ram used for sale

pressure: 80 t throat: 320 mm stroke: 8-140 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 100 mm table surface area: 900x620 mm ram surface: 600x320 mm hole in the table: 315x180 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 7,3 t dimensions of the machine ca.: BxTxH 1500x2000x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8 t throat: 115 mm stroke: 8-56 mm ram - range of adjustment: 30 mm table surface area: 390x230 mm ram surface: 155x125 mm hole in the table: 105x75 mm table height: 820 mm tool hole in ram: 35 mm weight of the machine ca.: 800 kg dimensions of the machine ca.: 1000x1000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - strip running direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press about 11 ton.; used

pressure: 100 t throat: 350 mm stroke: 20 - 120 mm table size: 1100 x 700 mm ram head dimension: 750 x 450 mm ram adjustment: max. 90 mm no. of strokes: 70 Hub/min strokes - infinitely variable: 20 - 120 Hub/min daylight, max. stroke above - ram adjustment above: 500 mm hole in the table: 400 x 300 mm hole in bolster plate: 220 x 180 mm Breakthrough in column back: 450 x 300 mm total power requirement: 11 kW weight of the machine ca.: 11,8 t dimensions of the machine ca.: 2,1 x 1,3 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bank of 4 x Upstroke Presses With pump unit Consisting of 2x Thompson 120ton Upstroke Press 600mm sq. electrically heated platens 12” diam. ram Digital controllers Solid state relay temperature controllers 1x Thompson 150ton Upstroke Press 600mm sq. electrically heated platens 14” diam. ram Digital controllers Solid state relay temperature controllers 1x Dixon 180ton Upstroke Press 600mm sq. electrically heated platens Ram in excellent condition Cure timers Automatic process controller Solid state relay for heating

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 300 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x600 mm ram surface: 650x260 mm hole in the table: Ø180 mm table height: 920 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: BxTxH 1500x2500x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 250 mm stroke: 8-120 mm no. of strokes: 115 Hub/min ram - range of adjustment: 70 mm table surface area: 650x510 mm ram surface: 400x180 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1500x2500x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 340 mm stroke: 8-140 mm no. of strokes: 50 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x700 mm ram surface: 650x450 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 10,5 t dimensions of the machine ca.: BxTxH 2300x1600x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 270 mm stroke: 4-100 mm no. of strokes: 130 Hub/min ram - range of adjustment: 80 mm table surface area: 670x540 mm ram surface: 460x300 mm hole in the table: Ø 100 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1500x2300x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 300 mm stroke: 8-140 mm no. of strokes: 70 Hub/min ram - range of adjustment: 100 mm table surface area: 750x620 mm ram surface: 500x340 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 2100x1500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 295 mm stroke: 14-150 mm no. of strokes: 34-85 Hub/min ram - range of adjustment: 85 mm table surface area: 900x580 mm table height: 850 mm hole in the table: Ø180 mm ram surface: 560x380 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: BxTxH 1800x1850x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 85 Hub/min ram - range of adjustment: 60 mm table surface area: 820x530 mm ram surface: 260x210 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: mm stroke: 8 - 120 mm no. of strokes: 135 Hub/min max. distance table - ram: 560 mm ram adjustment: 70 mm table surface area: 800 x 600 mm ram surface: 500 x 400 mm total power requirement: 12 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Equipment: CNC control Siemens Sinumerik 840 D Direct measuring system C-axis with extension of the workpiece measurement Hydrostatic guidance of the linear axes Workpiece measurement Tool measurement Tool and process monitoring ARTIS CTM system Workroom surveillance with video camera (at the support) Processing heads with automatic tool clamping UWFK 500 Nm, +/- 90° manually pivotable Various tool holders, type 300.2 Tool magazine 24 to 72 Platu magazine pick-up plate Loading crane for the tool magazine, load capacity 500 kg Loading device with HSK, capto-, KM tool holder Machine protection device Automatic cover of the chip chute Working area protection completely closed Preparation for installing a ...

pressure: 1600 t stroke: 300 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1200 mm ram surface: 1320 x 1180 mm ram strokes: 75 Hub/min Shut Height: 800 mm main drive: 132 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t Slide Knockout - 1st stage: 5 ton - 2, 3, 4 stage:15 ton each - Knockout Stroke: 40 mm Bottom Knockout - 1st & 4th stage: 5 ton - 2nd & 3rd stage: 20 ton - Stroke: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2500 t stroke: 360 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1400 mm ram surface: 1400 x 1400 mm ram strokes: 70 Hub/min Shut Height: 1000 mm main drive: 190 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t 2500 ton Sumitomo hot forging press together with a 150 ton Komatsu OBS press - Model: OBS-150 - Capacity: 150 ton - Stroke: 200 mm - SPM: 256 - 50 - Slide Plate: 700 x 650 mm - Bed: 1250 x 780 mm - Die Height: 420 mm - Adjust: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 060 t throat: 280 mm stroke: 140 mm table-size: 750 x 520 mm Strole of rum/minute: 100 ram adjustable: 55 mm stroke adjustable from - to: 10 - 140 mm mould space: 340 mm hole in the table: 230 x 175 mm table adjustable: 220 mm tool hole in ram: 40 mm total power requirement: 2,95 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,5 x 1,2 x 2,4 m Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Foot switch: adjustable table: Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 245 mm stroke: 14 / 90 mm ram adjustment: 75 mm table height adjustment: 150 mm strokes per minute: 42/85 table surface area: 700 x 490 mm ram surface: 400 x 230 mm tool hole in ram: 40 mm total power requirement: 4 kW weight of the machine ca.: 3,41 t dimensions of the machine ca.: 0,8 x 1,75 x 2,1 m Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 230 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x460 mm ram surface: 340x170 mm hole in the table: 220x130 mm table height: 800 mm tool hole in ram: Ø 35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1800x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 315 mm stroke: 16 - 125 mm max. distance table - ram: 417 mm ram adjustment: 70 mm no. of strokes: 80 Hub/min table surface area: 800 x 630 mm ram surface: 500 x 400 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 1,5 x 2,2 x 2,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 195 x 210 mm ram hole: 40 H7 mm hole in the table: 250 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 10-130 mm no. of strokes: 30-90 Hub/min throat: 330 mm ram - range of adjustment: 100 mm table surface area: 950x660 mm ram surface: 540x440 mm hole in the table: Ø 230 mm table height: 1000 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 8-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 100 mm table surface area: 900x625 mm ram surface: 600x280 mm hole in the table: Ø 150 mm table height: 1000 mm tool hole in ram: Ø 40 mm : 490 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 1800x2200x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

swing diameter: 2400 mm turning height: 2445 mm Control: Siemens 840 D feed range: 0-18000 mm/min table diameter: 2000 mm max. table load: 17000 kg total power requirement: 100 kW weight of the machine ca.: 75 t dimensions of the machine ca.: 10.000 x 5.500 x 7.100 mm Dörries 2, machine number V-800289 with hydraulical chuck, without milling function Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mm Equipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 1600 mm turning height: 1285 mm Control: Siemens 840 D turning speeds: 400 U/min x-travel: +- 950 mm z-travel: 1100 mm workpiece weight: 9000 kg power capacity: 80 kW Torque: 19900 Nm table diameter: 1400 mm weight of the machine ca.: 42 t dimensions of the machine ca.: 7600 x 5200 x 5400 mm Dörries 7, Machine number V-800294 Crossbeam: -Cross beam travel: 600 mm Ram: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mm Equipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions ( x-y/mm) 2500 X 1500 Stroke (mm) 1600 Motor Power (kw) 15 Weight ( ton) 32 Location Turin Italy Ce Marked Year of made 2001 Distance between uprights 2600 mm Max distance between table and ram 2000 - min. 400 mm Front moving plate - Upper ram plate tilting 110° Number of cylinders 2 - Maximum load in the lower table 18000 Kg - Maximum weight on the upper slide/ram 9000 Kg - Approach/return speed 40 mm/s - Working speed 2÷8 mm/s

Description: Balancer diameter: 1100 mm Ram stroke: 130 mm Ram diameter: 60 mm Minimum distance between table and ram: 100 mm Workspace dimensions: 380 x 350 x 230 h mm T-slot: 16 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 650 x 1,650 mm, weight approx.: 310 kg

1250 TON SMS-HASENCLEVER SCREW DOWN HOT FORGING PRESS YEAR NEW . 1983 YEAR REBUILT . 2012 NEW ELECTRIC CONTROLS 2012 MODEL FPRN-315/750/475/1275 RATED FORCE .. 1020 TONS (10000 kN) MAXIMUM FORCE 2040 TONS (20000 kN) STROKES PER MINUTE ... 23 SPM SCREW DIAMETER ... 12.4" (315 MM) STROKE OF RAM 18.7" (475 MM) STROKE ADJUSTMENT PROGRAMMABLE RAM SIZE (L-R) ... 26.4" (670 MM) RAM SIZE (F-B) ... 39.4" (1000 MM) BED SIZE (L-R) ... 27.9" (710 MM) BED SIZE (F-B) ... 39.4" (1000 MM) WIDTH BETWEEN UPRIGHTS ... 29.5" (750 MM) DAYLIGHT . 31.5" TO 50.2" (800 TO 1275 MM) MOTOR 125 HP

CONTROLS   PLC SIEMENS S5 SLIDE   total force (nominal): 160 to   stroke: 60 mm COUNTER RAM   nominal force: 80 to V-RING   nominal force: 80 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 600 mm   shut height max.: 335 mm   ram adjustment: 125 mm   distance between columns (H-frame): 630 mm   passline opening (free passage in side columns): 270 mm CROP SHEAR   cutting force: 150 kN DIMENSIONS / WEIGHTS   total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machi ...

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

pressure:40 t distance between columns:600 mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW 100 % before loading warranty: none used double column drawing press, make FRITZ MUELLER, type S 40.11.1, year of production 1978

:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mm swing diameter:2500|2800|3100|3500 mm turning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mm max. torque on the faceplate:63000 Nm max. workpiece weight:10/16 t table speeds:0,5-80 |0,5-80 |2-63 |2-50 1/min Travel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mm Travel of ram (horiz.):1400|1600|1700|1800 mm rapid traverse X-axis:3 m/min cross section of ram:200x255 mm rapid feed cross beam:350 mm/min power maindrive:55 kW Weight approx.:32/35/37|35/38/40|36/40/42|43/45 t face plate:siehe oben Rams:2 Stk. CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch