rapida 72 k used for sale

HORIZONTAL MACHINING CENTER NR. 2 KITAMURA HX500I WITH FATESYSTEM SHUTTLE Features: X-AXIS STROKE: 870 MM Y-AXIS STROKE: 710 MM Z-AXIS STROKE: 660 MM 4TH AXLE (ROTARY TABLE): 0.001-360 ° TABLE: 500 X 500 MM MAX PERMISSIBLE LOAD ON THE BOARD: 800 KG SPINDLE CONE: ISO50 ROTATION SPEED: 12,000 RPM GAMMA CHANGE: 2 GEAR RANGES FAST FEEDS: 50,000 MM/MIN TOOL CHANGE KITAMURA 1:100 SEATS TOOL CHANGE KITAMURA 2:50 SEATS CONTROL: FANUC 16 iM SHUTTLE FASTEM SYSTEM TO 16 STATIONS

; Power [PS]: 179; Gross weight [kg]: 1434; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

; Power [PS]: 163; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

Rotary Press 23 Stations upgraded with a new rejection system C50 V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept IPT Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

; Power [PS]: 544; Gross weight [kg]: 3661; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 598; Gross weight [kg]: 3699; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 5938; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1494

Rotary Press 23 Stations Kilian LX 23 A ST , the machine was recently updated with a rejection system and control unit C50V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept EURO-NORM Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 489; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.

; Power [PS]: 326; Gross weight [kg]: 2110; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 359; Gross weight [kg]: 2261; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 239; Gross weight [kg]: 1533; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

A generally overhauled rotary piston blower brand is offered: RKR/Robuschi Type: K60R. See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you ask, please call.

Used KERN K980 paper-endless cutting machine. The continuous cutter meets all the requirements of computer printout processing at maximum speed. The proof is 34,200 high-quality cuts per hour.

; Gross weight [kg]: 385; Engine: Perkins 404A-22G; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

; Power [PS]: 2039; Gross weight [kg]: 11207; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger

KZE tanks outside marbled 5.610 liter UNI-NIED Measurement and Weight: Total Height: 3550 mm Cyl. Height: 2400 mm Diameter: 1400 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With dished bottom Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With pipe connection with fermentation fitting With clear outlet with butterfly valve DN 50 Lower bottom: With dished bottom With outlet pipe pulled forward with butterfly valve DN 50 With 4 adjustable feet

; Power [PS]: 925; Gross weight [kg]: 5040; Engine: Perkins; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1702

Type ECO II 40/40 SC

Interaxle mowerdeck, RCK 40 LT, 1016 mm, unused, to Kubota T 1460. Other Kubota mowers: Interaxle mowerdeck RC-48-62F, 122 cm, unused Interaxle mowerdeck RC 54-24BEC, 137 cm, little to barely needed Interaxle mowerdeck RC 54-G20G, 137 cm, unused Interaxle mowerdeck RC 54-BG, 137 cm, used Interaxle mowerdeck RC 60-21 BG WG, 150 cm, used Front mowerdeck RC-54-F30 F, 137 cm, used Other front mowers 150 cm suitable for Kubota Mower technique also for Gutbrod, Hako, Iseki, JohnDeere, Kioti, Shibaura etc.

; Power [PS]: 54; Gross weight [kg]: 764; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

Technical characteristics: Rated power: 2000 kVA Primary voltage (HV): 20,000 V Secondary voltage (LV): 400 V Adjustment positions: 1: 21,000 V 2: 20,600 V 3: 20,000 V 4: 19,400 V 5: 19,000 V Frequency: 50 Hz Phases: 3Isolation level: HV: 125 kV / AC 10 LV: AC 10 Cooling: KNAN Service Plan: Ongoing Connections: Connection diagram: Dyn11yn11 Output voltage: 400 V – 50 Hz Multiple Connection (Low Voltage): 1W, 1V, 1U / 2W, 2V, 2U Short-circuit current: 5.83 kA Short-circuit impedance: 6.1% Cooling & dielectric: Dielectric Fluid Type: MIDEL 7131 No-load loss rate: 1873.1 W Load Drop Rate: 15.1 kW Location :p aris Condition: Very good condition – Tested and ready-to-use hardware Disassembly and transport possible on request

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

; Power [PS]: 2719; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

; Power [PS]: 2447; Gross weight [kg]: 12528; Engine: Perkins 4016-61TRG2; Accessories: Battery, Control Panel

; Gross weight [kg]: 7408; Engine: Perkins 4008-TAG2A; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

- Engine power 11kW - Control PLC supported, with two-hand safety circuit - Cutting force 2x20to - Cutting speed approx.33 mm/sec - Cutting channel for rolls to be processed by max. roll length approx. 2500mm max. roll diameter approx. 1400mm - Machine weight approx. 4.5to - Tank capacity approx.160litres - Ambient temperature +5°C - Heat dissipation up to 2 kW - Hand guard grille in the area of the control panel and opposite Machine in stock and immediately available More information and price on request

Uras 3 Head Printer Large Format Printer Printing Machine 3 x 4720/3200i, 2400 dpi  3 heads: 1800mm Thanks to the high-speed printhead with new technology, you can achieve high-performance results at low production costs at a speed of 110 m²/hour in 2Pass printing mode. 3 x 4720/3200i printheads with 2400 dpi high resolution 2-stage ink unit (220 ml ink cartridge and 1.5 l ink tank) Housing-integrated heating & infrared heating & fan system Unwinding spindle to avoid paper bubbles Printing up to 600 meters with tension winding system 2pass (360x1200 dpi) 110 m²/hour Specifications Print head: Piezo print head 3 pieces (3200i/4720)         Media: Width: 1820mm  Thickness: 1mm or less Weight: up to 60kg Maximum printing width: 1800mm Colour unit: 4 x 220 ml cartridge and 1.5 Lt paint tank Print resolution: 2400 dpi Printing Modes: 2 passages (360 x 1200 dpi)  ...

10 units configuration: unit 1 + drying unit + unit 2 + unit 3 + unit 4 + drying unit + unit 5 + unit 6 + coating unit + extended delivery Komorimatic with Technotrans Alpha C, S-APC, PQC, rollers-and blanket wash up device, without impr. cylinder wash up device, Anilox coating unit, extended delivery, ink temperature control, Antistatic device, Special device for printing plastic in feeder, UV rollers, ink agitators, 4 x IST UV interdeck dryer with 1 lamp each, all 4 drying units have 2 interdeck positions each, IST UV end dryer in delivery with 2 lamps

; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.

; Power [PS]: 1496; Gross weight [kg]: 9119; Engine: Perkins 4012-46TWG2A; Accessories: Battery, Control Panel

; Gross weight [kg]: 10388; Engine: Perkins 4012-46TAG2A; Accessories: Battery, Control Panel

; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Gross weight [kg]: 5694; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charge and coolant heater; Water Tank Volume [l]: 1132

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

; Gross weight [kg]: 4202; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)

2PCS x KOHLER ALTERNATOR 7M4054 NEMA CLASS H S/N 2286907 S/N 2287341 230/400 PHASE: 3 KW: 1416 KVA: 1770 AMP: 2555

; Gross weight [kg]: 2068; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 359; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 528

; Gross weight [kg]: 4667; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 3161; Engine: Perkins 2206A-E13TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888