rand maschinen used for sale

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

Condition: tested, fully functional Availability: immediately Width approx.: 350 mm Length approx.: 1570 mm

Various conveyor belts, different lengths and widths, conveying screws, vibration troughs, washing systems,, NIKO trough for flushing, PEACE submachine for apples,, SOLIA G450 large kitchen slicer,, SOEHNLE belt conveyer scale., Destacking for GN shells,, GMS ILPRA - sieve seal for gastro basins,, GÜNTHER Tauchbad,, BAKON glaze application,, Special filling - system for mushrooms,, LOMA metal detector,, NILFISK High-pressure station,, Rotary drum screen for wastewater treatment, WINKLER CORSAR drum dryer,, MAJA ice cream machine,, DIERKS spiral nut, DIOSNA planetary mixer,, NWU Water Cooler,, KAESER compressor,

Press has made 2 686 854 pieces so far, and large factories make well over 10 million pieces with these machines. The maximum theoretical diameter of the piece is 380 mm, production-wise max. 320 - 340 mm finished size. Depth 110mm finished measurement. Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 and 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has decreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks

ITEM NO. AT100FU-EC - Year of construction 2017 - Flow rate 1 000 / 10 000 ltr./h - Speed 900 / 1 429 rpm - Thread DN 40 - 1 year functional warranty

ITEM NO. REFB15-1-CZ - Stainless steel housing - Thread 38Pf - 1 year functional warranty

Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine -with: rail system -12x rails length: 1210 mm -Bevel length: max. 30 mm -max material thickness: 40 mm -with: electronic feed device electronically adjustable -Dimensions box: 1170/780/H510 mm -Weight: 320 kg

Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm -maximum weight allowed: 3 t -Tires: Solid rubber tires 415/100-305 -Overall dimensions: 9135/1860/H1000 mm -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with turntable steering -Platform: 1250/6540/H660 mm -Load capacity: 1.0 t -Tires: Solid rubber 6.00-9 -Number: 3x heavy-duty transport trolleys available Price: per piece -Transport dimensions: 5200/1250/H660 mm -Weight: 420 kg

Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires -Number: 2 heavy-duty transport trolleys available -Price: per piece -Transport dimensions: 11600/2500/H1030 mm -Weight: 3080 kg

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

Description Infeed width 650mm The sheet turner enables the turning of flat sheets with a fold pocket in the running direction. This means that the sheets can be printed or labelled on both sides. The import and outfeed transport rollers are segmented, the speed of the inclined roller table and bag infeed can be controlled separately

Mobile cargo trestle Manufacturer: MSR Maschinen-Stahlbau Reutemann – GmbH Year of Make: 2015 Payload: 8000kg Design: 20,000 load cycles according to EN13155 Load changes performed:

Die Fortuna Automat A3 ist eine automatische Teigteil- und Rundwirkmaschine (hauptsächlich für Brötchen), die für handwerkliche und industrielle Bäckereien bestimmt ist. Sie kombiniert das automatische Teilen des Teigblocks in Portionen mit deren Formung zu gleichmäßigen Kugeln, was die Backwarenproduktion erheblich beschleunigt und die Qualität vereinheitlicht.

Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible.

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Rotary Lobe Blower High Vacuum Blower Unused Manufacturer: Aerzener Maschinenfabrik GmbH Type: GLB 17.14 Year: 1977 Volume flow: 100 m³/min P1: 1.0 atü (bar) P2: 0.5 atm (bar) ΔH: 5 mWS (0.5 bar) at 100 kW and 890 rpm Dimensions approx. 1500 x 1000 x 1100 mm Areas of application: central dust extraction, vacuum coating, packaging industry, chemical processes, steel degassing Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

Equipment: Insulation, Agitator,Manufacturer: Thrun Maschinen- und Behälterbau,Condition: used,Volume: 1,000,Max. permissible Operating temperature : 90,Design: upright,Standing shape: Feet height adjustable,Number of feet: 3,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 990,Diameter outside: 1,120,Cylindrical height: 1,430,Total height: 3,100,Manhole / dome: in the top floor,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Outlet : 65,Remarks: Diameter manhole approx. 420 mm Insulation around the cylinder (small bumps in the

Equipment: Insulation, agitator,Manufacturer: Thrun Maschinen- und Behälterbau,Condition: used,Volume: 113,000,Design: upright,Stand form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: PU foam,Material insulation jacket: stainless steel,Diameter inside: 3,750,Cylindrical height: 11,700,Total height: 13,000,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, spray head, crane eyelets, outlet: available,outlet : 80,last use: foodstuffs,agitator: propeller,bottom bearing: No,power interferer:

A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible.

Crate washer for longitudinal plastic crates with 3 cleaning levels on top of each other and dirt discharge with collection vessel. 1st level: Soaking basin with pump suction channels. 2nd level: Main spraying with upward turner and conveyor. 3rd level: Final spraying with upward turner and conveyor with water collection pool., Additional title: 2500 crates per hour, Capacity: 2500 crates/h, Volume of soaking bath: 2 m3, Power: 24,6 kW, Voltage: 380 V, Frequency: 50 Hz, Length: 6,5 m, Width: 1,4 m, Height: 3,0 m, Weight: 4300 kg, Formats: NRW crates (400x300x290 mm), NRW handy crates (400x300x300 mm), Pinolen crates (395x300x270 mm), Running direction: crates longitudinal, Material: stainless steel cladding, Base construction: standing on 4 feet, Features: 2 x crate turner, soaking basin, main spray jets, second spray jets, dirt expulsion with collection vessel, caustic dosing system

Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 8000 l/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohn ...

Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Palletization including pallet loader and unloader, pallet magazine, banding machine, pallet labeling, Capacity: 150 Pallet/h, Features: Pallet loader and unloader: Nagema PA; Year of construction: 1993; Capacity: 1700 crates/h; Dimensions: Length: 3 m, width: 2 m, height: 3 m Weight: 1.6 tons Banding machine: Athena Roboband 2VH; Year of construction: 2004; Capacity: 150 pallets/h; Pallet dimensions: 1.2 m x 0.8 m; Logopac Logomatic 915/T; Year of construction: 2014; Capacity: 150 pallets/h

Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks., Additional title: vertical, conical stainless steel tanks, Capacity: 3000 l/tank, Width: 1,55 m, Height: 3 m, Weight: 600 kg, Material: V4A stainless steel, Position: vertical, standing on feet, Base construction: cylindrical tanks with dished top and conical bottom, Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Availability: as of now Technical documentation: available Machine dimensions (LxWxH): 1.0 x 1.0 x 1.0 m Weight: approx. 150 kg The full box control was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel.

Offset Pressure Press . Format 44 x 62 cm - Gas device is cleaned and tested

Dispersing system Manufacturer: IKA Maschinenbau Type DISPAX-REACTOR DR 3-13/4 Capacity: max. 20,000 litres/hour Technical specifications : Disperser for continuous operation. The maximum delivery pressure is 2.5 bar. Motor 18.5 kW, 3,000 rpm Mechanical seal is connected to the water. In the dispersion chamber there are three stators and rotors in the coarse-medium-fine gradation as standard. This combination can be varied as desired, both in order and in the degree of fineness.

This is a fully automatic gluing system, solid wood panels, stair treads, window scantlings and beams can be produced. Wood length from 0.60 meters to 3.20 meters, thickness from 1.5 to 10 cm. The facility can be operated by 2 people. Depending on the thickness of the wood, 18 - 30 cbm can be processed. An area of 20 x 45 meters is needed for the plant. After the separation cut, the wood is glued into the width endlessly pressed, then the width and the individual lengths are sawn, rotated 90 degrees and then sanded from below and in the 2nd belt sander from above. The panels are thus ready for oiling or varnishing of your choice. The system only ran for a short time.

x-travel:500 mm y-travel:400 mm z-travel:340 mm work table::800 x 400 mm control:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/min total power requirement:14 kW weight of the machine ca.:2400 kg dimensions of the machine ca.:2100 x 1800 x 2400 mm

Auction-ID: A1-48962-260

Auction-ID: A1-48962-248

Ingersoll Rand R5.5U D-SD Screw Compressor + Ingersoll Rand D72IN-A Refrigerated Air Dryer Description A complete set consisting of a tank-mounted Ingersoll Rand R5.5U D-SD screw compressor and an Ingersoll Rand D72IN-A refrigerated air dryer is offered for sale. The equipment is ideal for metalworking shops, CNC installations, laser or plasma cutting machines and other industrial applications requiring dry, quality compressed air. The system is compact, reliable and ready for continuous industrial use. Compressor technical data Model: R5.5U D-SD Motor power: 5.5 kW Maximum working pressure: 10 bar Power supply: 400 V / 3 phases / 50 Hz Motor speed: 2920 rpm Weight: 232 kg Year of manufacture: 2014 Air dryer technical data Model: D72IN-A Nominal flow rate: 1200 l/min Installed power: 0.27 kW Refrigerant: R134a (0.325 kg) Power supply: 230 V / 50 Hz Maximum pressure: 14 bar Noise level: & ...

Milwaukee M18 BOS125-0 18V Li-Ion Battery Random Orbital Sander With the Milwaukee M18 BOS125-0 18V Li-Ion Battery random orbital sander, you have a cordless sander that steers pleasantly when sanding wood, metal, and painted parts. As a cordless random orbital sander, you can give any surface the right approach with six speed settings that suit coarse work and tight finishes. The motor delivers 14000 to 24000 sanding movements per minute so that you can continue faster and still keep control over the end result. Sandpaper is easy to change via the Velcro attachment and with 125mm sanding sole you work neatly along edges and on flat parts. During sanding, the dust box with filter keeps the dust in place better and with the vacuum adapter you can connect directly to Milwaukee vacuum cleaners. REDLINK electronics help with overload protection while REDLITHIUM battery technology is built fo ...

Working condition air dryer type DX Year of construction 2023 Weight 193kg Dimensions 80x80x128cm Auction-ID: A1-47356-3

The line is from 2010. Modernization done in 2020. SPECIFICATIONS OF THE ZEMAN CZS LINE ZEMAN's flagship product, the fully automated "PURLIN" line, is used for the production of open cold-formed sections such as C, Z and SIGMA, with different widths and shapes, thanks to the fully automatic adjustment of the profiling rollers. Coils up to 750 wide can be used as raw material mm and sheet thickness 1.25 mm – 3 mm in grade S-390 and lower. The machine is adapted to production of elements up to 15 m in length. Width adjustment of specially hardened profiling rollers It is done steplessly, using only dedicated software. Fully integrated the "flying punching" device makes all kinds of mounting holes, and the whole process is continuous, which means that the material does not stop to perform individual operations such as punching holes or cross-cutting. To main ...

ON 17.12.25, A FULL AUDIT OF THE MACHINE WAS CARRIED OUT BY THE MANUFACTURER'S SERVICE Report available WORKING HOURS: 80H (START-UP ONLY) PRICE OF A NEW MACHINE: 7,500,000 EURO • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 •Year of manufacture: 2020/ first commissioning year 2021 • Last operation: 2022 Specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230 /2.16 > 400 g/10 min • Capacity: Up to 65 kg/h per meter of width • Product weight: 10-80 g/m² • Production speed: 5-80m/min • Nozzle head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Rotary beam heating power: 65-172 kW • Winding station: contact winding machine with automatic coil change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tens ...

Laser Welding Machine – IPG Photonics GENESIS on a marble measuring base Cell Model: SYSLC0000058U Serial Number: PD206000 Power supply: 380-415 VAC Phases: 3P+N+PE Frequency: 50/60Hz Full Load Current: 25 FLA Overcurrent protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Electrical diagram: DOCCHSDMPSXX0225 Production Date: September 2022 2. Laser Source Model: YLR-1500-WC Serial Number: PLMP32200563 Power supply: 200-240 VAC, 1 phase, 50/60 Hz Rated Power: 4500VA Production date: March 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Production date: February 2022 Power supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent protection: 30 A / Type 1 Short-circuit current: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Electrical Diagram: P35-001221 Cooling capacity: 5.5/5.9 kW  ...

Auction-ID: A7-48215-62

Lifting capacity = 6 tons Auction-ID: A1-48591-50

Pasta machine WLS, Type Pressquick PQ 6-SU, Capacity approx. 50 kg/h, Capacity of the trough 12 kg, 2.2 kW press cylinder with continuous water cooling., DIOSNA S 120 2G dough kneading machine (has since been sold!), 100 drying baskets, JUWEL TS 120 drying cabinet, for pasta 200 - 400 kg in 12-36 hours, 8 drying programs, System was not in operation, Year of manufacture 2021

Bending length: 4100 mm Pressing force: 240 tons Equipped with a set of large number of bending tools Manufacturer: Baykal Model: APHS 41240 Power supply: 3-phase Year: 2021 Serial Number: 28635

Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of manufacture: 2016 Serial Number: HFE-M2-220.4 LK101025 Number of axles: 7 (8 AXESL configuration) Pressing force: 2.200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending Angle Measurement: Digital Angle Sensor Stroke: "Long Stroke" (extended) Connection power: 20 kW Hours worked: 10,238 h Dimensions and weight: Weight: 17.970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: 1 Tool Rack (VA) 2 tables with equipment