rapida 72 k used for sale

Width 78 cm Year of construction 2006 Round Stack Feeder RFH-82 Upstream knife shaft 6 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood without display partially overhauled (new folding rollers) Machine condition: cleaned and checked Price on request. We deliver and install worldwide!

Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg

KOMA CDS SunRiser refrigeration and proofing machine Internal dimension length 340cm x width. 240cm x H 250cm External dimensions length 350cm x width. 260cm x H 270cm

Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

NNP cooking kettles Stainless, cooking and mixing system on skid, two 350L mixing tanks, with Alfa Laval GM1 centrifugal pump and Randolph 600 series peristaltic pump, jacketed tanks, adjustable temperature and variable speed pumps, 3Ph

Traglsat: 7000kg Load center of gravity: 600mm Battery: 80V SN: T322080279

Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Nord KW: 0,25/S1 Ampere: 0,9 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides  ...

Processing plant Manufacturer: KORUMA Maschinenbau (Neuenburg) Year of construction: 1987 with processing vessel (diameter: approx. 300 mm) with 2 feed tanks, 1 of which is double-jacketed (diameter: approx. 150 mm each) with scraper agitator with sight glasses with temperature gauge with control cabinet & control mounted on a stainless steel frame very good condition LWH: 1100 x 750 x 1450 mm

Working width: 2800 mm Roller width: 3000 mm Number of rollers: 2 Stück Supporting roller - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 270 mm Roller covering - ebonit: 100 Grad shore Pressure line: 15 N / mm Pressure total: 16 to Cloth guiding system for woven fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: Links-Mitte-Rechts total power requirement: 12 kW weight: 4000 kg range L-W-H: 3,6 x 2,2 x 2,8 mm • new control system from Küsters - delivered in 2008, • with quick cleaning, • without being overhauled, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3400 mm Roller width: 3600 mm Number of rollers: 2 Stück Supporting roller - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 270 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 18 to Clouth guiding system for knitted fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: aus Edelstahl main drive motor: 15 kW total power requirement: 20 kW weight of the machine ca.: 6 t range L-W-H: 4,0 x 2,2 x 1,9 mm • 2-Bowl-Finishing-Padder with Supporting roll and S-Roll • driven expander in front of the squeezing nip, with adjustable guide roll for adaption of the enlacement at the expander roll. • Liquor trough pneumatically lift- and lowerable, with 1 guide roll at trough ent ...

Offer 24191 Specifications: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feeders infinitely adjustable - 2 stroke + 4 stroke regulation - Weld seam lengths - time setting - Hosepack air-cooled approx. 3 m - Ground cable -Reducer - Connection 400 V - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg

Perforating machine, espcially great for embroidery card punching Make Walter Kroll Model 900 Year 1960´s Working width 900 mm Tools 1 tool for Embroidery cards with 2 mm holes with 5 mm distance and 4 rows in 1 punch, 1 tear perforation tool with 1 mm holes Details this Hydraulic driven machine does have a mechanical "computer" that has so called tabs that can be put on/off and adjusted. this determines the pulling distance, also they are exchangable for another program that you can make yourself from a threaded rod. Available direct

Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

Used KEMPER Lifting Kneader, Type: F 50 SL -Refurbished- - For 50 kg flour or 80 kg dough - Engine remounted - Clock new - Switch new - V-belt new - Control system attached to the machine or wall-mounted on request - Condition: Very good, ready to use Including delivery within Germany Visits and test runs are possible by arrangement.

Used continuous cutter SEYDELMANN, type: K206 DC8 -in used condition- - Speed variably adjustable and freely programmable - 2 speeds for reverse gear 80 and 160 rpm - Lifting tipper for 200 litre wagons - Head with 6 blades - Completely made of stainless steel - Separate Micro 114 control system in VA - Condition: used, technically tested, ready for immediate use Service: - Regular maintenance - Lubrication of the main shaft - Replaced fan bearings for cooling - Inspection of the main engine - Electrical inspection - The bearings of the main shaft are in good condition Specifications: Bowl volume: 200 litres Power: max. 100 kW Machine dimensions: 2,850 x 2,950 x 1,500 mm Control dimensions: 1,200 x 500 x 1,900 mm Weight: approx. 3,000 kg Inspection and test run possible on request.

Catalog No. : 7654 Type: MT 50 Producer: KOVOSVIT Made in: 2001 Characteristic: Control system: Siemens Sinumerik 810 D Maximum-turning length: 1500 mm Turning diameter over bed (max): 500 mm Workpiece weight: 350 kg Total power demand: 30 kVA Weight: 2500 kg Equipment: Chip conveyor Tailstock Knife head

Day Tank, Diesel Tank For Ships For Sale Year of Make: 2014 Volume: 145l, 0,145m³ including sensors, hand and feed pump

Kuper FWM 630 ST Veneer gluing machine Column projection 630 mm Driving equipment Feed rate approx. 7 m/min Drive electric motor 25 watts / 230 V Heating head approx. 75 watts G&-5106-O0691

Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 3,000 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...

32 mm-5 axis Swiss Cnc lathe with moving bushing - Iemca Boss 332E barfeed new in 2008 - Syntec Control

Height 1200 mm Width 700 mm Length 930 mm Capacity 30 l Power supply: 400V 50Hz 3N Total power 3.3 kW Main Material Stainless steel, acid-resistant Stuffer Type Piston Stuffer

Pasteurizer KHS type Innopas capacity: approx. 25.000 bph with 8 pasteurizing zones working area: 113,5 m² inlet temperature: 15°C outlet temperature: ± 38°C max. pasteurization temperature: 75°C fresh water temperature: 15°C pasteurization time complete: 48,5 min. - warming time: 21,2 min - pasteurization time: 12,3 min. - back cooling time: 15,0 min. including Siemens touch panel and Siemens S 5 PLC dimensions of the pasteurizer: width: 4.210 mm length: 21.000 mm height: 2.750 mm weight netto: approx. 27.500 kgs The pasteurizer is out of production since May 2024 technical details: see pdf document already dismantled and on our stock / Germany very good condition

x-travel: 1500 mm y-travel: 1500 / 1000 mm z-travel: 975 mm Control: Fidia total power requirement: 20 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 5 x 6 x 4 m No. 3087 5-axis milling machine BOHNER & KÖHLE VH 2 / 10 K Working area: 1500 x 1500 (1000) x 975 Drive: 14 kW Control: Control Fidia V 7.2 Table 2500 x 1000 mm 16-fold tool changer Kelch Spindle holder SK 50 Spindle speeds 40-5600 min-1 Projection of milling spindle 1030 mm Weight 12500 kg Gewicht 12500 kg 13,5 Lademeter Größte Transportbreite 3 m Größte Transporthöhe 3,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kronen KG203 Vegetable Slicer completely in stainless steel with pressure flap control Three speeds, making it suitable for precise cutting of sensitive food Voltage: 230V Power: 750W Dimensions: 240x520x630H Machine can be dismantled in 30 seconds without screws Pestle and discharge wings are missing, but can be obtained easily from Kronen. Video about test run available EAN: 4251967601601