rapida 72 k used for sale

Manufacturer: Berg und Schmid Kappsäge, Type: Typ Junior, Number of saw motors: 1, kW output per motor: 0,55,

Manufacturer: KEB Homag Gruppe, Model: 07.FO.RO1-4AO8, Serial number: 95120265/135514, Hz: 50/60 HZ, Power Output: 1,8 KVA,

Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,

Manufacturer: Homag, Type: KLO 76, Year: 1994, Min-max edge material mm: 0,5-3,0, Min.-max. workpiece length in mm: 150, Edgeband height max mm: 55, Min-max feed m/min: 10-25, Premilling: no, IR zone: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, radius milling: yes, 4 motors: yes, Radius scraper: yes, Flat scraper: yes, 4 motors: yes, Ersatzverleimteil : yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: yes, Roller/belt: Riemen, Compressed air bar: 6, Machine lenght mm: 7500, Noise enclosure: yes, Year :1994

Manufacturer: Paul, Type: K34 O/800 GL, Year: 2016, Alignment laser: 25 mW, Arbeitsbreite min-max.mm: 450, Arbeitshöhe min-max.mm: 26 - 52, Min.-max. working length in mm: 480 - 1.600, Saw Blade Diameter mm: 240, Working hight mm: 1.350, Cutting widht mm: 800, revlutions saw spindle rpm: 4.500, Diameter saw spindle mm: 60, Power engine kW: 75, Feeding speed max m/min: stufenlos, Inlet transport mm: 715, Year :2016

Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw<CRLF>, Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,

Manufacturer: KEB Homag Umrichter, Type: Combivert, Model: 09.F0.R11-3429, Serial number: 93410337/021161, FREE TEXT: AC-MOT 1,5 kw, Free text 1: 2/4 P, Free text 2: 50-60 Hz, Free text 3: 2,8 Kva,

Manufacturer: Perske Fräsmotor mit Nutenstein <CRLF>Mitnehmer, Type: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, pm: 2870/5870,

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Koch Winkelübergabe, Type: mit pneimatischem Überschwieber, Year: ca.1998, Working length max mm: 2000, Working widht max mm: 300, Feeding speed min m/min: 5-20, Working hight adjustable mm: yes, Year :ca.1998

Manufacturer: Kallesoe, Width mm: 1350, Length mm: 5000, FREE TEXT: With feeding KL20 and stacking line,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Manufacturer: KBM Kantenschleifmaschine, Type: KBM 3200, Year: 2013, Control: hand, Control: hand, Roller diameter D mm: ca.120, Table stop mm: ca.900, Sanding area (beam): yes, Sanding belt width max mm: 150, Sanding belt length max mm: ca.3200, Sanding unit slewable up to 45°: yes, Schleifbandgeschwindigkeit min-max m/sec: 2 Stufig, Sanding belt dimensions mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Year :2013

Hersteller : Kuhnke, Spare part from machine: Heesemann, Type: Schleifmaschine,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Control: CECC 75101-801-C064MS-G1A-3G, Serial number: B5282-B1300-G963, Axis card: 140.642.01,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Hersteller : Koop Nautic Karte, Spare part from machine: harting, Type: 0473, Serial number: 09031646921,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.69,

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,

Hersteller : Kuhnke Siemens Streckenkarte, Spare part from machine: Heesemann, Type: PC 612, Control: B5282-B1300-C963, Serial number: CECC 75101-801-C064MS-C1A-3G, Axis card: 657.452.69,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Manufacturer: Koch Windoor, Type: BL-51-NC, Year: 1997, Control: Beckhoff, Work piece width min-max mm: 30-200, Min.-max. workpiece length in mm: 100-5000, Min.-max. workpiece height in mm: 10-90, Milling spindles horizontal: 2, Milling spindles vertical: 2, Feeding speed max m/min: ca.80, Drill vertical Y: 5, Horizontal drills-X: 9, Drill gearings: 3, Drill gearings: 3, Drill gearings: 3, Number of milling spindles: 4, FREE TEXT: Dübelwerkzeuge 3, Year :1997

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: Siemens PC 612 C B5282-B1300-C963,

Manufacturer: Klingsopr, Hermes und Stracke, Designation: 1350 x 2620, FREE TEXT: alles cirka Angaben - 500er - 10 Stck / 320er - 31 Stck /240er - 20 Stck / 220er-10 Stck / 180er-36 Stck / 150er - 77 Stck / 120er - 44 Stck / 100er-22 Stck / 80er - 37 Stck / 60er-59 Stck /40er-3 Stck - meist Neu und originalverpackt ,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Type: Siemens PC 612 B5282-B1300-C963, Control: 657.452.69, Serial number: CECC 75101-801-C064MS-C1A-3G,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Manufacturer: Ilcam Kantenbearbeitung, Year: ca.1990, Monting of the machine: Verleimteil/Kappen/Vorfräsen/Zieklinge, Min-max edge material mm: 0,5-12, Work piece width min-max mm: 65, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 10-20, Premilling: no, Fine milling: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Year :ca.1990

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

Manufacturer: Klöckner Möller AMX Frequenzumrichter, Type: AMX3-460-16-400, FREE TEXT: ULN:460 F:50/60, Free text 1: UN: 460V , Free text 2: IN 16 Ampere,

Manufacturer: KEB, Type: Combivert, Model: 12.56.201, Current (A): 9 Ampere/4 Kw,

Manufacturer: KEB Homag Gruppe, Type: 07.FO.RO1-4AO8, Serial number: 95120264/135514, Hz: 50/60Hz, Power Output: 1,8 KVA,

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

Manufacturer: Kaeser, Type: AS 35, Year: 1993, Schraubenkompressor: yes, Operating hours: 44000, Volume flow m³/min: ca.3,0, Antriebsleistung kW 1: 22, Volume flow rate m³/h: 3,3, Year :1993

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Number of lamps: 3, Lampen gerade eingebaut: 3, Power per lamp watt UV: 80, Electrical power consumption kW: ca 47, Year :1995

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 17.15, Lampen gerade eingebaut: yes, Lampen von unten: no, Year :1995

Manufacturer: Perske, Type: KNS 70.12-2 D, Volt: 220/380/380, Hz 1: 50/100, Power kW: 2,2/3,3, pm: 2860/5895, Shaft dimensions L x D mm: 35 , Available: sofort,

Manufacturer: Cefla , Type: Schaltschrank Komplett, Year: 2000, war verbaut in Maschine: Cefla ROC, Länge x Breite x Höhe mm: 1000 X 1500 X 2000, without contents: Koplett mit allen Umrichtern und VT 520 G, FREE TEXT: 4 Stück Umrichter Commander SE/Control PC PCMCIA/, Year :2000

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 1 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 18 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Doppelseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 2 X 900,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000

Manufacturer: Rapid, Type: Kettenstemmer, Year: ca.1980, Min.-max. workpiece height in mm: 200-1200, Vertikal moulding unit: 1, Motor kW: ca.1,0, Travel top to down mm: 150, Travel longitudinal mm: ca.300, Max door width mm: 1200, Max. mortise hole dimensions L X W X D mm: 150 X ca.300, Drill spindles: 1, Face plate aggregate: no, Key hole boring aggregate: no, Year :ca.1980

Manufacturer: Schaltschrank Ersatz, Type: Inkl. aller Komponenten im Schrank,

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997