ram used for sale

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose, high pressure hose -Manufacturer: Still, high pressure hose -Item number: 0529864 -Dimensions: 610/360/H170 mm -Weight: 1.1kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Manufacturer: Linde, hydraulic line PV/22 TA-No: 1/2193046 -Art.Nr.: 3794401507 -Price: per piece -Number: 2 piece -Dimensions: 640/220/H30 mm -Weight: 0.5 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1290 mm -Weight: 4.9 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1380 mm -Weight: 5.0 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1230AOLSF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1240 mm -Weight: 5.1 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1350AOLSF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1350 mm -Weight: 5.2 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1340SF50VASF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1360 mm -Weight: 5.3 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1080SF50VASF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1100 mm -Weight: 4.5 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx2180AOLAOL45 -Hydraulic hose: HD240T 90 BAR -Price: per piece -Number: 2 pieces -Dimension: Ø 60 x 2020 mm -Weight: 7.1 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Steering cylinder: stroke 198 mm -Piston rod: Ø 40 mm -Recording piston rod: Ø 24 x24 mm / Ø 28 x 22 mm -Dimensions: 715/110/H115 mm -Weight: 12.8 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston rod: approx. Ø 50 mm -Piston rod: Ø 35 mm -Thread on piston rod: 2x M 30 -Stroke: 100 mm -Dimensions: 445/140/H90 mm -Weight: 9.6 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston rod: approx. Ø 80 mm -Piston rod: Ø 50 mm -Piston rod holder: 2x Ø 35 mm -Stroke: 150 mm -Dimensions: 780/205/H135 mm -Weight: 33.6 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston: approx. Ø 50 mm -Piston rod: Ø 36 mm -Thread on piston rod: 2x M 27 -Stroke: 160 mm -Dimensions: 695/140/H120 mm -Weight: 17 kg

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, tie rod cylinder -Stroke: 260 mm -Piston diameter: 80 mm -Piston rod: 18 mm -Total length: 610 mm -Total length extended: 870 mm -Weight: 6.55 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston rod: Ø 40 mm -unused -Dimensions: 670/120/H120 mm -Weight: 11 kg

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Stroke: 83 mm -Piston diameter: mm -Piston rod: 30 mm (connection thread) -Total length: mm -Total length extended: mm -Dimensions: 530/380/H380 mm -Weight: 26 kg

faceplate diameter: 5000 mm swing diameter: 6300 mm turning height: 4030 mm Control: Siemnens type: 840 D power line Shop Turn live tooling: turning speeds: 25-630 U/min Tool changer: 8 Pos. Max ram stroke: 2000 mm ram head dimension: 300x300 mm cross rail - adjustment: 3200 mm turning speeds: 0,4-50 U/min transmission ratio: 2 chip conveyor: coolant: total power requirement: kW weight of the machine ca.: 129 t dimensions of the machine ca.: 14,5x13 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Work piece maximum diameter: 8500 mm; - Distance between columns: 8500 mm; - Work piece maximum diameter through gantry travel: 11000 mm; - Work piece maximum height: 6000 mm; - Work piece maximum weight on faceplate: 100 tons; Table-Faceplate - Diameter: 6000 mm; - Speeds range (continuously variable): 0-50 rpm; - 4 x 40 kW main motor FANUC make: 160 kW; Fixed table - Dimensions: 3x2000x6000 mm; Gantry - Horizontal travel Y axis: 11800 mm; - Feeds range (continuously variable): 10000 mm/min; Cross rail - Vertical travel W axis: 5200 mm; - Feed range (continuously variable): 0 ÷ 250 mm/min; - Feed motor power: 50 kW; Vertical Rail Head (turning and milling operations) - Vertical ram travel (Z axis): 2700 mm; - Rapid feed speed for Z axis: 10000 mm/min; - Ram cross section: 450x450 mm; - Milling motor power: 40 kW; - Millin ...

x: 6000 mm y: 2000 mm z: 1000 mm CNC control unit Heidenhain TNC: 355, Universal ram head, plus second ram head heavy metal machining, Max 3000 cycles, Countertop size 2000x8000mm Internal cooling, SK50 holder.

ram hammer weight: 26 kg ram hammer stroke: 200 mm type: KO : 596 no. of strokes: 220 Hub/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92600 € : 1861.26 € : 160 to : 6 mm : 750 mm : 1100 mm : 230 mm : 1 - 172 mm : 45 1/min : 6 : 100 mm : 80 mm : 375 mm : 540 mm : 11 kW : 1890 mm : 1950 mm : 3650 mm : 15500 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety dev ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 58200 € : 1169.82 € : 80 to : 4 mm : 600 mm : 900 mm : 200 mm : 1 - 110 mm : 60 1/min : 6 : 80 mm : 50 mm : 300 mm : 400 mm : 7.5 kW : 1600 mm : 1500 mm : 2750 mm : 5700 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device ...

: neu : 2024 : 7296 : prompt, Zwischenverkauf v : Türkei : 70300 € : 1413.03 € : 1 : 100 to : 4.5 mm : 700 mm : 1000 mm : 210 mm : 1 - 132 mm : 58 1/min : 6 : 90 mm : 60 mm : 300 mm : 445 mm : 7.5 kW : 1650 mm : 1545 mm : 3011 mm : 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00 ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83200 € : 1672.32 € : 130 to : 4.5 mm : 650 mm : 950 mm : 220 mm : 1 - 132 mm : 50 1/min : 6 : 95 mm : 70 mm : 325 mm : 500 mm : 11 kW : 1800 mm : 1725 mm : 3020 mm : 8000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety devi ...

pressure: 63 t throat: 315 mm stroke: 8 - 120 mm table surface area: 630 x 800 mm dayligth: 560 mm ram adjustment: 70 mm no. of strokes: 56/90 Hub/min ram surface: 400 x 500 mm total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,5 x 2,2 x 2,75 m The following work is/was carried out on the machine. partial overhaul: - Machine is completely disassembled, checked - Machine is repainted - new press safety valve - New separate control cabinet with touch panel and ABB safety control - new shaft bearing - A current UVV test and braking time measurement is carried out before delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 290 mm stroke: 12 - 100 mm ram adjustment: 80 mm no. of strokes: 140 Hub/min table surface area: 830 x 560 mm ram surface: 630 x 300 mm total power requirement: kW weight of the machine ca.: 6,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portal Milling Machine with travelling table type FLP-3100: -Table dimension: 3100x10700 mm; -Longitudinal travel, X axis: 11000 mm; -RAM travel on crossrail, Y axis: 3600 mm; -RAM vertical travel, Z axis: 1000 mm; -Crossrail travel on columns, W axis: 3000 mm; -Main spindle motor power: 60 kW; -Main spindle maximum speed: 800 rpm; -Main spindle taper: ISO-50 (DIN69871); -Distance between columns: 3600 mm -CNC: Fanuc; -Heidenhain linear measuring system.

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: Safan, 2 hydraulic cylinders from press brake type UC 110-3100 -Piston rod: Ø 150 mm -Stroke: 180mm -Piston: with return spring -Add-on parts/directional valves: see photos -Price/tax: complete -Dimensions: 640/225/220 mm/piece -Weight: 270kg/piece

pressure: 600 t stroke: 300 mm no. of strokes: 20 - 35 Hub/min hole in the table: 1500 x 600 mm table-size: 3000 x 1400 mm ram adjustment: 0 - 120 mm number of connecting rods: 2 Stück table surface area: 3000 x 1400 mm dimension of ram: 3000 x 1300 mm control: Simpac total power requirement: 36 KVA weight of the machine ca.: 105 t required space: 10 x 2 x 5 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 235 mm stroke: ca. 400 mm stroke speed - idle stroke downwards: 4,5 m/min stroke speed - idle stroke upwards: 10 m/min dayligth: ca. 500/600 mm table-size: ca. 450 x 400 mm ram hole: 32 mm total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 0,95 x 0,45 x 2,1 m Condition: ready for operation: Condition: geometric overhauled: Video available on our website.: Electric 380 Volt: With elect. two-hand control through: separate console: Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! The stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with Mo ...

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

LEFORT CONQUEROR 600 T, crushing system, Cutting force: 600 t, Hold down force: 120 t, Box closing force: 2 x 240 t, Pusher ram force: 120 t, Open box dimensions: 6000x2450, Closed box dimensions: 800 x 600 mm, Baler size: 800 x 600 mm, Weight: 49 t, MOTORIZATION, Engine: ……………………………………………………………� ��……………………Cat, Type: diesel, Engine power: 278 HP, Year of construction: 2008, operating hours 18,000 h, Hydraulic oil tank: 2000 l, Fuel tank capacity: 1200 l, Cabin: yes, Remote control: yes, Machine is refurbished and ready for immediate use., Location: UK, Cutting force: 600 t, Hold down force: 120 t, Box closing force: 2 x 240 t, Pusher ram force: 120 t, Open box dimensions: 6000x2450, Closed box dimensions: 800 x 600 mm, Baller size: 800 x 600 mm, Weight: 49 t, Engine: Cat, Type: diesel, Engine power: 278 HP, Year of constructio ...

Force T 45 DELEM DA 65 control Useful bending length 2200 mm Distance between the uprights 1550 mm Depth of the recess 350 mm Max distance between table and ram Mm 380 Max stroke of the ram Mm 180 Approach speed Mm / s 200 Working speed Mm / s 10 Return speed Mm / s 180 Travel register X Mm 500 Register stroke R1 Mm 150 Main motor power Kw 7.5 Max working pressure BAR 230 Pump flow rate l / min 24

WEINGARTEN ER 100 Eccentric press Capacity 100 t Table 710 x 570 mm Sheet thickness 12 mm Number of strokes 55 spm Ram stroke 8-112 Ram adjustment 80 mm

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: HACO, 2 pieces of hydraulic cylinder from press brake type PPES 30135 -Piston rod: Ø 160 mm -Stroke: 130mm -Price/tax: complete -Dimensions: 685/330/300 mm/piece -Weight: 168kg/piece

Description: Machine number: 0031288 Operating voltage: 380 V Connection: 5.5 kW Pressing force: 1000 kN Projection: 300 mm Ram strokes: 100/min Adjustable ram: 60 mm Adjustable stroke: 10 - 100 mm Table dimensions: 900 x 590 mm Attention: the clamping tool located on the table top weight approx.: 5,700 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,500 mm

VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available

Description: Machine number 8758 , Ram adjustment 85 mm , Ram strokes 60/min Voltage 380 V Max. pressing force: 100 to, stroke: 20 bis 110 mm, table surface area l x w : 900x700 mm, total power requirement: 7,5 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,500 x 2,800 mm

Description: Machine number 6360290 Ram strokes 120/min Ram adjustment 55 mm Max. pressing force: 45 to, stroke: 4 bis 80 mm, throat: 230 mm, table surface area l x w : 690x460 mm, total power requirement: 3 kW, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 200 mm

pressure: 15 t throat: 180 mm stroke: 6 - 60 mm no. of strokes: 145 Hub/min ram adjustment: 40 mm table surface area: 400 x 270 mm hole in the table: 100 mm ram surface: 120 x 100 mm dayligth: 250 mm total power requirement: 1,1 kW weight of the machine ca.: 1150 kg dimensions of the machine ca.: 0,96 x 1,34 x 1,88 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2000 mm swing diameter: 2400 mm turning height: 1800 mm x-axis: 2000 mm y-axis: 2000 mm z-axis: 1200 mm ram adjustment: 1200/1500 mm faceplate turning speed range -stepless-: 2,3 - 250 U/min boring spindle drive: 27 kW milling drive motor: 27 kW spindle turning speed - stepless: 0-1200 U/min tool magazin:: 12 fach tool taper: 50 ISO control: Siemens 840 D sl chip conveyor: 2 workpiece weight: 15 t total power requirement: 61/92 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 10 x 10 x 7 m m Machine type: CNC carousel lathe Machining Center - Vertical Rectangular ram head suitable for turning, milling, drilling, drilling and Threading. The machine was overhauled and modernized in 2014 automatic 12-fold tool changer C-axis driven tools • Tappet, hydrostatic bearing completely overhauled • Hyfraukik overhauled • Drives and ball screws renewed •  ...

Description: Fabrication number: 10566 Compressive force: Norm.25000 kg Ram stroke: H20 - 160 mm Ram adjustment: 120 mm Stroke rate: 40 rpm Working stroke: h 30° vUT 11 mm Working capacity: 2660 mm T Dimensions of the lower worktop: approx. 1100 x 780 mm Dimensions of the upper worktop: approx. 940 x 400 mm weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,200 x 3,000 mm

Artec Spider 3D scanner in very good condition with accessories (power supply, USB cable). A license for the Artec-Studio software must be purchased through Artec. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up  ...

Description: Largest working pressure: 63 t Cutting surface, ks = 40 kg/mm²: 1600 mm² Projection: 250 mm Stroke of the ram: 20 - 120 mm Ram clearances: 55/min Motor: 3/1500 kW/N Lower tabletop dimensions: approx. 790 x 500 mm Upper tabletop dimensions: approx. 400 x 370 mm weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 2,500 mm

Description: Machine number: 978570 Pressure capacity: 45000 kg Projection: 220 mm Ram strokes: 110/min Adjustable ram: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 HP Lower plate dimensions: approx. 690 x 460 mm Upper plate dimensions: approx. 360 x 200 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,200 mm

Largest stroke of the plunger: 500 mm ram adjustment: 400 mm Inclined position of the plunger, on both sides up: 20 Grad (°) : 380 mm Maximum distance between table and plunger: 1 280 mm throat: 775 mm height between table -ram: 700 mm table diameter: 700 mm table hole: Ø 130 x 100 mm longitudinal travel: 600 mm cross travel: 600 mm stroke speed: 3 - 80 m/min longitudinal feeds, infinitely variable: 0.01 - 1 mm Smallest increment of the rotary table: 0.01 Grad (°) Rapid traverse speed: 2 000 mm/min. cutting capacity: 2 500 kp total power requirement: 45 kW weight of the machine ca.: 7 t Control: Siemens SINUMERIK 810 N Machine geometrical Digital readout, many accessories! Operating voltage 400 V / 50 Hz Total operating power 45 kW Tank capacity 200 liters Cooling and heating capacity 4.6 / 1.5 kW elivery rate gear pump 20 l/min at 6 bar CBN grinding wheel diameter 45 / 65 / 70 / 75 / ...

Drilling and milling machine Skoda HCW2 Machine type: HCW 2-180 5/16m Year of construction: 2009 Manufacturer: Skoda Plzen, CZ Control: CNC840D-Powerline Country of manufacture: Czech Republic Freight basis: from storage location + VAT incl. Dismatling and loading Technical data Control Siemens 840 D Powerline Travel distances X-axis 15,000 mm cross-column Y-axis 5,000 mm headstock vertical Z-axis 1,300 mm support beam (RAM) - horizontal W-axis 1,000 mm quill stroke horizontal Machine table rotary table plate field: Length 3,500mm 3,780mm Width 3,000mm 8,000mm max. table load: 60 t Travel 2500mm (V-axis) Drilling/milling spindle Tool taper: ISO 50 Quill Ø 180 mm RAM cross section 450 x 450 mm Power 100KW max torque 11,000 Nm (up to 85 rpm) max. speed 2500 rpm Rapid traverses: X; Y axis: 15 m/min W; Z - axis: 10 m/min Attachment ...

Heavy duty pressbrake gt; 300 ton capacity per 1 meter 6 axes: Y1 / Y2 / X / R / Z / V Upper ram has an extension (horn) of 500 mm gt; total bending length is 4100 mm Akas security laser system CNC bombation Equipped with a V-Matic variable bending die (CNC controlled); V40 up to V160 max Capacity: 500 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2850 mm Max stroke: 400 mm Max distance between table -- ram: 890 mm Depth of throat: 500 mm Table width: 530 mm Locking speed: 90 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 37,5 kW Weight: 42 ton Multi V-shaped clamp: V-matic adjustable (V40 > V160 max)

Description: Serial no.: 058-005/9 Nominal force: 160 Np Operating pressure: 144 kg/cm² Plunger stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Downward speed: 200 mm/s Trunnion Ø: 40 mm Installation height: 300 - 800 Upwards speed: 250 mm/s Table size: 900 x 630 mm Plunger surface: 530 x 400 With deep-drawing device under the worktop Additional equipment: 2-hand operation, additional ram 250 x 200 Caution: Stand cracked and secured with frame. Max. pressing force: 160 to, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm