rapida 72 k used for sale

• With precision balance Sartorius BP 61S • Measuring capacity >5 tbl./min. (BP 61S) • Tablet Ø max. 20 mm • Tablet height 1-12.5 mm • Max. tablet weight Tablet weight 30 g • Weighing range 61 g (BP 61S) • Readability 0.0001 g (BP 61S) • Interface RS 232 (RS 485 via external converter) for transmission of measured data to the control unit of a Kilian tablet press • Compatible with Kilian monitors CW 100/200 and the controllers C 50/52 IPC and VICON • Connection 220V/50Hz

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor -Manufacturer: Parker, sensor closer unused Ovp -Type: KL3183 -Voltage: 10-200V -Number: 112x sensor available -Price per piece -Dimensions rolled up: Ø 90 x 10 mm -Weight: 0.1 kg/piece

Rheon Cornucopia KN551 Year of construction 2019 with accessories Weight range: 10-300gr Product length: up to 500mm Maximum output for small products: 100 pcs/min. Output: 600~max. 6000 pcs./h different shapes of dough pieces Belt speed: 78~1320 m/h Extrusion capacity: max. 400 kg/h very good condition Height: 155cm Width with ribbon: 175cm Depth: 100cm

Aluminum adhesive tape, aluminum tape, aluminum tape -Manufacturer: kip, ALU-Band 345 DIN-4102-B1 -Type: ALU 901 AC -Length: 50 m -Width: 50 mm -Thickness: 30 mm -Quantity: 5 rolls available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: Ø116 x 50 mm -Weight: 0.5 kg/piece

Welding smoke filter, welding smoke extraction, soldering smoke extraction, mobile filter unit, welding smoke extractor -Manufacturer: Kemper, mobile welding fume extraction -Drive: 1.1 kW -Volume flow: 1000 m³/h -Extraction arm: Ø 150 mm x 3260 mm -Machine dimensions: 710/655/H1400 mm -Weight: 130 kg

Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.

Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg

Shelf tray, drip tray, floor tray, pallet tray, drip container, drip pallet -Manufacturer: Bauer, steel collecting tray, small container tray type KGW2 LB galvanized -Collecting volume: 25 liters -Material: S235JR sheet steel, galvanized, thickness 3 -Dimensions: 940/470/H60 mm -Weight: 21.5 kg

5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204

Product number: 2828 Type: BMB600 Serial number: 11 Belt width: 400 mm Power: 3 x 380V, 50Hz, 1.01kW Dimensions: 2050 x 1200 x 1950 mm Weight: 240 kg Rolling machine for ragout balls (bitterballen)

Seydelmann K40 Bowl cutter 2008, Stainless bowl cutter, three blade assembly, variable speed, timer and temperature controls, 3Ph

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Used stainless steel Z mixer / kneader. Mixer after complete service, all operating components have been replaced.

Gearbox, spur gear, angle gear, worm gear -Manufacturer:Laipple / KEB, worm gear type NMS30 -Translation: i= 7.5/1 -Hollow shafts: Ø 9 x 22 mm / Ø 14 x 63 mm -Dimensions: 96/80/H110mm -Weight: 1.1 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: KEB, spur gear motor type G 2.2A DK 80 G 4 F -Speed: 84 rpm -Power: 0.75 kW -Shaft: Ø 25 x 50 mm -Protection class: IP55 -Dimensions: 480/180/H175mm -Weight: 21.8 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Corrugated pipe, plastic hose, empty pipe -KG Pipe: Bend 15° KG 2000 Polypropylene 4 pieces -Type: KGB DN 110x15° -Nominal diameter: 110 mm / inner diameter 104 mm -Delivery/Price: complete -Dimensions: Ø 130 x 190 mm -Weight: 0.4 kg/piece

Cable reel, cable unwinder, power cable reel, cable reel, workshop reel, cable drum, wall cable drum, workshop cable drum, wall reel -Manufacturer: Zeca, cable drum cable reel -Cable: 12-core, length: 50 m -Hole diameter: 180 x 10 mm -Dimensions: 715/480/H800mm -Weight: 73 kg

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water-cooled -Length: 4.0 m -Quantity: 1x hose package available -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 3,2 m -Weight: 2,7 kg

6 axes Load capacity 120 kg

number of controlled axis: 6 workpiece weight: 210 kg throat: 2697 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Coma Freezer Cell Freezer Cell Freezer Room Internal dimensions: 210cm wide 285cm Depth 203cm high Dimensions: 250cm wide 340cm deep 283cm tall

Robot KUKA KR 45/2 only mechanics ZH30/45-II Number of axles: 6 Max. load capacity: 30/45 kg Max. working range: approx. 2033 mm Year of construction: 1999 Scope of delivery: robot mechanics and connection cable 2 weeks start-up warranty. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited.

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

electric clutch brake, clutch/brake combination, clutch-brake combination, -Manufacturer: KEB, clutch-brake combination -Type: Combibox see photo type plate -Voltage: 24 V -Shafts: Ø 19 x 40 mm -Bolt circle: Ø 90 mm / M8 -Dimension: 240/125/H155 mm -Weight: 3.8 kg

7-segment display, LED display, digital display -Manufacturer: Kingbright, 7-segment display / box with 40 pieces -Type: SA52-11EWA -Character height: 13.2 mm / red -Price/Delivery: complete -Box dimensions: 530/25/H20 mm -Weight: 0.1 kg

crane fork, loading fork, load fork, pallet fork, pallet crane fork -Crane fork: with manual balancing -Load capacity: kg -Tine length: 730 mm -manual weight compensation -Fork: adjustable up to 1040 mm -Useful height: adjustable 1170 to 1960 mm -Dimensions: 1060/865/H1130 mm -Own weight: 108 kg

Brezel-Verlängerung, funktionstüchtig

Heat exchanger, heat exchanger, rotary heat exchanger, exhaust air heat exchanger Heat exchanger: air/air -Manufacturer: Klingenburg, rotary heat exchanger type RRSE 4066/2750 -Rotor: Diameter: 2570 mm -Speed: 8 rpm -Dimensions: 4066/2750/H460 mm -Weight: 850kg

Scoring circular saw blade, Scoring circular saw blades -Manufacturer: KBK, circular saw blade type 160x4.1-5.2x30 Z 28 -Carbide tipped -Box dimensions: 260/230/H60 mm -Weight: 1.2 kg

loudspeaker, Waterlight Horn -Manufacturer: Kemmler, Loudspeaker -Type. ZS 0541 T330 ML 24V -Volume: 69 to 77 d BA -Dimensions: 130/90/H50 mm -Weight: 0.2 kg

Bowl cutter Kramer+Grebe SM 80 Overhauled Technical data overall dimensions 2000x1150x1800 mm; bowl 80 ltr; power supply 400 V, 50 Hz; power: main motor 15/20 kW; bowl motor 1,1/1,4 kW; mixing motor 1,3/1,8 kW; unloader motor 0,75 kW; 2 knives speeds 1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; weight 1500 kg

Since we don't use this device enough, we sell this super forklift with Volvo engine!

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Shaft: Ø 16 x 400 mm -Dimensions: Ø 97 x 570 mm -Weight: 3.9 kg

Pressure gauge, flow meter, measurement and control technology, liquid flow meter, float switch, flow monitor -Manufacturer: Kobold, flow meter flow monitor -Type: 70-75 -Dimensions: 160/40/H90 mm -Weight: 1.7 kg

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Proximity switch: Namur sensor -Type: IT-PB1-NS/K61 -Number: 1x sensor available -Dimensions: Ø 45 x 20 mm -Weight: 0.1 kg

spindle diameter: 120 mm x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm turning speeds: 19-1900 U/min table-size: 600x1200 mm table load: 2000 kg spindle taper ISO: 50 : Feed: 0,042-1,46 mm/U weight of the machine ca.: . t dimensions of the machine ca.: . m Tool holder: Steep taper No. 50 Din 2080 3.5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: Abus Kran Systeme Type: GM1 250.6-111 Model: S13371 Serial Number: D780103/0009 Construction year: 1997 Weight: 40 kg Power: 50Hz Lifting capacity 250 kg Length mm: min 400mm - 5000 Width mm: 400 Height mm: 400 Working height: variable Maximum speed: 1.5/6.0 m/min Condition machine : Used Electric. Connection: 16A

Linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped -Rail length: 640 mm -Total width: 37 mm -Rail height: 20/10 mm -Dimensions: in the pictures -Dimensions: 640/37/H20 mm -Weight: 2.1 kg

linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70230100700 210792 /10 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm -Weight: 1.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear unit -Type: 70130100700 210792 /20 -Travel: 500 mm -Shaft: Ø 8 x 25 mm -Dimensions: Ø 30 x 725 mm -Weight: 1.7 kg

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

Dovetail guide wedge bar, linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped for dovetail guide -Rail length: 620 mm -Total width: 31 mm -Rail height: 15/3 mm -Dimensions: 620/31/H15 mm -Weight: 0.8 kg