We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,277 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
spindle diameter:160 mm x-travel:6000 mm y-travel:5000 mm z-axis:1500 mm dimension of the ram:470 x 500 mm w-axis:900 mm spindle taper ISO:50 spindle turning speed range:1 -3000 U/min spindle motor:71 kW feed speeds:1 - 5000 mm/min rapid speed:25 m/min total power requirement:187,6 kW dimensions of the machine ca.:14,1 x 13,4 x ü.F.7,8 m Machine in mint condition ! with CNC control HEIDENHAIN iTNC 530 autom. toolchanger 80 - pockets CNC Rotary Table 4000 x 4000 mm max. table load 75 to. longitudinal movement V-axis 1500 mm autom. head changer with universal Milling Head universal high speed milling head 5-axis 18000 rpm RENISHAW measuring probe belt filtering unit and through spindle coolant chip conveyor
used
Rammefilter,rustfrit stål,5 rammer i hus,L 780 x B 355 x H 770 mm.
used
Rammefilter,rustfrit stål,5 rammer i hus,L 680 x B 250 x H 770 mm.
used
used
Rammefilter,rustfrit stål,Filtrox type Novox 40/40 max 6 bar
used
Rammefilter 40x40,rustfrit stål,Seitz for vægmontering
used
Mettler-Toledo platform floor scale with ramp, platform dimensions approx. 1230 x 1480 mm (WxD), weighing range up to 600 Kg, d=100 g, overall dimensions including ramp approx. 1700 x 2300 x 130 mm (LxWxH) Includes ICS439a Compact Terminal
used
Mobile front axle ramp, butt, 9m long, 10 tons, front side loading - second-hand - : Price ex location: now only 9.950.-€ instead of 14.500.-€ (net)! Manufacturer: Butt Type: BKV109 Year of construction: 2020 Load capacity 10000 Total length: 9,000mm Total width: 2,800mm Ride width: 2,400mm Height fixed at 1,000mm Axle load: 5.000kg Dead weight approx. 4,000 kg. RAL 7016 Hot-dip galvanized special anti-slip gratings The MOBILE FRONT AXLE RAMP has been adapted for a project and has been given a fixed height (it is not height-adjustable). It is therefore not suitable for loading and unloading standard trucks The support points are adapted to the fixed height and the slope at the place of use (see photos). Condition: very little used – like new! Available: now Location: 24558 Henstedt-Ulzburg
used
ID2752 PVE 5021S with 5t Pilemer hammer year/Year of construction 2002 approx. 7500 hours/hours Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8,9 t, stroke of sliding brace 1500mm, max. hoisting capacity: 6,9 t at 4,6 m – 1,0 t at 11,7 m, Pile winch capacity 6,5 t (adjusted to 9 tons in 2 parts), hammer winch capacity 12,5 t (adjusted to 25 tons in 2 parts), auxiliary winch capacity 4 tons, 6-cylinder Cummins Diesel engine 6CTA8.3C (194 KW) Pile driver with 5 t Pilemer hammer – type DKH5L, good condition, max. vertical pile length 21m (24m with extension), max. pile weight 8.9 t, stroke of the push strut 1500mm, max. lifting capacity: 6.9 t at 4.6 m – 1.0 t at 11.7 m, capacity of the pile winch 6.5 t (adapted to 9 tons in 2 parts), capacity of the hammer winch 12.5 t (adapted to 25 tons ...
used
Mobile overpass with transport trolley 3390-1750 RA1079 The mobile loading bridge consists of a weather-resistant aluminium hollow compartment profile. It has a anti-slip profilesurface. A movable rear-end tongue compensates for different inclines and thus ensures a flat approach angle. On the underside of the crossing bridge there is a rubber profile, which prevents the loading bridge from slipping. Technical data: Manufacturer: unknown Type: Mobile overpass bridge with transport trolley 3390-1750 Year built: unknown Condition: good (used) Total length: 3390 mm Total width: 1750 mm Capacity: 2000 kg Weight: 130 kg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder ...
used
Mobile center axle ramp, Butt, 11,80m long, 9 To., – Used - : Price from location: only 9.500.- € (net), incl. loading! Manafacture: Butt Type: BK912 Year of construction: 2009 Load capacity: 9.000kg Total length: 11,800 mm Total width: 2,300 mm Ride width: 1,960 mm Lip width: 2,140 mm Lip length: 400 mm Straight part platform (top): 2,500 mm Drive-over height: 1,100 - 1,750 mm Optimal movement of the ramp due to centrally arranged floating axle with low manoeuvring requirements Easy adjustment of the operating height via manual hydraulic pump Condition: good – very good Available: now Location: Friedrichshafen
used
Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg
used
Access ramp set -Driveway width: 210 mm -Height: 230 mm -Dimensions: 930/305/H250 mm -Weight: 10 kg
used
Description: defective 2.5 m length Approx. Onsite Dimension. (l x w x h): 2,500 x 400 x 600 mm, weight approx.: 150 kg
used
Description: The set includes 2 ramps They can be used open and folded Open load capacity: 250kg per piece or 500kg per pair Folded load capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 200 x 200 mm, weight approx.: 10 kg
used
Description: The set includes 2 ramps They can be used open and folded Open load capacity: 250kg per piece or 500kg per pair Folded load capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 200 x 200 mm, weight approx.: 10 kg
used
Description: The set includes 2 ramps They can be used open and folded Open load capacity: 250kg per piece or 500kg per pair Folded load capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 200 x 200 mm, weight approx.: 10 kg
used
Description: Mobile ramp for unloading containers or trucks Capacity: 10,000 Kg Width: 2,065mm Length 10,510 Folding end: 2,100 mm Front hydraulic ramp: 740mm Weight  ,2.500 Kg Approx. Onsite Dimension. (l x w x h): 10,500 x 2,100 x 700 mm, weight approx.: 2,500 kg
used
x-axis:16000 mm y-axis:1250 mm z-axis:3200 mm total power requirement:37 kW speeds:2000 U/min Soraluce milling machine FR 16000 Angle head pivotable: 2.5° Drive power: 37 KW The machine was completely overhauled in 2009: new cables, new controls. Can be viewed under power at any time - without machine table, without rotary table, without chip conveyor -- is in good condition (inspection under power is possible)
used
Fresh concrete recycling plant BIBKO RAM 20/ used manufactory: Bibko type: RAM 20 YOM: 2001 Capacity: ca. 12 m³/h system washing trough, trough length 2500 mm separating layer 0,25 mm with discharge conveyor screw (new) overhauled/reconditioned and exactly aligned - gear reconditioned (overhauled) and sealed - all bearings are new - buckets and scraper exactly aligned - 1 pcs feed hopper / used - 1 pcs agitator (wastewater) with console / used - 1 pcs control unit / used -for the full automatic control of the complete plant - 1 pcs gallows-shaped pipe/ used Facility is fully equipped, clean and primed. The final painting according to customer's request. location: South Germany available: march 2024 offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like ...
used
PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, processor -Manufacturer: mushroom, processor -Type: P10 CPU/RAM 304060 -Dimensions: 250/230/H40 mm -Weight: 1.3 kg
used
1 used BIBKO RAM 16, built in 1996. without control and in need of rep., from stock, immediately available, free loading
used
Manufacturer: Homag, Type: CPU Umlade-RAM 512 I/O, Serial number: 2-083-01-5004, Systemconfiguration: PC Steuerung CPU , Year: 1992, Year :1992
used
Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,
used
Manufacturer: Homag CPU SPS-II, Type: 1 MB RAM und PC Cobtroller, Serial number: 2-083-01-5043, Year: 93, Year :93
used
max. wheel diameter:600 mm max. module:10 min. module:2 total power requirement:1,4 kW weight of the machine ca.:0,68 t dimensions of the machine ca.:1,6x0,75 m diameter of hob:15 mm gear width:140 mm
used
Volume flow: 6760m³/h, temperature increase: 128°C, rotational speed: 2670/min, connected load: 88.76kW, length: 2438mm, width: 1922mm, height: 2453mm, weight: 3.8t, including documentation.
used
MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge), ...
used
TECHNICAL SPECIFICATIONS Designation: Concrete ramp Version: mobile, 2-piece Weight: approx. 5 t per block Slope: 15° Transport dimensions per block (length/width/height): 4,470 x 1,200 x 1,000 mm SPECIFIC COMMENT - Mobile ramp system to increase the discharge height - Mudguards at the tips - Metal construction fixed to the blocks for securing
used
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter -Manufacturer: Landis & Staefa -Type: RAM142.0/1982 -Dimensions: 185/95/H80 mm -Weight: 0.3 kg
used
Solid state relays, switchgear, switching components -Manufacturer: Gavazzi -Type: RAM1A69D100 3 pieces mounted on heat sink -Price: complete -Dimensions: 300/200/H80 mm -Weight: 3.3 kg
used
Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30
used
Machining capacity - Maximum workpiece diameter: 6300 mm; - Maximum height of workpiece to be machined: 4600 mm; - Maximum weight of workpiece: 150000 kg; Faceplate - Faceplate diameter: 6000 mm; - Turning speed range: 30 rpm; - Main motor power: 125 kW; - C axis: 0-360°/min.; Cross rail - Cross rail vertical travel: 3500 mm; - Feed of cross rail: 1000 mm/min.; - Motor power: 18.5 kW; Turning and Milling RAM, 1 piece - Vertical RAM travel, Z1 axis: 2400 mm; - Horizontal RAM travel, X1 axis: 7200 mm; - RAM octagonal section: 310x310 mm; - Maximum milling speed: 3000 rpm; - Maximum milling power: 30 kW; - Maximum torque: 800 Nm; - Milling spindle taper: ISO-50 (DIN69871/DIN69872); - X1/ Z1axes rapid feed: 6000 mm/min; Turning RAM, 1 piece - Vertical RAM travel, Z2 axis: 2400 mm; - Horizontal RAM travel, X2 axis: 7200 mm; - RAM octagonal section: 310x310 ...
used
Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ra ...
used
pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:50 mm/s - restoring force of ram:85 to RAM EJECTORS:. - stroke:300 mm - force:14 to DIE CUSHION (TABLE CUSHION):. - force of cushion:20.5 to - stroke:320 mm TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage between side columns (width):1500 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:45 kW - mains voltage:400 V - mains frequency:50 H ...
used
OM Vertical Turnmill TMD-30/40 with 2 x crossrail mounted Vertical rams + C-Axis + Milling spindle New 1990 / Retrofit in 2020 from Fanuc 15T to Siemens 840D Control Siemens 840 D Table diameter 3000 mm Turning diameter 4000 mm Turning height 3000 mm Table load max. 40 ton Distance between table & crossrail max. 3400 mm Ram horizontal travel (X) 2200 mm Ram vertical travel (Z) 2000 mm (right ram),1600 mm (left ram) Crossrail travel 2400 mm Table speed 0.4 ~ 60 rpm Table motor 55 KW Max. torque 10,000 kgM Table index C-Axis 0.001degree Milling spindle speed 3~750 rpm Spindle taper ISO 50 Milling spindle power 18.5 KW Milling feed 1~180 deg/min. Ram section 260 x 260 mm ( right ram ), 250 x 250 mm ( left ram ) Tool shank size 50 x 50 mm Machine dimension (L,W) 14,700 x 10,500 mm Condition said to be very good (please see attached photos). ...
used
Die Spotting press LOIRE SAFE ESSM 200/25, max capacity 2000 Kn, Table 2500x1500 mm, Information about technical data are not binding., Machine available subject to prior sale, Maximum force, adjustable: 200 - 2000 Kn, Maximum daylight between lower table and ram: 2000 mm, Ram stroke: 1600 mm, RAM dimension: 2500x1500 mm, Maximum load in the ram: 9.000 kg, Upper ram plate tilting: 110°, Lower table dimension: 2500x1500 mm, Maximum load in the lower table: 18.000 kg, Front moving plate stroke: 1500 mm, RAM speed approach: 2 - 8 mm/s, RAM speed working: 40 mm/s, Electrical power main group: 15 Kw
used
pressure:315 t distance between columns:1620 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1600 x 1100 mm pressure of drawing cushion in ram:20 t stroke of drawing cushion in ram:100 mm drawing cushion area in ram:300 x 300 mm side window:600 x 1100 mm table height over floor:750 mm ram surface:1600 x 1100 mm oil volume:1500 l power requirement:110,0 kW weight:35,0 t dimensions (WxDxH):4,65 x 2,61 x 5,5 m height over floor:5,05 m height beneath floor:0,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic ram interlocking:pneumatic cutting impact cushioning:hydraulic
used
pressure:500 t distance between columns:3400 mm stroke:850 mm no. of strokes:9 - 18 /min distance table/ram, max. stroke up, adjustment up:2050 mm table surface area:3100 x 1900 mm table height over floor:400 mm side window:1550 mm ram surface:3100 x 1900 mm ram adjustment:350 mm pressure of drawing cushion in ram:70 t pressure of drawing cushion in table:140 t stroke of drawing cushion in table:0 - 250 mm stroke of drawing cushion in ram:150 mm height beneath floor:6,0 m height over floor:8,3 m weight:155,0 t dimensions (WxDxH):5,1 x 4,5 x 12,3 m Kind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x
new
Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...
used
pressure:350 t distance between columns:1350 mm stroke:900 mm distance table/ram, max. stroke up, adjustment up:1300 mm table surface area:1300 x 1000 mm pressure of drawing cushion in table:100 t stroke of drawing cushion in table:380 mm die cushion area:350 x 285 mm capacity of ejector in ram:25 t ejector stroke in ram:200 mm table height over floor:750 mm ram surface:1300 x 1000 mm speed down:500 mm/s speed up:160 - 470 mm/s working speed:16 - 44 mm/s drawing speed:57 - 160 mm/s return capacity:32 t oil volume:1700 l power requirement:91,0 kW Dimensions (WxDxH):3,75 x 2,8 x 7,2 m height over floor:5,28 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary
used
pressure:063 t stroke:70 fix mm no. of strokes:15 - 60 /min distance between columns:1340 mm width between oil collecting pans:1180 mm distance table/ram, max. stroke up, adjustment up:328 mm table surface area:1260 x 700 mm hole in the table:1000 x 100 mm table height over floor:1000 mm column travel -side:470 mm ram surface:1300 x 650 mm ram adjustment:100 mm power requirement:27,5 kW weight:13,7 t Dimensions (WxDxH):3,4 x 2,1 x 3,4 m clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
used
pressure:100 t distance between columns:1230 mm stroke:20 - 200 mm no. of strokes:20 - 60 /min distance table/ram, max. stroke up, adjustment up:650 mm table surface area:1050 x 750 mm table height over floor:760 mm side window:540 mm ram surface:1000 x 750 mm ram adjustment:100 mm power requirement:18,0 kW weight:20,5 t Dimensions (WxDxH):2,8 x 1,9 x 4,3 m infinitely variable drive:PIV clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
used
pressure:500 t distance between columns:2240 mm stroke:1180 mm distance table/ram, max. stroke up, adjustment up:1800 mm table surface area:2050 x 1800 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:380 mm drawing cushion surface in table:1800 x 1200 mm pressure of drawing cushion in ram:122 t stroke of drawing cushion in ram:200 mm drawing cushion area in ram:1800 x 1200 mm ram surface:2215 x 1800 mm table height over floor:500 mm speed down:400 mm/s speed up:10 - 400 mm/s working speed:10 - 100 mm/s depth of the foundation:3,0 m power requirement:122 + 75 + 64,5 kW weight:110,0 t Dimensions (WxDxH):3,6 x 2,2 x 8,5 m height over floor:6,8 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table and ram:hydraulic
used
pressure:500 t distance between columns:3200 mm stroke:1250 mm distance table/ram, max. stroke up, adjustment up:1810 mm table surface area:3000 x 1900 mm pressure of drawing cushion in ram:150 t stroke of drawing cushion in ram:200 mm drawing cushion area in ram:2400 x 1200 mm ram surface:3160 x 1900 mm speed down:400 mm/s speed up:250 mm/s working speed:18 - 58 mm/s height over floor:6,5 m power requirement:90,0 + 36,5 kW weight:110 t German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic
used
pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm pressure of drawing cushion in table:60 t stroke of drawing cushion in table:100 mm drawing cushion surface in table:1300 x 810 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm height beneath floor:0,3 m power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor without drawing cushion:0,3 m height beneath floor with drawing cushion:1,0 m clutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneum ...
used
pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90
used
Pressure:630 t distance between columns:1600 mm stroke:fix 250 mm no. of strokes:20 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1550 x 1200 mm table height over floor:800 mm side window:620 mm ram surface:1360 x 1200 mm ram adjustment:160 mm height over floor:5,9 m height beneath floor:0,6 m power requirement:32,0 kW weight:59,0 t dimensions (WxDxH):3,0 x 2,2 x 6,5 m clutch:pneumatisch overload protection in ram:hydraulisch ram adjustment:motorisch ram counterbalance:pneumatisch
used
Pressure:080 t throat:300 mm stroke:8 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:720 x 600 mm hole in the table:300 x 175 mm table height over floor:860 mm ram surface:400 x 270 mm ram adjustment:60 mm power requirement:7,5 kW weight:6,0 t dimensions (WxDxH):1,3 x 2,2 x 3,05 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic
used
pressure:100 t throat:375 mm stroke:20 - 125 mm no. of strokes:30 - 80 /min distance table/ram, max. stroke up, adjustment up:515 mm table surface area:900 x 635 mm hole in the table:280 mm table height over floor:800 mm passage to the back:570 mm ram surface:700 x 450 mm ram adjustment:80 mm power requirement:15,0 kW weight:8,0 t dimensions (WxDxH):1,5 x 2,4 x 3,5 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic