rapida 72 k used for sale

Thank you for your interest in our machines, which we can offer you as follows: Brand: Untroma Model : Klimat 090/12 Condensation Dryer - Drying Oven Year of construction : 2023 electr. Values : 12 KW 400 V 50 Hz 3Ph Dry product: up to 120kg/day Machine dimensions : approx. 1300 x 940 x 2050 (lxwxh in mm) Details : Filling capacity up to 150 kg depending on cutting thickness and tray height Drying at up to 45°C in about 24h Suitable for fruits, vegetables, pasta, meat, animal feed, technical products We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Thank you for your interest in our machines, which we can offer you as follows: Brand: Untroma Model : Klimat 090/12 Condensation Dryer - Drying Oven Year of construction : 2023 electr. Values : 12 KW 400 V 50 Hz 3Ph Dry product: up to 120kg/day Machine dimensions : approx. 1300 x 940 x 2050 (lxwxh in mm) Details : Filling capacity up to 150 kg depending on cutting thickness and tray height Drying at up to 45°C in about 24h Suitable for fruits, vegetables, pasta, meat, animal feed, technical products We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

capacity 90 degrees: round: 110 mm capacity 90 degrees: flat: 255x160 mm capacity 90 degrees: square: 210x210 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 165x110 mm cutting range 45 degree right side: square: 150x150 mm cutting speed: 11/13/17/22/26/34 m/min stroke speeds: 50/64/82/100/128/164 Hübe/min dimensions of saw-blade: 400x36x2 mm power requirement: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process Vessels Manufacturer : Küchenbauer Capacity: 194 litres Technical specifications : Cylindrical stainless steel container, hanging, claws, without frame Double-jacket, steam- or water-pickled, pressure-resistant up to 3 bar, operating temperature double-jacket: 140 °C Agitator Interior Operating temperature 100 C° Lid

Key data: 1425 KW, 1600 kVA, 6300 V

Kawasaki Gas Turbine GPB 15D Gas turbine from 2006 with 32,000 operating hours, 1 available 1,280 KWel x 1,500 rpm, 6,300 V/50 Hz. AC Generator: AEM SEH 500 L4, 1,600 KVA Manufacturer: Kawasaki Model No.: M1A-13D Type: Gas Turbine Serial Number: KHI-1012 Power [KW]: 1,425 Year of Make: 2006 Operating hours: approx. 32,000 Weight unit [kg]: 12,000 Dimensions unit LxWxH [cm]: 870 x 290 x 310 AC Generator Manufacturer: AEM Model: SEH 500 L4 Type: AC Synchronous Generator Serial number: 3085 00218 Power [KVA]: 1,600 Voltage [V]: 6,300 Frequency [Hz]: 50 Current [A]: 175 Speed [1/min]: 1,500 Year of Make: 2006 Weight [kg]: 6.460

Dry Extraction Wall Spänex TAW compact 215 Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray chamber control with touchscreen 2 x 2.0 kW drive power 6000 m³/h volume flow Year of construction: 2011 From joinery liquidation / retirement in GOOD - CONDITION from the carpentry workshop

Raystat / Krebser Swivel Bracket US-Uni with - Generator CPI CMP 200 DR - Tube RAD 14 Fa. Varian 0.6/1.2 - Mobile patient couch • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Hereby 12 pieces of very beautiful, upright Kaspar Schulz storage tanks with a capacity of 6,000 litres each are offered. The tanks have no damage whatsoever and are in mint condition according to their age. Specifications: - Make: Kaspar Schulz (high-quality tanks) - Equipment: with spray head and complete RLV fittings. - Year: 1989 - Capacity: 5.982 Ltr. -Ab. Operating overpressure: 0.9 bar -Ab. Operating temperature: 20 degrees. - Dimensions: Room height in which you stand: 3.80m, diameter: 1.65m If you are interested, please inquire.

; Power [PS]: 24; Gross weight [kg]: 650; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator., Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70

; Power [PS]: 24; Gross weight [kg]: 630; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: , - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator. , Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70

KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely re ...

Specifications: - Max. load capacity 5000 kg - Max. clamping diameter 1800 mm - Face plate dimensions 1200 x 1200 mm - Rotary movement electr. Infinitely variable - Right + Left – Run - E. - Remote Controller - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

Quantity: 2 pieces Manufacturer: Knoll Type: 200 S-1 Year of Make: 2013 Total length: 4 m Conveyor belt: 2 m

2021 Kraft VPS-100/2500 Cardboard cutting machine VPS100 from Kraft The machine was built in 2021 and was used very little. VPS100/2500 Basic machine plus - 10 x tool for longitudinal machining - 1 x tool for cross processing - 2 x rubberized rollers as counter-cut or transport medium - 1 x upper pressure controlled in segments above the feed roller - 1 x control cabinet decoupled and integrated in the basic machine Additional: - Freestanding control panel - Automatic outfeed device - Automatic carton changer with 6 chutes (4 with side-by-side function) - Mguard router - Wireless 1D code scanner incl. interface - 3 free Kraft Boxdesigner licenses + 1 license on the machine Description With the VPS100 automatic box cutting machine you can finally produce the right packaging, at the right time, in the right quantity. Reduce your cardboard consumption to what is necessary ...

Control SAFAN ... TS 1 Thrust... 50t Bending length ... 2550mm controlled axes ... 4 Drive... Electric Max. ram stroke ... 215mm Main engine power ... 9kW Machine weight ... 5050kg The machine is in good condition, possible to test under power.

sheet width: 1020 mm plate thickness: 2,5 mm distance between columns: 1045 mm daylight opening: max. 47 mm bending angle max.: 135 ° weight of the machine ca.: 290 kg dimensions of the machine ca.: 1,35 x 0,86 x 1,17 m Unused exhibition machine at a special price: Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. This is an exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used-refurbished machine Unger 160 mm cutting attachment 4500 kg/h max. capacity Technical data Mixing chamber volume: 400 L Capacity approx.: 4500 kg/h Power: 35 kW (grinder motor) Electrical fuse: 125 A Dimensions: 1500x1335x1810mm Weight: 1700 kg WAW G 160 model 2000 S with mixing arm, hydraulic loader for 200 l hopper, push button operation, mixing arm, hopper volume 400 l, mixing capacity approx. 260 kg, machine weight approx. 1700 kg, hole plate diameter 160 mm, max. capacity 4500 kg/h, brand new cutting set with sorting and separating device (bone removal accessory).

Used-refurbished machine Enterprise cutter 1700 kg/h capacity 120 L mixing chamber 6 months warranty Technical data Motor power: 5,5 + 1,1 kW Power supply: 25A Feed height: 1267 mm Dimensions: 770x1350x1330 mm Weight: 480 kg

Two chamber vacuum packaging machine Komet SD 320, all stainless steel, high performance vacuum pump, electronic control, infeed plates for height adjustment.

One-hand adjustable depth of cut control Powerful 800W pneumatic motor "Made in Germany" Stainless steel saw blade cover and depth control Balanced load protects the operator's wrist Robust and low-wear gearbox Adjustable handle for better ergonomics Physical characteristics Weight 3,1 kg Diameter 160 mm Cutting depth 15-51 mm Cutting range 15-51 mm Speed 1225 /min Input Pneumatic Consumption 950 l/min Air pressure 6 bar Inlet air pressure 90 psi Output Pneumatic Power 800 watts 0,9 HP

Integrated electronic motor brake (stops in less than 3 seconds) -One-hand adjustable cutting depth control -R round handle (D-type) -SK spiral cable Physical characteristics Weight 6,3 kg Length 520 mm Width 96 mm Height 194 mm Diameter 180 mm Cutting depth 15-65 mm Cutting range 15-65 mm Drill hole 30 mm Speed 810 m/min Speed 1432 /min Electronic input Phases 1 Voltage 230 V Protection 24 IP Electronic output Power 1050 Watt (50-60Hz)/VA power_power_hp_5060hz 1.4 HP (50Hz)/VA

Engine power of the bowl, kW: 1,5 Motor power of knives, kW: 37 Bowl volume, l: 125 Bowl rotation speed, rpm: 10/ 20 Two-axis speed in cutting mode, rpm: 2000/4000 Two-axis speed in forward and reverse mixing mode, rpm: 80/160 rpm Dimensions (WxDxH) max, mm: 2140 x 1375 x 1590 Weight, kg: 2200

Size: Equipments: Robust steel frame construction for industrial loads Stack lifter Stack lift for cutting material: Paper stacks are brought to working height Ergonomic working height for operators on cutting machines or vibrating tables Suitable for cutting machines such as Polar, Wohlenberg, Perfecta Can be used on both sides – for feeding or removing stacks of paper

Restored machine Variable frequency starting for lower current surge 30kW two-axis motor power 2 selectable two-axis speeds Stepless plate speed adjustment NEW two-axis bearings and seals

Equipments: Speed: bis zu 7.000 Takte/h Envelope formats: DL - C5 Configuration: FSFi (fast feed), 6 insert stations Good condition without any damage

The machine is in good condition. Technical data: 130mm hole plate diameter 1 speed working pulley 1 speed feed screw 130 litre tank capacity Width: 1250 mm Depth: 1000 mm Height: 1550 mm Installed power: 11,0 kW, 23 A Voltage: 380 V, 50 Hz

Size: 600 x 500 mm Equipments: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Technical data Specifications are subject to change without notice. Dimensions are subject to change. Dispensing width (max.) 130 mm Dispensing height (max.) 75 mm Dispensing length (max.) ~60-280 mm Motor power 0,25 kW Voltage (3-phase) 400/50 V/Hz External dimensions (W x D x H) 616 x 1407 x 1185-1385 m

Tool diameter: mm sanding disc diameter: mm Motor output: 5 kW total power requirement: kw Weight: 1.500 kg Overall size: mm Control: cnc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 25 kVA number of controlled axis: 6 workpiece weight: 10 kg weight of the machine ca.: 1,55 t Year of construction 2020 demonstration machine, as new Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Duty cycle at max.current 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 mm cutting diameter: bis 90 mm cutting range flat: 120 x 75 mm turning speeds: 40/80 U/min miter cut: 45°/90°/-45° ° weight of the machine ca.: ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Composite system houses with 4 pcs compressor Bitzer screw Type: HSN 7471-75-40P Cooling capacity 1351KW at minus 41 °Celsius evaporation temperature. Including condenser, oil cooler, control box, etc. with Economiser. Refrigerant R404A, R507A, R449, etc. Can be used for blast freezers or freezers. Price on request 0043-6641838175 or infofrigocom.at

Specifications will follow asap

Producer TOS Tjechië Type FNK25A Table size 250 x 1300 mm Movement X=axis 800 mm Movement Y=axis 350 mm Movement Z=axis 450 mm Spindle taper SK 40 DIN 2080 movement quill 125 mm Spindle speed 56 -4500 Rev/min. Table feedrate X-Y-Z as Yes Voeding Pinole Yes Power 4 kW Dimensions L x W x H 2665 x 1980 x 226 mm Weight 1,760 Kg

Circulation/rotation Ø over bed: 475 mm Rotation/rotation Ø via cross slide: 260 mm Sledge path plan: 260 mm centre distance: 1000 / 1500 / 2000 mm power capacity: 22 kW Gear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mm spindle bore: 78 / 70 mm turning speed range (V-constant): 1 - 3.000 U/min feed range flat: 1µ - 1.000 mm/U feed range lengthwise and thread: 1µ - 2.000 mm/U Rapid traverse plan/longitudinal: 5 / 10 m/min diameter of quill: 70 mm quill travel: 120 mm quill inner cone: 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

Key data: 504 KW, 630 kVA

- Manufacturer: GSA-Elektro-Aggregate - Year of construction: 2000 - Nominal power: 630 kV - Nominal power: 504 kW - Weight: 7500 kg - Complete with day tank, exhaust system and control cabinet Diesel Engine: - Manufacturer: MTU - Type: 12V 2000 G22 - Power: 565 kW - 1500 rpm - Year of construction: 2000 Generator: - Manufacturer: AvK Germany - Type: DSG62M1-4 - 953 A - 660 kVA - 1500 rpm - Year of construction: 2000 The generator was installed as an emergency power generator and therefore only provided about 145 operating hours for test operation.

Rego Herlitzius Kobold Bread Slicer Bread Slicer 10mm 230V - Creel machine - on castors - with lubrication - Cutting width 10mm - for max. 42cm loaves of bread Specifications: - Manufacturer: HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61 cm Depth: approx. 60 cm Height: approx. 115 cm

Krohne Promass 7000 T50 - DN50 - Straight pipe - Full bore - Separate control panel - YOM 2013 - SN: G130000001602881 The flowmeter is tested and in good working condition.

Used-refurbished cutter machine 65L plate capacity Simple controls Thermometer Plate speed counter Stirring speed Speed: approx.4000 rpm Power: 20 kW Power consumption: 42 A (400V,50Hz) Wind. x Deep. x Core.: 1400x1100x1200 mm Weight: approx.1000 kg

number of controlled axis: 6 workpiece weight: 120 kg throat: 3096 mm Control: Kuka total power requirement: - kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: - m Industrial robot with deburring unit - Robot control: Type: VKR C4 - ESTA small dust extractor OM-8 - Teach panel with connection cable (visible in the control cabinet) - External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) - Mounted additional attachment on robot flange, for grinding & deburring application - Base for stationary floor mounting - Control & power cables already assembled and integrated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50,0 mm arm length: 1.350 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

Used KMT nuts original price 180 € Sale of the 13 pieces for 600 €

overhauled: 2024 Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling... 20bar ISO 40 L x W x H ... 2700x3000x2940mm Machine weight... 5500kg Magazine spaces ... 20 The machine has undergone a complete overhaul. More info on request.

Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Controling and pneumatic included Food-safe with stainless steel design Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2880 Nominal / outside width in mm: 510 Belt width in mm: 400 Driven: YES Engine type: Trommelmotor KW: 0, ...

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

Key data: 303 mm, 3830 mm

Sawing capacity at 90 degrees: Round: Ø303 mm Square WxH: 360 x 305 mm Sawing capacity at 45 degrees: Round: Ø265 mm Square WxH: 265 x 300 mm Sawing capacity at 30 degrees: Round: Ø175 mm Square WxH: 175 x 300 mm Sawing speed: 20 - 90 m/min. Saw blade: 3830 x 25 x 0.9 mm 3850 x 27 x 0.9 mm Working height: 700 mm Equipped with: - Mitre saws -Semiautomatic - Roller conveyors approx. 8 meters -Operating instructions Country of origin: Germany Motor power: 1.1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

A palletizing robot from the manufacturer KHS is being sold. The palletizer was built in 2005, but was comprehensively brought up to technical standards in 2021 in terms of safety technology, etc. The following system components are part of the palletizing robot: 1 Palettentransnort.in of the KHS EW machine 1 palletizing robot 1 pre-collection with gap dividers 1 KHS container conveyor system with loader with rotating device (gentle on the product) Portrait Magazine, Kettner Available now. If you are interested, please inquire.