rapida 72 k used for sale

Key data: 268 KW, 335 kVA, 230 V

Produced in the EU 30 months warranty Generator Set Specifications: Model: EQ-H335268 Emergency power output: 335 kVA / 268 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP086CE Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250MI10AI Generator dimensions (closed): Length: 3800 mm Width: 1300 mm Height: 2200 mm Weight open: 2950 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator (Model: AG10-250MI10AI) ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank housed ...

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.

Open spray level 2x2.1x2.2 The overspray in powdering is absorbed via the suction unit. The powder spray stand is delivered on rollers and is thus mobile. - The suction is equipped with a 60 L powder container (rollbar). - The first stage is 4 filters in the suction system. - Above the cabin is the Absolute filter. 1. Dimensions of the powder level width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m3/h Electric motor 3.0 kW 3. Filter 325x600 4 pcs. Type Filter cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type pocket filter

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 3,500 x 1,900 x 2,000 mm electric 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 3,500 x 1,900 x 2,000 mm gas operation 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW = 49,880 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 burner 1 pc. oven is heated with gas burner. 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 4,500 x 1,900 x 2,000 mm electric 1 inner dimension length 4,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m3/hr 10 Electric motors 2 pcs. 2x 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 74 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual f ...

- Three mobile knives units for additional knife fold - Can be used on combi or buckle folders for various configurations ( Mbo, Stahl, etc. )

Ground meat portionning line Mado Category Used meat processing machines Subcategory Lines Type Lines Height 950 Width 1100 mm Length 2700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel

Komori GL 40 L 16,500 sheets per hour Plate format: 800 x 1030 mm Maximum paper size: 720 x 1030 mm Blanket size: 920 x 1040 mm Maximum print format: 710 x 1020 mm Stacking height feeder: 1150 mm Paper thickness (skeleton): 0.06–1.0 mm IR dryer Stacking height delivery: 1150 mm KID: Color zone pre-profiling PCC: Prepress interface PDC-SG: Spectral Density Control Display: Extended with infrared dryer Automation: Semi-automatic plate changing (SAPC) Cleaning by spray jet with solvent under pressure: Paint application roller Dampening roller Inspection of the vibrating rollers Continuous feeder Communication via intercom Located: Europe Eastern

For sale: electrical cabinet producer Krones 400 V 50 Hz 103A ICW/ ICU : - / 35k A

; Gross weight [kg]: 1775; Engine: 4TNV98CT-IYE; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 210

; Gross weight [kg]: 1395; Engine: 4TNV88-BIB; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Housing; Water Tank Volume [l]: 175

; Gross weight [kg]: 4520; Engine: Volvo TWD1645GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 897

; Gross weight [kg]: 13000; Engine: DC16 320A 02/63; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 2500

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

Goring Kerr DSP2 Metal detector Stainless frame, belt dimension 2400mm x 200mm, aperture 300mm x 100mm, pneumatic blow reject into reject bin, 3Ph

; Gross weight [kg]: 13000; Engine: DC13 320A 02/62; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super silent Canopy; Water Tank Volume [l]: 2500

; Gross weight [kg]: 5500; Engine: DC 09 320 02/61; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 1200

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

; Gross weight [kg]: 4950; Engine: Cummins QSZ13-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant Heater and Battery Charger; Water Tank Volume [l]: 775

Goring Kerr Metal detector Model: DSP2 Serial: 56692 Stainless frame, variable speed, belt dimension 1950mm x 260mm, aperture 350mm x 130mm, pneumatic push arm reject into reject bin, 3Ph

Cummins KTA50 D(M1) Marine Generator Set Stamford 1491 kva 60 Hz 3 Phase 2002 Model caglar@dortelgemi

Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed.  ...

KIMLA BPF 2131 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large work table by means of a powerful, high-speed spindle. The offer also includes a set of tool holders. The KIMLA CNC milling machine weighs 3100 kg. Technical data of the KIMLA BPF 2131 milling machine - machined materials: mild metals, wood, wood-based materials, plastics, etc. - CNC controller - work table dimensions (L x W): 3100 x 2100 mm - air pressure: 8 bar - power: 14 kW - power supply: 400 V; 50 Hz - weight of the BPF 2131 machine: 3100 kg

Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

Approx. 14 tons different Pumps

Key data: 1550 mm, 3 mm

Machine Type: Guillotine Shears Manufacturer: KRAMER Type: TM1a Year of Make: 1987 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-KRA-1025-1 DESCRIPTION We offer you a used guillotine shears from the manufacturer Kramer. Expected to be available from 10/07/2025 Cutting width max. 1550mm Cutting capacity max. 3.25mm Back gauge 550mm Weight 2065kg Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Qty. 1 Second-hand aluminium strip casting line – stopped in 1/2020 Manufacturer: Shinkwang Type: 2 Roll Casting Built: 2013 Strip Width: 420 - 1,010 mm Strip Thickness: 5∼7 mm Line Speed: 2 m/min (max) Coil Weight: 7,000 kg (max) Power: 45 kW (DC) Cooling Water: 550 m³/h

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

Type Smokehouses Height 2150 Width 1400 mm Length 1150 mm Voltage Electrical: 400V 50Hz 3N Installed Power 13 kw Main material Stainlees Steel Smokegenerator type Detached, woodchips Trolleys per batch 1 pc Standard Trolley (1000 x 1000 x 2000 mm) No Non-standard trolley dimentions 1050 x 900 x 1500 Smokehouse functions: Drying and smoking Smokehouse functions Smoking only Smokehouse function Brewing Smokehouse function Ventilation

; Gross weight [kg]: 4100; Engine: Volvo TAD1345GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

Engine serial nr.: NYJ00480, Generator set serial nr.: K7F00641, Generator serial nr.: 74B0080; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

Used cartoner Höfliger + Karg (Bosch) CARTONETTA. New 1975. Dimensions: lenght 2850 mm + ca. 3000 mm conveyor width 1100 mm height 1600 mm weight 450 kg. Voltage: 380V with a power socket Machine speed: up to 50 cartons per minute Folding the leaflet: 3 or 4 fold the sheet. Dimensions for folding leaflets: 3 - fold: from 90 x 90mm to 210 x 210mm 4 - fold: from 90 x 90mm to 297 x 210mm Carton length: 50 - 180mm Carton width: 15 - 80mm Carton height: 16 - 60mm