129,481 used machines on RESALE, but how to find them? Machine Search
Three-phase motor, electric motor -Power: 2.5 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B35 -Protection class: IP 54 -Dimensions: 395/250/H270 mm -Weight: 30 kg
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3000 kg -Chain length: 1.5 m -Number: 1x chain hoists available -Price: per piece -Dimensions: 700/170/H190 mm -Weight: 19 kg
Three-phase motor with 2 speeds, electric motor -Power: 4/5 kW -Speed: 930/1445 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -pole changing -Protection class: IP 33 -Dimensions: 585/400/H325 mm -Weight: 110 kg
2 x KRONES SPIRIT / WHISKEY FILLING LINES LINE 6: CAPACITY: 6,600 BPH ON 1.75 LTR BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr, 1.5ltr, 1.75ltr LINE 7: CAPACITY: 12,600 BPH ON 70CL BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr Location: Glasgow, UK.
We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow
Three-phase motor, electric motor -Power: 0.25 kW -Voltage: 230/400 V -Speed: 900 - 920 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP 56 -Dimensions: 205/130/H170 mm -Weight: 8.3 kg
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 19 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 260/180/H150 mm -Weight: 6.1 kg
Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle
Three-phase motor, electric motor -Power: 1.8 kW -Speed: 1700 rpm -Shaft: Ø 18 x 40 mm -Construction: B3 -Dimensions: 290/270/H190 mm -Weight: 14.2 kg
Capacity, ton 1000 Slider stroke, mm 400 Unattainable stroke, mm 12 Slider strokes, spm 20 Shut height, mm 730 Distance adjustment between table and slider, mm 200 Slider size, mm 1200 x 1200 Table size, mm 1250 x 1250 Table gap size, mm 800 x 800 Bolster plate thickness, mm 260 Pneumatic cushion capacity (eject), ton 40 Pneumatic cushion stroke, mm 160 Pneumatic cushion load, kg 4500 Main power drive, kW 75 Voltage, V 340 Machine dimensions, mm 4310 x 3820 x 6790 Machine weight, kg 77100
Bezel, setting stick, lynette -for: Crankshaft grinding machine -Max. flow rate: Ø mm -Peak height: 245 mm -Technical drawing: see photos Quantity: 1 piece available -Weight: 22 kg
Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400
Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg
Electric motor, three-phase motor -Power: 3.7 kW -Speed: 1430 rpm -Shaft: Ø 32 x 50 mm -Construction: B3 -Dimensions: 400/295/H350 mm -Weight: 85 kg
Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 750 kg -Chain length: 1.7 m -Dimensions: 600/115/H145 mm -Weight: 9 kg
offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg
TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support
Crimping jaws, crimping tools for cable end sleeves, wire end sleeves, cable lugs -for: cable end sleeves -Sizes: approx. Up to 28 mm² -in the suitcase -Dimensions: 490/300/H70 mm -Weight: 22.4 kg
Measuring device for air conditioning units, air conditioning systems, cooling units -Type: -with: various hoses -Foot: pressure pump -Number: 1x measuring devices with suitcases available -Price: per piece -Dimensions: 340/130/H260 mm -Weight: 5.3 kg
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg
Ratchet tensioner for chain, safety chain, excavator safety, load safety -Load capacity: 2200 kg -Number: 4x available -Price: per piece -Dimensions: 275/280/H50 mm -Weight: 1.8 kg/each
Three-phase motor, electric motor -Power: 10 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: EX -Dimensions: 550/440/H315 mm -Weight: 113 kg
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg
The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.
throat: . mm tool adaptor: SK50 power requirement: . kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Travel: 450 mm -Piston diameter: 25 mm -Dimensions: 40/40/H650 mm -Weight: 1.6 kg
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1415 rpm -Shaft: Ø 22 x 47 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 347/198/H220 mm -Weight: 27.3 kg
weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1400 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 250/200/H210 mm -Weight: 12 kg
Three-phase motor, electric motor -Power: 24 kW -Speed: 1480 rpm -Shaft: Ø 55 x 105 mm -Design: B3 -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 760/500/H390 mm -Weight: 251 kg
Three-phase motor, electric motor -Power: 2.5/1.5 kW -Speed: 1420/2930 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 480/210/H230 mm -Weight: 39 kg
weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 x 25 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 180/114/H155 mm -Weight: 5 kg
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 920 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 250/166/H185 mm -Weight: 11 kg
Three-phase motor, electric motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 190/110/H155 mm -Weight: 4.9 kg
Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters
Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 470/216/H165 mm -Weight: 36 kg
Electric motor, light current motor -Power: 0.37 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Design: B5 -Protection class -Dimensions: 265/143/H143mm -Weight: 9.4 kg
Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg
Industrial robot Manufacturer: Kuka Type: KR30-3 Year of construction: 2011 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka Control KRC4 Weight: 150 kg Software V8.3.40 Kuka Touch Panel Kuka Interconnectors
High-speed high-temperature system with adjustable heat holder The machine can be started in a closed system or via supply tanks with pump control. Control via Siemens S7
Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg
Industrial robot Manufacturer: Kuka Type: KR16-2 Year of construction 2014/2015 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka Control KRC4 Year of construction 2015 Weight: 145 kg Software version V8.3.40 Kuka Touch Panel Kuka Interconnectors
Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg
maximum number of results exceeded
please refine your search
