rand maschinen used for sale

Auction-ID: A1-46768-58

Auction-ID: A1-47154-155

Auction-ID: A1-47154-208

Machine type: Screw Compressor (Total Air System) Manufacturer: Ingersoll Rand Model: R5.5ie Execution: Tank-mounted (integrated air receiver) Serial number: 15M-021033 Year: 2016 Working hours: n/a Power: 5.5 kW Voltage: 230 V / 50 Hz Frequency: 50 Hz Flow rate: approx. 0.64 m³/min (64 cfm) Max pressure: approx. 8–10 bar (typical for model) Refrigerant: R134a (integrated dryer) Noise level: < 70 dB(A) Control: Electronic control panel Cooling: Air-cooled Tank: Integrated compressed air receiver Dryer: Integrated refrigeration dryer Remarks: Compact total air system with integrated tank and dryer. Used condition, functional status not tested. Visible signs of normal industrial use. Own mass: approx. 250 kg Dimensions (LxWxH): approx. 1,500 x 700 x 1,400 mm Auction-ID: A7-45993-12

Type: Pneumatic hammers and rotary percussion tools set Quantity: 5 pcs Manufacturers: Atlas Copco / Sullair / Ingersoll-Rand Equipment included: Pneumatic breakers, rotary percussion tools and pneumatic drilling hammers Drive type: Pneumatic Condition: Used condition with visible wear Remarks: Sold as seen in the pictures Auction-ID: A7-45990-72

Equipped with: towbar coupling, jockey wheel, handbrake, pressure valves, lighting Auction-ID: A1-40139-190

Equipped with: Mitsubishi engine, Royson air generator, forklift carriage, 3 plug connections (2x 5pin, 1x three-pole), lifting eye Auction-ID: A1-40139-250

Set of two Ingersoll Rand screw compressors in perfect working order. Very powerful and very well maintained. Auction-ID: A7-47100-10

Milwaukee M18 BOS125-0 18V Li-Ion Battery Random Orbital Sander With the Milwaukee M18 BOS125-0 18V Li-Ion Battery random orbital sander, you have a cordless sander that steers pleasantly when sanding wood, metal, and painted parts. As a cordless random orbital sander, you can give any surface the right approach with six speed settings that suit coarse work and tight finishes. The motor delivers 14000 to 24000 sanding movements per minute so that you can continue faster and still keep control over the end result. Sandpaper is easy to change via the Velcro attachment and with 125mm sanding sole you work neatly along edges and on flat parts. During sanding, the dust box with filter keeps the dust in place better and with the vacuum adapter you can connect directly to Milwaukee vacuum cleaners. REDLINK electronics help with overload protection while REDLITHIUM battery technology is built fo ...

The line is from 2010. Modernization done in 2020. SPECIFICATIONS OF THE ZEMAN CZS LINE ZEMAN's flagship product, the fully automated "PURLIN" line, is used for the production of open cold-formed sections such as C, Z and SIGMA, with different widths and shapes, thanks to the fully automatic adjustment of the profiling rollers. Coils up to 750 wide can be used as raw material mm and sheet thickness 1.25 mm – 3 mm in grade S-390 and lower. The machine is adapted to production of elements up to 15 m in length. Width adjustment of specially hardened profiling rollers It is done steplessly, using only dedicated software. Fully integrated the "flying punching" device makes all kinds of mounting holes, and the whole process is continuous, which means that the material does not stop to perform individual operations such as punching holes or cross-cutting. To main ...

ON 17.12.25, A FULL AUDIT OF THE MACHINE WAS CARRIED OUT BY THE MANUFACTURER'S SERVICE Report available WORKING HOURS: 80H (START-UP ONLY) PRICE OF A NEW MACHINE: 7,500,000 EURO • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 •Year of manufacture: 2020/ first commissioning year 2021 • Last operation: 2022 Specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230 /2.16 > 400 g/10 min • Capacity: Up to 65 kg/h per meter of width • Product weight: 10-80 g/m² • Production speed: 5-80m/min • Nozzle head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Rotary beam heating power: 65-172 kW • Winding station: contact winding machine with automatic coil change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tens ...

Laser Welding Machine – IPG Photonics GENESIS on a marble measuring base Cell Model: SYSLC0000058U Serial Number: PD206000 Power supply: 380-415 VAC Phases: 3P+N+PE Frequency: 50/60Hz Full Load Current: 25 FLA Overcurrent protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Electrical diagram: DOCCHSDMPSXX0225 Production Date: September 2022 2. Laser Source Model: YLR-1500-WC Serial Number: PLMP32200563 Power supply: 200-240 VAC, 1 phase, 50/60 Hz Rated Power: 4500VA Production date: March 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Production date: February 2022 Power supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent protection: 30 A / Type 1 Short-circuit current: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Electrical Diagram: P35-001221 Cooling capacity: 5.5/5.9 kW  ...

Pasta machine WLS, Type Pressquick PQ 6-SU, Capacity approx. 50 kg/h, Capacity of the trough 12 kg, 2.2 kW press cylinder with continuous water cooling., DIOSNA S 120 2G dough kneading machine, 100 drying baskets, JUWEL TS 120 drying cabinet, for pasta 200 - 400 kg in 12-36 hours, 8 drying programs, System was not in operation, Year of manufacture 2021

Bending length: 4100 mm Pressing force: 240 tons Equipped with a set of large number of bending tools Manufacturer: Baykal Model: APHS 41240 Power supply: 3-phase Year: 2021 Serial Number: 28635

Type: PX 30530 Serial Number: 12932 Year: 2021 Bending Length: 3050mm Pressing Force: 320 Tons Maximum pressure: 280 bar Motor power: 18.5KW Oil tank capacity: 400 l Weight: 14,700 kg

Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of manufacture: 2016 Serial Number: HFE-M2-220.4 LK101025 Number of axles: 7 (8 AXESL configuration) Pressing force: 2.200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending Angle Measurement: Digital Angle Sensor Stroke: "Long Stroke" (extended) Connection power: 20 kW Hours worked: 10,238 h Dimensions and weight: Weight: 17.970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: 1 Tool Rack (VA) 2 tables with equipment

Compact manual edge banding machine for processing PVC and ABS edges. Equipped with integrated glue unit and suitable for small workshop or industrial use. Auction-ID: A7-46756-6

Pair of Knoll Maschinenbau VRF MT industrial control/operator panels with membrane keypad and display. Auction-ID: A7-46756-495

Lot of 14 PMA KS 40 digital temperature/process controllers. Labels indicate type 9404 407 40001, power supply 115/230V 48–62Hz 6.5VA, made in Germany Auction-ID: A7-46756-496

FREY MASCHINENBAU Vacuum Filler DVM FROMAGRO Vacuum Extruder Filler PUSHER Vacuum filler Auction-ID: A1-47049-30

Technical details Manufacturer: MAJA-Maschinenfabrik Hermann Schill GmbH & Co. KG Model: SX UNY Type: Industrial skin peeling machine Year: 2002 Machine number: 43676 Voltage: 400 V Frequency: 50 Hz Power: 0.75 kW Current: 2.2 A Configuration: - Conveyor-fed product system - Rotary peeling assembly - Product guiding system - Adjustable mechanical feed lever - Safety cover installed Construction: Stainless steel Application: - Meat skin removal - Fish skin peeling - Food processing operations - Industrial meat and seafood preparation Dimensions: - Length: Approx. 1200 mm - Width: Approx. 800 mm - Height: Approx. 1400 mm Weight: Approx. 180 kg Condition: Used Auction-ID: A7-47053-37

MBK Maschinenbau - MUD-T - (2012) Mixing and dosing machine Auction-ID: A1-47049-176

Technical details Manufacturer: MAJA-Maschinenfabrik Model: Silo ITS 700-31 Machine number: I-39717 Type: Industrial ice flake storage and dispensing system Construction: Stainless steel Configuration: - Insulated ice storage silo/bin - Front dispensing chute - Gravity discharge system - Integrated collection containers Installation: Stationary Application: - Fish processing - Seafood markets - Meat processing - Horeca cold-chain operations - Industrial food production Suitable for: Flake ice or nugget ice storage and controlled dispensing Dimensions: - Length: Approx. 1200 mm - Width: Approx. 1000 mm - Height: Approx. 2200 mm Weight: Approx. 250 kg Condition: Used industrial condition Auction-ID: A7-47053-10

Including vacuum rings Auction-ID: A1-46933-8

With the Electro Maschinen PSEm 2505P, you opt for a very powerful professional table saw with a large reach. You can saw up to 73 millimeters deep at 90° and up to 50 millimeters when you set the blade to 45°. In width, you have a work surface of up to 62 x 46 centimeters, so even the larger workpieces are no problem. The included saw blade has a size of 250x30mm and a very strong motor of 1.8kW, giving it a very strong power. Specifications: Handy, powerful saw table Table top dimensions: 620x456 mm Saw blade: 250x30 mm Motor: 1.8 kW Dimensions: 830x630x350 mm Weight: 35 kg Auction-ID: A1-40890-402