126,706 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 16780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000
; Gross weight [kg]: 9780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450
; Gross weight [kg]: 8950; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1360
Automatic Transfer Switch - ATS Panel - ATI Panel, 1.600 Ampere - Applicable for generators up to 1.100kVA; Gross weight [kg]: 215
Automatic Transfer Switch - ATS Panel - ATI Panel, 2.000 Ampere - Applicable for generators up to 1.380 kVA; Gross weight [kg]: 330
liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic Transfer Switch - ATS Panel - ATI Panel, 2.500 Ampere - Applicable for generators up to 1.730 kVA; Gross weight [kg]: 311
external diameter: 762 mm internal diameter: 304,8 mm width: 36 - 42 - 64 mm Unused grinding wheels Ø 762x304,8 mm! 2x36 mm width Norton 1x64 mm width Norton 1x42 mm width Krebs 4x64 mm width Krebs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reference ID: PP-55241 Category: CI Flexo Printer Manufacturer: Fischer & Krecke Model: Flexpress 16S-10k Year Built: 2005 Number of Colors: 10 Working Hours: – Max. Mechanical Speed: 400 m/min Max. Printing Width: 1050 mm Condition: Good Location: Europe Availability: Immediately ________________________________________ Machine Description CI Flexo Printing Press • Geared/Gearless: Gearless • Substrates: PE, PP, OPP, PET, Paper • Printing Width: 1050 mm • Material Width: 1100 mm • Print Repeat: 350 mm – 750 mm • Mechanical Speed: Up to 400 m/min ________________________________________ Unwinder • Turret unwinder – non-stop • Max. roll diameter: 1000 mm • Expanding Shafts: 3", 5" Winder • Double unwinding shaft with dancing rollers • Max. roll diameter: 1000 mm • Expanding Shafts: 3", 5" ________________________________________ ...
KBA RA 106-8 (2011) Reference ID: PP-55332 Category: 8-Colors Manufacturer: KBA Model: Rapida 106-8 Year Built: 2011 Colors: 8 Condition: Good Location: Europe Availability: Immediately Impressions: 292 Million ________________________________________ TECHNICAL DATA Sheet Size • Max.: 710 × 1,040 mm ________________________________________ MACHINE CONFIGURATION & FEATURES • 8-color printing press • Sensor-controlled feeder system • SPC – Simultaneous Plate Changing (all units) • Kersten high-performance anti-static system • Intercom system between feeder and delivery • Baldwin blanket washing system • QCC inline densitometer, capable of colour measurement during operation ADDITIONAL EQUIPMENT & FEATURES • Ink mixer with 4-colour Technotrans pump • Automatic colour density measurement with 2 inline cameras • KBA jackets on impression ...
; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). 2x units available Working Description King TB-4 semi-automatic tablet, capsule and pill 2-channel counter with electronic counting mechanism, of a convenient compact bench top / tabletop design; maximum output – for tablets: up to 2000 tablet/minute (with 5mm tablet DIA); for capsules: up to 1200 capsules/minute. Comes with 2 Filling Stations. Single operator required only. Finished in polished finish stainless steel. Product hopper with top cover and vibration frequency control of product onto the feed chute (with adjustable height out-feed control plate). Mounted onto a stainless-steel frame. The TB-4 model is a benchmark standard machine in Pharmaceutical, Medical and Nutrition and is an extremely versatile and accurate tabl ...
x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...
Key data: 40 t, 1030 mm
For sale is an automated press brake with 1st hand robot system for serial sheet metal part forming. Press brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Specifications Press brake - Press force: 400kN (40t) - Working length: 1030mm - Control: ByVision Robot - Max. nominal load capacity: 11kg - Reach: 1100mm - Axles: 6-axle - Position repeatability: 0.02mm - CE certified safety modules Characteristics - Fully automated bending cell with integrated 6-axis industrial robot - from 1st hand - Dimensions (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending control terminal with 22-inch Full HD touchscreen Machine condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically perfect condition - Functional test: can be demonstrated during inspection - Location: Niederroh ...
used
B 60 W BP CAN (ROLLER) walk-behind scrubber drier The B 60 W Bp Can walk-behind scrubber dryer is equipped with a travel drive, a maintenance-free 120 Ah battery (2 pieces) and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against misuse. The machine is ideal for cleaning textured floors and can cover areas up to 2,500 square meters. The brushes are quick and easy to install and replace. Thanks to the eco!efficiency level, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. Trailing scrubber drier (60 l) with travel drive. Ideal for 1000 - 2500 m². Energy-saving eco! - efficiency level Proven double disc technology ■ Brush heads are quickly mounted or replaced. Powerful drive ■ Comfortab ...
Warranty:, 1 year for continuous use, 2 years for standby use, Surplus unused 2022 generator., 2 similar units in stock; Gross weight [kg]: 1057; Engine: Cummins X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71
Surplus unused 2022 generator set.; Gross weight [kg]: 6345; Engine: Cummins QSK23-G3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 132
Used Deutz A12L614 diesel engine Year of construction : 1955 Air-cooled 12 cylinders 180 hp Clutch power : 132,39 KW Engine has run after major revision only very few hours !
; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380
Box washer, Fabr. Drill, type: R 20, in VA, with hinge belt transport chain, pump, 2 VA screens, control cabinet, YOC 1989 Box washer, Fabr. Klann, type: 600, with large pump, with screening box with 3 VA screens, YOC 1988, dismantled Box washer, Fabr. Kettner/Sotec, Type: WAH 18, 1,800 Ka/h, with control cabinet, YOC 1990 Prices on request
saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock
Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam ...
TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Description: Bucket chain excavator Type: Floating Type: KS 250 Year of Make: 2007 Bucket capacity: 250 lit. Conveying capacity: approx. 800 t/h (depending on the material) Bucket Shakes Adjustable: 8 to 34/min Bucket ladder length: approx. 37.0 m Dredging depth: approx. 16.0 m under water Bucket chain drive: 2 x 90 kW Bar grate gap width: 200 mm (pre-screening) Number of crosswinds: 4 pcs. Number of advance winches: 1 pc. Drive power bucket ladder winch: 37 kW Ladder lifting speed: 2.20 m/min Drive Type: Electric Operating voltage: 3/400/230V/NPE, 50 Hz Control voltage: 230 VAC, 24 VDC Power supply: Medium voltage 10 kV to rated voltage 400V Cast resin transformer Rated power: 630 kVA Total installed power (drives): approx. 291 kW Control: SIEMENS type SIMATIC S7- 300 Excavator discharge belt: AA = 11.0 ...
Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...
; Gross weight [kg]: 1237; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219
KIMLA BPF 2070 CNC router was built in 2010 in Poland by POLCOM Przemysław Kimla. The machine is used for precision machining of parts made of such materials as wood, plastics and aluminium. The machining process is performed on a large work table with a length of 7050 mm and a width of 2085 mm by means of a reliable, high-speed spindle. Process stability, on the other hand, is ensured by an extremely rigid design that effectively eliminates any vibration and oscillation during even the most intense challenges. All this is complemented by an industrial CNC controller with easy-to-use PC-CAM software. The BPF 2070 CNC milling machine weighs 6000 kg. Technical specifications of the KIMLA BPF 2070 milling machine - machinable materials: wood, plywood, polycarbonate, polymer plates, aluminium, etc. - feed in the X/Y/Z axis: 2085/7050/500 mm - work area (L x W): 7050 x 2085 mm - maxim ...
Linear weighing and mixing machine, for mixing four different products - ideal for e.g. seeds, tea, muesli, nuts, pasta, sugar, salt, rice, general granular, granular products. The rotary version has a longer vibration path, which allows the particles to be better separated from each other, thus reducing the risk of jams. SPECIFICATIONS 2-HEAD SCALE: - 4 weighing heads each 0.5 litres, max. 300g/head - Weighing container capacity: 500 ml - Hopper: 8 l - Weight range: 5-300g - Accuracy: +/- 1.5-5g - Max. machine cycle rate at idle: 70 cycles/minute - Electricity: 220V, 1.2kW - Machine dimensions: L1028xW1078xH825mm -Condition: Year of construction 2024, but UNUSED AMTEC PLATF-SML - Frame/platform/rack for 4-head weighing systems - Feet and casters included - Frame dimensions: H 2660 x W 1350 x D 1000 m FOOT SWITCH: To open the weighing head during semi-automati ...
cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 cloth press 1,0 m cloth width capacity: up to max. 4 t with top fruit
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober antique manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 620 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: maybe between 1930 - 1940 work width: 620 mm different: with wooden cooling tunnel, approx. 8m fixed mass container We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, unpacked
Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.
maximum number of results exceeded
please refine your search
