rapida 72 k used for sale

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Punches e.g. 30 mm diameter in 20 mm flat bars Quick-change device Assortment of tools is included in the price Weight: 3,000 kg

max. format 40 x 57 cm Built in 1970 Single sheet feeder Conventional dampening system Price on request. We deliver and install worldwide!

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMR 71 G 2 Ex-protected -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 250/140/H185 mm -Weight: 11.4 kg

diamond core drilling machine -Drill stand -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm

We sell a Konica Minolta AccurioPrint C759 with Fiery IC-418 print controller. The machine was under maintenance contract with Konica Minolta until it was dismantled and is in very good condition. Total Counter: 534,184, Black: 226,878 and Color: 307,306 Price: VHS Preferably pick-up in Munich. Shipping on request and at an additional cost. Vat-ID. available. We have other very good and up-to-date Konica Minolta copiers in stock: 3x Konica Minolta Pro 1100, some Bizhub 3622, some Bizhub C3300i, Bizhub C250i, C360i, C550i, AccurioPrint C759 and AccurioPrint C750i etc.

Bezel, steady rest, lynette -Steady: for crankshaft grinding machine -Dimensions: see photos -Dimensions: 420/110/H270 mm -Weight: 20.8 kg

We sell a current model of Konica Minolta AccurioPrint C750i Flux with booklet finisher. Low meter reading. The copier was under maintenance at Konica Minolta until it was dismantled and is in very good condition. Konica Minolta AccurioPrint C750i Flux with Finisher Booklet Finisher FS-539 SD, Punch Kit PK-524 and RU-519 Relay Unit. Total counter: 156,620, black: 62,867 and color: 93,753. Preferably pick-up at our warehouse in Munich. Shipping on request and assumption of costs. We have other current models from Konica Minolta: Bizhub 3622, C3300i, C250i, C360i, C450i, C550i, AccurioPrint C759 etc. Also 3x Konica Minolta Pro 1100. Ask us, we will get back to you as soon as possible.

-Manufacturer: Knecht Maschinenbau GmbH -Type: VS-324 -Year of construction 12 / 2007 -4.61 kW -12.16 A -400 volts -50 Hz

Length 5000mm Web width 395mm

See appendix for the current complete inventory list. Sellers of different models, types and sizes. For deep freezing, plus cooling and air conditioning. With or without defrosting, different slat widths. Models such as: SG, SP, DE, DZ, DF, DP Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at Website: frigocom.at

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.

Maximum sheet size 660 x 1280 mm, Pallet feeder, 4 buckles first unit, First cross knife (8 pages) Second cross knife ( 16 pages) parallel buckle to the first cross knife. SB-46/MP.D Press delivery. Noise hoods, Pump, Technical documentation, Standard tools. Intergrated counter.

16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: KEB, spur gear motor type G 1.2 C DK 63 G 4 /TS140 -Speed: 36 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 345/125/H185 mm -Weight: 12.3 kg

trolley -Simple bucket -Flat press -2x shelves for microfiber mops

Product number: 2859 Type: K64DC8Q-VA Serial number: 99099-1 Year of construction: 1999 Bowl: 65 litres Knives: variable speeds Bowl: 2 speeds Steam: 1.5 Bar, 55 kg/h Vacuumpump: Elmo 2BV2071, 125 m³/h Power: 3 x 400V, 50Hz, 50kW Dimensions: 1750 x 1950 x 2000 mm Weight: 1700 kg With unloader, water dosing, tempurate indicator

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Grinding wheel mount, standard flanges, special flanges, grinding wheel flange -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 45-58 mm -Number: 3x mounting flanges available -Price: per piece -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Quantity: 1x mounting flange available -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Zinser, Burner set in a metal box -Burner sizes: No. 00 to No. 4 (max. 9 mm) -Cutting torch: A -Accessories: see pictures -Dimensions case: 320/200/H65 mm -Weight: 2.8 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Piller Blower 63790 KKX 90710 Air blower of 2018, like new, complete with control system, 1 available. 26.5 m3/s, 15 bar, 445 kW Blower Piller 63790 KKX 90710 Manufacturer: Piller Model No.: 63790 KKX 90710 Serial Number: 903736 Type: Air Blower Power [kW]: 445 Flow rate [m3/s]: 26.5 Pressure max [bar]: 15 Year of construction: 2018 Weight [kg]: 8.587

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm -Passage: Ø 49 mm -Recording: MK4 -Jaws: individually and fully adjustable -Dimensions total: Ø 165 x 230 mm -Weight: 13.6 kg

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 40-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.8 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 7,3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-59 mm -Type name: 508x10-100x127 / 508x10-80x127 -Dimensions total Ø 190 x 100 mm -Weight: 7.7 kg

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-49 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.6 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 34-43 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7 kg

Control: KASTO Max.cutting range: 400 x 400 mm Cutting speed:20 ? 110 m/min Saw band dimension: 5700 x 41 x 1.3 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Germany

impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length in total: ca. 3500 mm band width: ca. 700 mm conveying height: ca. 1200 ejection height approx.: 1200 mm dimensions of the machine ca.: ca. 3500 x 1300 x 1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell here a vacuum sealer from the manufacturer Komet, type S 501 in a very good used and functional condition. The device runs on 400 volts, 3.5 kW, large chamber W/D/H 80/50/23 cm, electric lid opening, Busch vacuum pump 160 cbm/h, fumigation, rollable, workshop tested, ready for immediate use, dimensions W/D/H 100/75/120 cm, others on request.

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 46-59 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7,1 kg

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree shart corner. (Dovrie) Available direct

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 5550 ( 4750 + 800 ) Nominal / outside width in mm: 885 Belt width in mm:  ...

live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 100 x 225 mm -Weight: 2 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 30-39 mm -Type designation: not available -Dimensions total Ø 180 x 75 mm -Weight: 5.9 kg

Auxiliary vehicle, type KW1VEK Bearing No.: akw885 Make: Möhringer Year of construction: 1997 Part number: 126 422 00 Specifications: Gauge: 980 (mm) Support height: 420 (mm) - Reinforced design - Circumferential chain - Driven by worm gear motor with built-in slipper clutch - Tilting stool - Adjustable trunk holder - Cables and cable balancing

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 50-60 mm -Type designation: not available -Dimensions total Ø 180 x 90 mm -Weight: 8 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 56-59 mm -Type designation: not available -Dimensions total Ø 260 x 120 mm -Weight: 14.3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 49-64 mm -Type designation: not available -Dimensions total Ø 210 x 125 mm -Weight: 10.9 kg