bar Number of working hours: ca. 1.000 h total power requirement: 2x 4.0 kW voltage: 400 V weight: 4400 kg range L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine RAS 73.30 hi ...
Key data: 1020 mm, 2 mm
with bending rail 10 and 19 mm, additional segment insert for the upper beam (segment height 60 mm) and Material thickness adjustment, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: green Machine weight: 350 kg Opening width: 150 mm Bending angle (max.): 130 degrees Machine number 16/9
sheet width: 2500 mm plate thickness: 3 mm distance between columns: 2540 mm back stop - adjustable: 550 mm total power requirement: 5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 3,2 x 2,5x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mm plate thickness: 2,5 mm distance between columns: 2540 mm daylight opening: 200 mm total power requirement: 2,0 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 3,35 x 0,8 x 1,4 m Swivel bending machine with - mechanical backgauge - bending angle preselection - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3200 mm, 2 mm
used RAS 62.30 folding machine TurboBendPlus, a proven and reliable machine for professional sheet metal processing on roofs, walls and façade. The machine is ideal for tinsmiths, roofers, plumbers, locksmiths and metalworkers who rely on precise work results, robust technology and economic work. The RAS 62.30 impresses with its robust design and the high quality of the manufacturer RAS. It is ideally suited for everyday use Use in the trade and in the workshop. Used machines of this class offer an economically attractive opportunity to combine high-performance technology at a good price. The machine is equipped with a motorized depth stop, that facilitates precise and comfortable work. In addition, it has a segmented upper beam with a height of 110 mm, which makes the machine particularly can be used flexibly for different bending and bending work. This used RAS 62.30 is th ...
Working lenght 2540 mm Material thickness max (400 N/mm²) 2.5 mm Upper beam upstroke max 280 mm Gauging system (rectangular) 6-1550 mm Gauging system (T-shape) 6-3050 mm
guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 15 BL 245 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg
Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket, for notching machine, sheet metal notching machine, notching shear, corner notching machine, corner shear, corner shear -Manufacturer: Raskin, punching unit type 125 NIA 111.163.0 -Punching capacity: 3mm -Dimensions: see photos -Dimensions: 270/200/H150 mm -Weight: 30.5kg
Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg
Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg
Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg
: bending speed: U/min : : 2 mm dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm weight of the machine ca.: 250 kg Equipment/Accessories: - Foot switch - Mobile stand Includes a wide range of bending tools See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Large working width: 4000 mm for sheet metal with a strength of 40 kg up to: 3 mm Table width: 470 mm Back gauge adjustment: 1000 mm Fixed cutting angle: 1°30' Column projection: 200 mm Hydraulic drive: 380 V, 7.5 kW Space requirement: 4650 x 1830 x 1420 mm high Weight: 5.7 t
Used ACMI RASAR P130 palletizer - 10800 BPHTechnical Specifications & Performance DataThe ACMI RASAR P130 Palletizer is a robust solution for end-of-line industrial packaging in beverage and food sectors. Built for reliability and flexibility, it efficiently palletizes packs and cartons across multiple container materials and product categories. This second hand palletizer integrates seamlessly into a used bottling line and supports high-throughput beverage production environments.Manufacturer: ACMIModel: RASAR P130Year: 1994Maximum speed: 10,800 bottles/hour (3x2 configuration)Products to palletize: Packs and casesContainer materials: Aluminum cans, Glass bottles, PET bottlesSupported pallets: EPAL 800x1200 mmAutomatic layer-pad inserter: YesWorking height (infeed/outfeed plane): 750 mmCompressed air pressure: 6 barControl system: Siemens PLCType: Conventional automatic, low-level handl ...
maximum number of results exceeded
please refine your search
