rapida 72 k used for sale

Size: 310 x 430 mm Equipments: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

General Specifications Nominal Force: 16,000 kN (1,600 metric tons) Total Machine Weight: 48,250 kg (48.25 metric tons) Work Space and Stroke Parameters Slide (Ram) Stroke: 180 mm Maximum Distance Between Bed and Slide (Shut Height): 1,160 mm (at bottom dead center) Slide Adjustment: 20 mm Bed (Table) Dimensions: 1,000 mm (width) x 1,250 mm (length) Performance and Electrical Parameters Continuous Stroke Rate: 25 min (25 strokes per minute) Main Drive Motor Power: 61 kW Overall Dimensions Length: 2,275 mm Width: 2,600 mm Height: 5,170 mm This specialized equipment is intended for accurate three-dimensional stamping, mintage, calibrating and extrusion of parts from sheet and graded metal

Capacity: 2500 kg / h, Heating: steam, Cooking time: 120 min

used lifting mixer Kemper F 15 SL, overhauled, for 15 kg flour, 2 digital clocks, stainless steel kettle, stainless steel kneading arm, electrics renewed, repainted, new bearings, new V-belts, factory no. 576558

used spiral mixer Kemper ST 100 A extendable, overhauled, for 100 kg flour, 2 clocks, with 1 stainless steel boiler, if required with 1 additional boiler for an additional 4,000€, stainless steel spiral, electrics renewed, repainted, new bearings, new V-belts, Model-No. 6717788, 25 A, 380 V

2x KARL MAYER R4N 3K 1 x KARL MAYER R4N 4M Find more here - .ucymachines/ Contact us at - sales@ucymachines

Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible.

used spiral mixer Kemper ST 75 A extendable, overhauled, for 75 kg flour, 2 clocks, with 1 stainless steel boiler, if necessary with 1 additional boiler for an additional 3,500€, stainless steel spiral, electrics renewed, repainted, new bearings, new V-belts, Model-No. 6722781, 25 A, 380 V

Centering Machine - KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering Length - Endless -Clamping unit with self-centering vice -Spindle drive 1.8 KW -Drill chuck -Chip tray -Connection cable -Forklift insertion for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg

List of spare parts for Krauss-Maffei MC3 injection moulding machine (KM 1600 T & 2300 T) 1 Calzoni MRE3100I hydraulic laminating motor reconditioned by FHP 1 LCD screen Voith variable flow triple pump : Type IPV /7-250 and Type : IPV7-200 VT 5041 Power Boards 2 VT-VRPA power cards (Orginal Packaging) 1 VT-VRRA power card (Orginal Packaging) 1 keyboard 1 LCD screen 2 GR 400 cards (Orginal Packaging) 2 AE 501 cards(Orginal Packaging) 1 SE 502 card (Orginal Packaging) 1 IO 502 card (Orginal Packaging) 1 NT 500 transformer 3 heating collars 10 KW

Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A 

Manufacturer: Karl Mayer Year of Manufacture: 1984 Model: KS4 FB Type of Machine: Warp Knitting Machine Width: 84 inch Gauge: E24 Yarn Feed: EBC Speed: 1000 rpm Pattern Gearbox: N-Getriebe, GB 1-4 Yarn Monitoring: Laser 4080 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Karl Mayer Year of Manufacture: 1986 Model: KS3 Type of Machine: Warp Knitting Machine Width: 84 inch Gauge: E28 Yarn Feed: FAG, GB1-2-3 Latch Needles: L-28-66/3-49, GB1-2-3 Slider Needle: C-28 Slider: SPEC.51.50.G.104 Sinker: P-28-66-V-3-19 Speed: 1300 rpm Pattern Gearbox: N-Getriebe Loop Forming: GB1-3 Yarn Monitoring: Laser 4080 Extra: With Poleinrichtung, P-28-87-27 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Karl Mayer Year of Manufacture: 1988 Model: KS3 Type of Machine: Warp Knitting Machine Width: 130 inch Gauge: E28 Yarn Feed: FAG, GB1-2-3 Latch Needles: L-28-66H-49 Slider Needle: C-28-87 Slider: SPEC.51.50.G.104 Sinker: P-28-66-VP19 Speed: 1500 rpm Pattern Gearbox: N-Getriebe Loop Forming: GB1-3 Yarn Monitoring: Laser 4080 Fabric Monitoring: Scanner 5090 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Karl Mayer Year of Manufacture: 1997 Model: RSE4 N 3 EBA-1 Type of Machine: Raschel Warp Knitting Machine Width: 130 inch Gauge: E32 Yarn Feed: EBA-1 Weft Yarn Feed: None Knitting Elements: - Slider: C-32-28/P2 - Slider Needle: Spec.38.45 G105 - Latch Needle: L-32-93H-0 - Sinker Comb: S-32-93H-0 - Speed: 1800-2000 rpm - Pattern Gearbox: N-Getriebe - Loop Forming: 2 - Yarn Monitoring: Laser 4080 - Fabric Monitoring: None - Other: Computer Find more here - .ucymachines/ Contact us at - sales@ucymachines

Glass Triblock KOSME Modell Barifill RFC Filling System: Short Tube Filling System with 60 filling valves, 50 rinsing stations and 10head aluminum screw capper Year of manufacturing: 2013 Capacity: 0,33 ltr. glass bottles - 20.000 bph 0,75 ltr. glass bottles - 16.000 bph Pitch: 113 mm Control system: Siemens S 7 The complete line was fully refurbished in December 2025. Available from November 2026

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system  

Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

BIG adapter Kramer large on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

BIG adapter Kramer large on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...

This Palletising line consists of, Box transport belts, KRONES, Type 465, Model Κ465-924, Y.o.M 1999, Maximum width 350mm/ total length 13m/ 6 pieces (2m/piece)/0.75KW- 400V/ control panel, Palletizer, KETTNER, Type BELADER PRESS ON, Model 99/0441/004, Y.o.M 1999, Available control panel (30 pulses/hour in 61.5L box), Empty pallet station with finished pallet exit roller conveyor, KRONES, Type 454, Model LPMT, Y.o.M N/A, Maximum number of empty pallets: 15pcs/ Available control panel/ 100pallets/hour, Strech Wrapping Machine, FRANPACK, Type 101, Model 991553, Y.o.M 1999, Available control panel, Protective barriers with safety switches, Available with the machines, Available: Immediately , Pallet Sizes: 100 x 120 cm , Capacity: 100 pallets per hour , Condition: Good

Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC

Used Blow Molding Machine KOSME KSB 4L up to 6800 bph The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses four  ...

Technical Specifications & Performance Data The Kosme KOSMAC 6T-S2-E1 is a robust rotary labeling solution ideal for beverage production and industrial packaging environments. This second hand labeling machine from 1991 is maintained in excellent condition and ready for operation, offering reliable front-and-back application for multiple bottle formats on a compact footprint that integrates smoothly within a used bottling line. Manufacturer: Kosme Model: KOSMAC 6T-S2-E1 (Kosmac) Year: 1991 Category: Labeling Machine (rotary, wet-glue) Labeling method: Paper/Glue and PP/Glue Label position: Front and Back Number of plates: 6 Number of stations: 1 (configured for dual-label application) Rotation direction: Clockwise Formats processed: 10 (format-dependent output) Adjustments: Manual head adjustment; manual glue film regulation Included accessories: 6 label magazines and 11 glue drums for m ...

Used Capping Machine KTF Electronic Capper model KTP 2-540 This KTF Capping Machine allows to use different cap materials. Adjustable plastics caps with anti filling at pressure This capper allows you to work with different formats of aluminum caps including: 31.5 x 24 – 31.5 x 44 – 35 x 24. KTP model cappers can be supplied as stand-alone units for use with existing filling machines or in monoblock units complete with a filler. KTP Series cappers come with active or passive grippers for screw caps, pressure caps in plastic or pre-threaded aluminium, and for triggers, dosers and pumps. Both gripper types permit automatic positioning, application and head alignment. Specs: Used Capping Machine KTF two heads capper Year: 2013. Speed: 3.000 bph. Direction: clockwise. Caps: – Adjustable plastics with anti-filling pressure. – Metallic 31.5×24 – 31.5×44 – 35×24. It also works a  ...

Used Kronse CSD filling line for Glass 36000 BPHTechnical Specifications & Performance DataThis line is build in 2012, Krones complete line for glass CSD, rated 36,000 bottles/hour in 1.0 L format, with a 70‑valve isobaric filler and 18 capping heads. ready for operation, and shows 759 working hours.Manufacturer: KronesYear of manufacture: 2012Nominal capacity: 36,000 bphProduct type: CSD (carbonated soft drinks)Container type: Glass bottlesBottle neck finish: 28 mmVolume format: 1.0 LRinsing heads/nozzles: 90Filling valves: 70 (isobaric filler for CSD)Capping heads: 18Working hours: 759Electrical ratings: 400/230 V, 50 Hz; up to 46 A on major modulesLine components: Krones Linatronic empty-bottle inspector; rotary rinsing machine (90 nozzles); isobaric filling machine (70 valves, 18 capping heads); Krones Checkmat filled-container inspector; Krones Autocol labeling machine; Krones Var ...

Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...

Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Klöckner Moeller, Transformer type STK 0.75 -Item No.: 175621 -Power: 0.75/1.7 kVA -Voltage: 380V / 230V -Technical data: see photo of the nameplate -Dimensions: 140/155/H150 mm -Weight: 8.3 kg

Description Lot 3 - MOGUL KITCHEN 2 TER BRAAK Cooking Set Up. Including Control Panels, Vacuum Vessel, Cooking Vessel, NEWADE Outfeed Vessel, Pumps. Associated controls, pipework etc

Description Lot 4 - MOGUL KITCHEN 3 TER BRAAK Cooking Set Up. Including Control Panels, Vacuum Vessel, Cooking Vessel, NEWADE Outfeed Vessel (1988), Pumps. Associated controls, pipework etc

Bottle washing machine Klinger Capacity: approx. 3.000 bph Year of manufacturing: 2020 Bottles: up to 1,0 ltr. wide mouth bottles The machine will be heated by steam incl. label removal system Machine condition: like new

LACO 52 Inline Coating System, Supply voltage: 220V, Weight: 84 kg, Coat volume: 3.5 liters, Connection voltage: 220V, mass: 84 kg, Lubrication volume: 3.5 liters

- VIVAS suction alignment belt, - slitter shafts prior to entering buckle station, - exit to left or right by turning the section, Size: Min: 150 x 210 mm / Max: 780 x 1200 mm, Feeder: MBO FP120 pallet feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt, Folding configuration: 4 platebuckles + 2 knives + 1 buckles after the first knife, Number of pages: 16-24 pages for signatures

Robust Kölle Type F50 table router with a Wegoma Vario4 4-roller feed unit for precise routing, profiling, grooving and rebating of solid timber and wood-based materials. The adjustable feed ensures smooth workpiece transport, clean milling results and improved safety at work. Technical data: Spindle diameter: 30 Clamping length: 115 mm Direction of rotation: Left and right Condition: Gebraucht Location: Tauberbischofsheim, Germany

Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: Working width: approx. 1,300 mm Grinding units: 2 Clearance height: max. approx. 150 mm Motor power: 18.5 & 15 kW Condition: Gebraucht Location: Miltenberg, Germany

Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data Manufacturer: M+F KEG-Technik Model: MICROMAT M 1/1-F KeyKeg Year of manufacture: 2011 Machine type: semi-automatic KeyKEG filling machine Capacity: 50-60 KeyKegs per hour Container formats: 20 l and 30 l KeyKEG Fitting type: KeyKEG fitting Connection voltage: 230/400 V, 50 Hz Equipment EC Declaration of Conformity (Machinery Directive 2006/42/EC) Technical documentation Condition Used. The machine has already been disman ...

Maschinenfabrik Ch. Dingler, Zweibrücken, table size approx. 50 x 70 cm, No. 180

Polaris KTAP03 Refrigerated counter with work surface 4 hinged doors Cooling information: Without compressor unit / refrigeration unit Centrally cooled for connection to external refrigeration system Dimensions: HxWxD= 86x295x80cm Please inquire with us about shipping costs. More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Gonella Costruzioni Elettromeccaniche Location: United Kingdom Type: Three-Phase Transformer Sr No: 2033 Power: 1600 kVA Frequency: 50 Hz Year: 1983 High Voltage : 10,000-20,000 ±5%, 92.38 A, 46.19 kV Low Voltage : 400-233.3 V, 2309.99 A Contact us today to get a quote.

Antique Embossing Hot Stamping Press Karl Krause KHP Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Wunderschön verarbeitete antike Kniehebelprägepresse  Beautifully crafted antique Embossing Hot Stamping Press

Three Knife Trimmer Kolbus HD 140.P with Copilot and automatic infeed Dreimeserautoat / Three Knife Trimmer Kolbus HD 140 P Baujahr / Year 2000 - Serial-No. 347 Format / Size max 305 x 420mm Formatbereich beschnitten / Size (trimmed) min. 100 x 100mm - max. 300 x 400mm Buchblock Stärke / Book block thickness min. 2mm - max. 80mm Stapelhöhe / Feeding height 80mm Mechanische Laufleistung / Speed max. 3.900 c/h Rechtseinfuhr / Infeed from right Equipment: Copilot automatic infeed automatical speed Regulation automatic lock of knife adjustment and pressing block automatic setting of bookblock pressure

Kettle / vat for Kemper F 200 ASL Lifting Kneader Machines Bearing renewed / repainted Boiler has a blow / rebalancing Sale thus only as defective