128,855 used machines on RESALE, but how to find them? Machine Search
Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side ...
Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7900 ( 7200 + 700 ) Nominal / outside width in ...
-type: HF 727075 -Shaft: Ø 16 mm, height of shaft axis 70 mm -Base plate: hole spacing 165/150 mm / M16 -Number: 8x bearing block available -Price: per piece -Dimensions: 210/200/H100 mm -Weight: 5.2 kg/piece
-type: HF 727091 -Shaft: Ø 25 mm, height of shaft axis 80 mm -Base plate: hole spacing 180/180 mm / M20 -Quantity: 1x bearing block available -Dimensions: 250/230/H115 mm -Weight: 8.8 kg
CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...
saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg
saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg
saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 72, see photos -Weight: 26 kg
saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photos -Weight: 26 kg
x-travel: 725 mm y-travel: 525 mm z-travel: 505 mm table-size: 1000 x 500 mm table load capacity: 500 kp spindle taper ISO: 40 quill stroke: 80 mm spindle turning speed range: 25 - 5000 U/min voltage: 400 V tool changer made by:: Kelch 20-fach CNC-control: PHILIPS 3460 power capacity - milling spindle: 10 kW total power requirement: 18 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,60 x 3,80 x 2,35 m Rigid machine for heavy machining. Machine was last time under power 8 years ago. Machine parameters must be reloaded to RAM. Machine is sold as it is (not working), no guarantee. For spare part use or reconditioning / retrofit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lippert rising falling Incline belt conveyor GF 720+11450+850-750-600 RA2263 Technical data: Conveyor length (NL): 13020 mm ( 850 mm forerun + 11450 mm ascending belt + 720 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 13020 ( 850 + 11450 + 720 ) Nominal / outside width in mm: 750 Belt w ...
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -11 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 238 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -11 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 206 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -12 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 210 kg
Key data: 3200 , 700 , 60
Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot
Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...
1. Agilent 720 ICP, MOF 2014. In very good working condition. Complete set with all necessary accessories like the chiller, Pump and computer software.
Distribution belt / Deserting system For splitting a shingle stream into two processing lines Condition: overhauled, serviced, fully functional, ready for use
High-speed labeller for 2.25 ml Ypsomate Autoinjectors. The machine line consists of an automatic pallet management system for the autoinjectors packed on pallets in trays: a) Integrated Full Tray De-Palletizing with a first FANUC robot, which places the trays on a conveyor belt. On the same machine, the empty pallets are palletized with empty trays by a second FANUC robot. b) Machine where via the conveyor belt, trays transported with autoinjectors arrive at the next FANUC robot. This robot will pick up the autoinjectors in the laying position from the trays and put them upright into the feeder to machine c). The emptied trays will be transported back to machine a), where they will be picked up and put onto an empty pallet. c) Fully autom. rotary labelling machine IMA, type Sensitive Roto 720. Machine with two label dispensers for faster reel change (no downtime). Outp ...
S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago
rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm
Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 72er Year 1998 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Key data: 7 , 230 mm, 160 mm
SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)
Interroll Rising falling Incline belt conveyor with leading belt GF 8168 (7278+890)-690-580 RA2364 Technical data: Conveyor length (NL): 8168 mm ( 7278 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 8168 (7278+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type: ...
SNA-10. 2 Emergency Power Systems - Complete System Manufacturer: Heinkel Aggregatebau GmbH Technical Data: - Heinkel SET HE500/396; 500 kW; 400 V; 722 A; 1500 rpm - IP 20, brushless synchronous machine AEG Rotaduct - 2 units Type DKBH4407/04; 3-phase AC; 280 kW; 400 V/404 A, 50Hz - 1500 rpm; 50Hz; cos φ 0.8; Built: 1991 - Diesel generator by MTU, Diesel tank: 1 unit, capacity: 1425 l - Starter battery; 2 units Hoppeke power HC 125300 - Dry cooler by Alfa Laval; 2 × 6 fans; 793.52 kW; each 50 m³/h - Ventilator: 90460 m³/h; Two-circuit cooler; Rooftop installation Find more here - / Contact us at -
Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T
Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable The scope of delivery includes: 01x Workbench frame, new Material colour: grey Workbench frame legs: Heights adjustable 01x Worktop, new Material: Multiplex Material thickness: 38 mm Overall width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Key data: 6200 mm, 1300 mm, 300 mm
SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit
AVERY DENNISON label maker. ALX 720 print head., Elec: 400 V / 50 Hz , Maximum format (width) mm: Less than 60 mm , Maximum cadence / minutes: ca 60 products / minutes , Pressure: 4-6 bars , Print speed: 2 to 30 m/min , Conveyor dimensions (mm): length: 2000 mm / width: 82 mm
pressure: 320 t chamfer lenght: 7250 mm distance between columns: 6550 mm Control: throat: 400 mm ram - range of adjustment: 270 mm stroke: 270 mm table surface area: 7250x400 mm dayligth: 560 mm fence: 5-1000 ja /nein total power requirement: kW weight of the machine ca.: 53 t dimensions of the machine ca.: m Central crowning Rip fence Mower adjustment Die adjustment Hydraulic ram clamping Hand/foot control The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are ...
A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.
A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible.
A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible.
Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1%, max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging ...
Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...
Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...
turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 900 mm, 720 mm, 1160 mm
Drawer tool cabinet -Tiroclass 8 drawers height 95 mm Dimensions (L x W x H): 900 x 720 x 1160 mm Weight: approx 100 kg
Key data: 90 °, 3000 mm
SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°
Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - / Contact us at -
Key data: 3200 kN, 359 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.
Vacuum Suction Cups Manufacturer Nilfisk Type GB 726 Year of construction unknown Ready to use good condition Power 1900 W
A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible.
1 A&F Butter Pieces Carton Packing Machine Molded Butter Carton Packing machine for 2 pieces of butter By A&F Jagenberg Group Formats: 25p0 g, xxx g Type: 720/2.25.W4 Item no.: 930390 B Built in 1994 With garage content behind the A&F machine
A&F Butter Carton Packer As spare part machine last years of use, Type; 720-2.25.W4 Item no. 930300A Built in 1994 with garage content behind the A&F machine
maximum number of results exceeded
please refine your search
