We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,574 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: HACO, 2 pieces of hydraulic cylinder from press brake type PPES 30135 -Piston rod: Ø 160 mm -Stroke: 130mm -Price/tax: complete -Dimensions: 685/330/300 mm/piece -Weight: 168kg/piece
used
Description: Machine number: 0031288 Operating voltage: 380 V Connection: 5.5 kW Pressing force: 1000 kN Projection: 300 mm Ram strokes: 100/min Adjustable ram: 60 mm Adjustable stroke: 10 - 100 mm Table dimensions: 900 x 590 mm Attention: the clamping tool located on the table top weight approx.: 5,700 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,500 mm
used
VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available
used
pressure: 15 t throat: 180 mm stroke: 6 - 60 mm no. of strokes: 145 Hub/min ram adjustment: 40 mm table surface area: 400 x 270 mm hole in the table: 100 mm ram surface: 120 x 100 mm dayligth: 250 mm total power requirement: 1,1 kW weight of the machine ca.: 1150 kg dimensions of the machine ca.: 0,96 x 1,34 x 1,88 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
faceplate diameter: 2000 mm swing diameter: 2400 mm turning height: 1800 mm x-axis: 2000 mm y-axis: 2000 mm z-axis: 1200 mm ram adjustment: 1200/1500 mm faceplate turning speed range -stepless-: 2,3 - 250 U/min boring spindle drive: 27 kW milling drive motor: 27 kW spindle turning speed - stepless: 0-1200 U/min tool magazin:: 12 fach tool taper: 50 ISO control: Siemens 840 D sl chip conveyor: 2 workpiece weight: 15 t total power requirement: 61/92 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 10 x 10 x 7 m m Machine type: CNC carousel lathe Machining Center - Vertical Rectangular ram head suitable for turning, milling, drilling, drilling and Threading. The machine was overhauled and modernized in 2014 automatic 12-fold tool changer C-axis driven tools • Tappet, hydrostatic bearing completely overhauled • Hyfraukik overhauled • Drives and ball screws renewed • ...
used
Description: Fabrication number: 10566 Compressive force: Norm.25000 kg Ram stroke: H20 - 160 mm Ram adjustment: 120 mm Stroke rate: 40 rpm Working stroke: h 30° vUT 11 mm Working capacity: 2660 mm T Dimensions of the lower worktop: approx. 1100 x 780 mm Dimensions of the upper worktop: approx. 940 x 400 mm weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,200 x 3,000 mm
used
Artec Spider 3D scanner in very good condition with accessories (power supply, USB cable). A license for the Artec-Studio software must be purchased through Artec. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 à 148 mm, Measuring field, hxw greatest possible distance: 536 à 371 mm, Angled measuring field, hÑ b: 30 à 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up ...
used
Description: Largest working pressure: 63 t Cutting surface, ks = 40 kg/mm²: 1600 mm² Projection: 250 mm Stroke of the ram: 20 - 120 mm Ram clearances: 55/min Motor: 3/1500 kW/N Lower tabletop dimensions: approx. 790 x 500 mm Upper tabletop dimensions: approx. 400 x 370 mm weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 2,500 mm
used
Description: Machine number: 978570 Pressure capacity: 45000 kg Projection: 220 mm Ram strokes: 110/min Adjustable ram: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 HP Lower plate dimensions: approx. 690 x 460 mm Upper plate dimensions: approx. 360 x 200 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,200 mm
used
Largest stroke of the plunger: 500 mm ram adjustment: 400 mm Inclined position of the plunger, on both sides up: 20 Grad (°) : 380 mm Maximum distance between table and plunger: 1 280 mm throat: 775 mm height between table -ram: 700 mm table diameter: 700 mm table hole: Ø 130 x 100 mm longitudinal travel: 600 mm cross travel: 600 mm stroke speed: 3 - 80 m/min longitudinal feeds, infinitely variable: 0.01 - 1 mm Smallest increment of the rotary table: 0.01 Grad (°) Rapid traverse speed: 2 000 mm/min. cutting capacity: 2 500 kp total power requirement: 45 kW weight of the machine ca.: 7 t Control: Siemens SINUMERIK 810 N Machine geometrical Digital readout, many accessories! Operating voltage 400 V / 50 Hz Total operating power 45 kW Tank capacity 200 liters Cooling and heating capacity 4.6 / 1.5 kW elivery rate gear pump 20 l/min at 6 bar CBN grinding wheel diameter 45 / 65 / 70 / 75 / ...
used
Drilling and milling machine Skoda HCW2 Machine type: HCW 2-180 5/16m Year of construction: 2009 Manufacturer: Skoda Plzen, CZ Control: CNC840D-Powerline Country of manufacture: Czech Republic Freight basis: from storage location + VAT incl. Dismatling and loading Technical data Control Siemens 840 D Powerline Travel distances X-axis 15,000 mm cross-column Y-axis 5,000 mm headstock vertical Z-axis 1,300 mm support beam (RAM) - horizontal W-axis 1,000 mm quill stroke horizontal Machine table rotary table plate field: Length 3,500mm 3,780mm Width 3,000mm 8,000mm max. table load: 60 t Travel 2500mm (V-axis) Drilling/milling spindle Tool taper: ISO 50 Quill Ø 180 mm RAM cross section 450 x 450 mm Power 100KW max torque 11,000 Nm (up to 85 rpm) max. speed 2500 rpm Rapid traverses: X; Y axis: 15 m/min W; Z - axis: 10 m/min Attachment ...
used
Heavy duty pressbrake gt; 300 ton capacity per 1 meter 6 axes: Y1 / Y2 / X / R / Z / V Upper ram has an extension (horn) of 500 mm gt; total bending length is 4100 mm Akas security laser system CNC bombation Equipped with a V-Matic variable bending die (CNC controlled); V40 up to V160 max Capacity: 500 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2850 mm Max stroke: 400 mm Max distance between table -- ram: 890 mm Depth of throat: 500 mm Table width: 530 mm Locking speed: 90 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 37,5 kW Weight: 42 ton Multi V-shaped clamp: V-matic adjustable (V40 > V160 max)
used
Description: Serial no.: 058-005/9 Nominal force: 160 Np Operating pressure: 144 kg/cm² Plunger stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Downward speed: 200 mm/s Trunnion Ø: 40 mm Installation height: 300 - 800 Upwards speed: 250 mm/s Table size: 900 x 630 mm Plunger surface: 530 x 400 With deep-drawing device under the worktop Additional equipment: 2-hand operation, additional ram 250 x 200 Caution: Stand cracked and secured with frame. Max. pressing force: 160 to, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm
used
18 strokes per min (stroke 40 mm) Capacity: 400 ton Max ram adjustment: 620 mm Working speed: 15 mm/sec Returning speed: 49 mm/sec Max distance between table -- ram: 600 mm Electric motor (power): 100 HP Length: 5000 mm Depth: 2120 mm Height: 2140 mm Weight: 21 ton
used
Description: - Control: conventional - Pressure: 125 t - Throat: 400 mm - Stroke: 6 - 160 mm - Total power requirement: 11 kW - Number of strokes: 60 Strokes/min - Installation height: 525 mm - Ram adjustment: 100 mm - Ram surface: 800 x 550 mm - Table surface: 1100 x 750 mm - Drain opening in Table: 400 mm - Stand passage: 740 weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 3,300 mm
used
Cartoner, make Mohrbach, type MB PCT, year 2015, Possible folding box formats:, 92 82 95mm and 92 82 75mm, Function description, Machine for erecting and gluing boxes of flat blanks, as well as filling the boxes, lid molds and lid closing., The magazine supply for the cardboard blanks is monitored by 2 photocells. One is used to warn, at minimum cutting and the second, the machine switches to malfunction when only a few are left, There are blanks in the magazine., A cardboard blank is removed from the inclined magazine by means of a vacuum feeder, into which, Transport guide rails stored and with feed bars horizontally over the folding tool, transported. Here, the blank passes the glue station, where hot glue is applied to the cardboard blank, is applied., After the blank has been transported over the folding tool, it becomes vertical from the, working push-in ram pushed through the ...
used
HL 200 ton 4 column press Capacity: 200 ton Passage between uprights: 600 & 280 mm Max ram adjustment: 600 mm Distance between table -- ram: 900 mm Table area: 600 x 600 mm Length : 2600 mm Depth : 2220 mm Height: 4250 mm Weight: 6 ton
used
HL 200 ton 4 column press Capacity: 200 ton Passage between uprights: 600 & 280 mm Max ram adjustment: 600 mm Distance between table -- ram: 1100 mm Table area: 600 x 600 mm Length : 2600 mm Depth : 2220 mm Height: 4250 mm Weight: 6 ton
used
throat: 1410 mm workpiece height max.: 1150 mm stroke: 1400 mm table diameter: 1400 mm milling-head swivable +/-: 10 ram - range of adjustment: 750 mm pulling power: 50000 N workpiece weight: 10000 kg Ram stroke speed: 30 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The machine is like new. It has only a few hundred hours of operation. Regularly serviced. A full VAT invoice is issued for the machine. Basic equipment: • • Rigid, closed O-type body guaranteeing accurate tool alignment • • Impact pressure 170 kN • • Fast servo-electric ram drive system • • 2 pcs. manually set sheet clamps with a pneumatic closing system and sheet sensors • • Measuring bar for manual setting clamps • • Closing clamps using a foot switch • • Quick drive system for rotary stations Sheet size X x Y, max. 2.530 mm x 1.270 mm Sheet size X x Y, min. 300 mm x 100 mm Sheet weight max. 1) 200 kg Travel length in the X axis 2.584 mm (X-42…X2542) X-axis travel speed, max. 90 m/min Travel length in the Y axis 1,317 mm (Y-25…Y1292) Travel speed in the Y axis, max. 60 m/min Cross speed, max. 108 m/min Impact speed. 2) Marking 1800 ...
used
Description: Upright width: 930 mm Lateral upright clearance: 700 mm Installation height (top lift):  ,2,400 mm Table surface: 1340x700/930x108 Passage opening in the table: 320x260/600x410 mm Table height above floor: mm Plunger surface: 990 x 930 mm Drive power: 15.0 kW with oilhydraulic drive, hydraulic blank holder / ejector in ram, hydraulic shifting device, ram interlocking control: Siemens S5, Max. pressing force: 65 to, stroke: 1,100 mm, weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 2,600 x 5,200 mm
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800290 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 kW Speed range in 2 gear stag ...
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control system: SIEMENS Sinumerik 840 D Machine number: V-800291 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 40 ...
used
Description: Dörries Single-column Vertical Lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Serial number Control: SIEMENS Sinumerik 840 D Serial number: ,V-800288 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm ...
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter and hydraulic clamping table. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800289 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Cross beam support Travelling distance: ± 1350 mm Crossbeam travel: 1000 mm (100 mm steps) Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 k ...
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control: SIEMENS Sinumerik 840 D Machine number: ,V-800292 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 ...
used
Description: Press line consiting of, 6x MÜLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg  , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manuf ...
used
x-travel:2000 mm y-travel:800 mm z-travel:800 mm table-size:2.000 x 700 mm workpiece weight:3500 kg drive capacity - spindle motor:17 kW spindle cone:50 ISO spindle turning speed range:3000 U/min dimensions of the machine ca.:5265 x 3250 x 2730 m weight of the machine ca.:9 t CNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ...
used
x-travel:2500 mm y-travel:800 mm z-travel:800 mm table-size:2.500 x 700 mm workpiece weight:4000 kg drive capacity - spindle motor:22 kW spindle cone:50 ISO spindle turning speed range:20 - 3000 U/min dimensions of the machine ca.: 7800 x 3315 x 2730 m weight of the machine ca.:11 t CNC controller: Heidenhain TNC 426 :Auto-indexing UDG (2.5º) :HR-410 used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and ...
new
:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mm swing diameter:1250|1600|2000|2300 mm turning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mm table speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/min transmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 t max. torque on the faceplate:20|25|25|25 KN rapid feed of tool post:8000|3000|3000|3000 mm/min feed speeds:0.1 - 500 mm/min Max. cutting force of tool head :18|25|30|30 KNm Travel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mm Travel of ram (horiz.):850|1000|1115|1400 mm Cross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mm power maindrive:22/30|30/37|37/45|37/45 kW weight of the machine ca.:9|12,5|18,5|20,5 t Machine size (LxWxH):2360x2277x3403|26 ...
new
:KDM-K 12| KDM-K 16 | KDM-K 20 | KDM-K 23 | KDM-K 26 faceplate diameter:1000|1400|1800|2000|2300 mm swing diameter:1200|1600|2000|2300|2600 mm turning height:1000|1250|1400|1600|1500 mm table speeds:6,3- 200|5-160 | 3.2-100 | 5-160 | 2,5- 80 m/min transmission ratio:16 max. workpiece weight:3,2|5|8|8|8 t rapid feed of tool post:1800 mm/min feed speeds:0,8-86 mm/min in X-Achse Travel of Ram (vertical):650/700|800/1000|800/1000|800/1000/1300|1000/1380 mm Travel of ram (horiz.):630|915|1115|1250|1500 mm max. vertical adjustment of side-support:900|900|980|980 mm max. horizontal adjustment of side-support:630|630|500|500 mm Cross rail travel :850/1100|890/990/1240/1640|1240/1640 mm power maindrive:22|30|37|37 kW weight of the machine ca.:9|14|18|23|21 t Machine size (LxWxH):2299x2540x3403|2660x26603698|3135x3070x3910|3380x3360x4300|390 0x2950x4400 mm tool holder:5 fach :LED 4 jaw chuck:mit ...
new
:KSM 1200 | KSM 1500 | KSM 1800 | KSM 2000 faceplate diameter:1200 | 1500 | 1800 | 2000 mm grinding diameter:1300 | 1600 | 1900 | 2100 mm distance spindle center to table:225-1000 | 225-1000 | 225-1200 | 225-1200 mm workpiece height max.:800 | 800 | 1000 | 1000 mm Travel of Ram (vertical):800 | 800 | 1000 | 1000 mm table speeds:5-40 | 5-40 | 4-30 | 4-30 m/min workpiece weight max.:4000 | 5500 | 7500 | 9000 kg rapid traverse vertical:500/25-500 (Universal-Spindel) m/min vertical feed on handwheel:0,1/0,5/1 mm/U vertical feed on handwheel:0,001/0,005/0,01 mm/Grad autom. vertical feed:0,001-0,099 mm dimensions of grinding wheel:horizontal: 510 x 203.2 x 75 / 510 x 203.2 x 100 (Option) mm spindle drive:horizontal: 15 (18,5 Option) kW spindle speed:horizontal: 1150 1/min ram swivable +/-:universal: ±75 ° spindle drive:universal: 7,5 (11 Option) kW spindle speed:universal: 1000 - 3000 1/min ...
used
faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:500 mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories
used
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
used
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
used
pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic
used
pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary
used
pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
used
pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
used
pressure at min. stroke:3 t throat:150 mm stroke:- 39 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 380 mm pressure at min. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:790 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,2 t Dimensions (WxDxH):0,5 x 0,9 x 1,4 m
used
pressure at min. stroke:3 t throat:150 mm stroke:- 40 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 250 mm pressure at max. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:810 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,15 t Dimensions (WxDxH):0,7 x 0,8 x 1,4 m
used
Pressure:500 t distance between columns:1550 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1200 x 1300 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:150 mm die cushion area:950 x 950 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:780 mm/s working speed:105 mm/s oil volume:4000 l power requirement:263,0 kW weight:45,0 t Dimensions (WxDxH):3,3 x 3,3 x 6,1 m height over floor:6,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable
used
pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m
used
pressure:160 t distance between columns:1340 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:930 mm side window:600 mm ram surface:1300 x 900 mm speed down:367 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:15,0 t Dimensions (WxDxH):2,5 x 2,2 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary
used
pressure:100 t throat:380 mm stroke:650 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:800 x 700 mm hole in the table:200 mm table height over floor:920 mm ram surface:630 x 600 mm speed down:65 mm/s speed up:375 mm/s working speed:17 mm/s oil volume:350 l power requirement:18,5 kW weight:9,0 t Dimensions (WxDxH):1,5 x 2,5 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20
used
pressure:250 t distance between columns:1125 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1100 x 900 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:100 mm die cushion area:700 x 400 mm table height over floor:960 mm side window:700 mm ram surface:1080 x 900 mm oil volume:1000 l power requirement:35,0 kW weight:23,0 t Dimensions (WxDxH):2,5 x 2,3 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary
used
pressure:160 t distance between columns:880 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:830 x 1000 mm hole in the table:265 x 365 mm table height over floor:850 mm side window:610 mm ram surface:860 x 1000 mm power requirement:55,0 kW weight:14,7 t Dimensions (WxDxH):2,2 x 2,0 x 4,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 depth stop:motoric adjustable table:motoric foundation pit:not necessary
used
pressure:50 t distance between columns:1750 mm stroke:500 mm Distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1700 x 750 mm table height over floor:800 mm side window:650 x 750 mm ram surface:1700 x 750 mm power requirement:11,0 kW weight:11,0 t Dimensions (WxDxH):2,1 x 1,15 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary
used
pressure:030 t stroke:8 - 40 mm no. of strokes:100 - 600 /min distance between columns:325 mm distance table/ram, max. stroke up, adjustment up:250 mm table surface area:540 x 300 / 325 x 395 mm hole in the table:315 x 110 mm table height over floor:1000 mm column travel -side:290 mm ram surface:250 mm material width of feeder:120 mm material thickness of feeder:3,0 mm feed length:60 mm power requirement:5,5 kW weight:2,6 t Dimensions (WxDxH):1,5 x 1,2 x 2,2 m clutch:pneumatic roll feed:mechanical, Bruderer BBV 120/60
used
nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m