rapida 72 k used for sale

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 180/140/H170 mm -Weight: 5.6 kg

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25/H25 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 170/30/H40 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 125/20/H35 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 235/55/H50 mm -Weight: 3.5 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg

Geared motor, electric motor, electric geared motor -Speed: 259 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 32 mm -Protection class: IP 55 -Weight: 30 kg

amount: 107 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...

electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 7 kg

DC motor, geared motor, electric motor, DC, geared motor -Speed: 3000 rpm -Field 200: V 0.18 A -Anchor 180: V 0.8 A -Design: B3 -Shaft diameter: Ø 10 mm -Protection class: IP 44 -Weight: 3 kg

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating

Key data: 915 , 1144 , 380

Cummins KTA 50 G1 Diesel Generator Set Open Type. Kw:915 Kva:1144 V:380 Hz:50 Working Hours:777 Drop from factory used by emergency generator. Very good condition. For more information, pls send us an email.

-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating

Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KG5004 KB-3020-BPKG/NI -Quantity: 2 available -Price: per piece -Weight: 0.2 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -220 V 50 Hz 16 W -PN: 0-3 bar -Price: per piece -Quantity: 6 available -Weight: 0.8 kg

From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...

Pallet feeder – separating head 4 buckles 2 knives Navigator Vaculift Vacubelt A76 belt delivery

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 0.75 kW -Input: 1 x 200 - 240 V - 50/60 Hz -Output: 1.8 kVA -Number: 2x converters available Price: per piece -Weight: 3 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: AC1/3 PH 180-260 V/8.0/5.6 A -Output: AC 3 PH 0-240V/4.0A 0-1600Hz max. Price: per piece Quantity: 2 available -Weight: 2.5 kg

Centerless cylindrical grinding machine KÖNIG & Bauer M130 MULTIMAT 130 Condition: very good, used Specifications Grinding wheel rotation speeds 35/45 (60) m/sec. Largest grinding diameter 35 mm Smallest grinding diameter 0.8 mm Maximum workpiece length for continuous grinding approx. 200 mm Maximum workpiece length for plunge grinding 130 mm The machine can be viewed by arrangement in our factory in Krefeld. – Errors, modifications and prior sale excepted –

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 4 kW -Input: 380/415 V 50/60 Hz -Output: 380/415V 9.0A max. 4P 50/60Hz -Weight: 8 kg

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-04003 Type of machine Machining Center - Vertical Make BARON MAX Type KAWA SEIKI VMC 32 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis EX WORK Technical details x-travel 810 mm y-travel 510 mm Z-Travel 510 mm table surface area 1050 X 550 mm turning speed range - milling 60 - 8000 rpm control FANUC OM power capacity - milling spindle 7.5 kW tool taper BT 40 No. of tools in magazin 20 stations feed range 1 - 10000 mm/min Rapid traverse: 30 m/min total power requirement 25 kW Weight of the machine approx. 500 kg dimensions of the machine approx. 2300x2200x2600 mm Additional information nice machine WITH FANuc OM

Key data: 3020 mm, 6 mm, 750 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

Absolute encoder, incremental encoder with solid shaft -Type: 127 BA Series: 71 Price: per piece Quantity: 5 available -Weight: 0.5 kg

Key data: 100 t, 3440 mm, 3550 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

NH fuse switch disconnector -GS 3 -630 A 690 V -Dimensions: 245/250/H125 mm -Weight: 3 kg

Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm cutting range - square -: 120 x 120 mm cutting range - flat -: 300 x 40 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 245 x 40 mm mitter cutting - all-position: 90 ° cutting speed: 13 / 25 m/min control: minipos 807 total power requirement: 4,3 kW weight of the machine ca.: 850 kg dimensions of machine L x W x H: 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 7.5 kW -Input: 380/415 V 50/60 Hz -Output: 11.0KVA 380/415V 16.5A max. 7.5kW max. 50/60Hz -Dimensions: 290/520/H220 mm -Weight: 10 kg

three-phase motor, electric motor -Engine: unused -Power: 75 kW -Speed: 2955 rpm -Protection class: IP 23 -Type: B3-B5 -Shaft: Ø 60 mm -Number: 3x engines available -Price: per piece -Dimensions 900/560/H500 mm -Weight: 396 kg

Bausch + Stroebel KSF 2020 monoblock filler and screw capper, 2 filling heads with a dosing range from 0.1 to 100 ml. with the appropriate pumps, first closing station for droppers/bungs, etc., second closing station for screw caps, size range container diameter 16-55mm, height max. 135 mm, includes format parts for threaded vials GW2.5, GW5, GW10, GW15, GW25 & GW50, output up to 6,000 vials per hour, including infeed and outfeed tables

Three-phase motor, electric motor -Power: 160 kW -Speed: 2960 rpm -Voltage: 500 V (delta) -Protection class: IP 23 -Design: B3-B5 -Shaft: Ø 70 mm -see photo nameplate for further details -Weight: 830 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25 mm Price: per piece -Quantity: 1 available -Weight: 1 kg

System: KHS Type: Innofill-UM Compacta 40-10KK For bottling juice and spirits Pitch Circle : 1440 / 360 Pitch : 36 Pi Width: 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg System: KHS Type: Innofill-UM Compacta 40-10KK For filling juice and liquor Pitch circle : 1440 / 360 Pitch : 36 Pi Width : 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg

Clamp welding machine, foil welding machine -Connection: 220 V -Working width: 300 mm -Weight: 10 kg

brake cylinder -Type: BX 3602 -Dimensions: 220/200/H250 mm -Weight: 5 kg

Terminal boxes, aluminum housings, housing systems, Klippon -Type: Klippon K6 -Dimensions: 160/200/H100 mm Price: per piece -Quantity: 4x Available -Weight: 4 kg

Terminal boxes, aluminum housings, housing systems, Klippon -Type: Klippon K5 -Dimensions: 130/170/H90 mm Price: per piece -Quantity: 4x Available -Weight: 1.4 kg

Ich habe eine gebrauchte - halbautomatische Donutform zu verkaufen. Preis 1950 Euro leicht verhandelbar.

1x champagne cork orienter Cames / Kematec, used, type: P UNO E 94, built in 1994, capacity max. 5,000 corks/h, the machine ran flawlessly until the end, dimensions: D: 2.20 m, W: 1.35 m, H: 2.40 m, NP 17 ́ +, technical data see mail Kematec 22.11.19 Price: €6,900 plus VAT from stock Dolgesheim more offers..: vino-tec

Terminal boxes, aluminum housings, housing systems, Klippon -Type: Klippon K4 -Dimensions: 125/80/H75 mm Price: per piece -Quantity: 6x Available -Weight: 0.6 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Cone: Ø B11/B16 -Price: complete -Quantity: 2 available -Weight: 2 kg

Control, circuit boards, spare parts for Arburg, injection molding machines -Type: ARB 389 D KPL -Weight: 0.5 kg