We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,251 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pressure capacity: 85t/850kN, ram stroke: 30-110mm, ram adjustability: 50mm. Documentation available.
used
Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling.
used
spindle diameter: 180 mm x-travel: 8800 mm y-travel: 3500 mm Control: Siemens type: 840 C ram: horizontal adjustment: 970 mm spindle travel: 1200 mm dimension of the ram: 400x400 mm Plate area: 6000x4000 mm rotary table:: Table load: 25000 kg table travel: 1500 mm angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 135 t throat: 400 mm stroke: 20- 120 mm table-size: 1000 x 800 mm no. of strokes: 50 Hub/min ram adjustment: 85 mm hole in the table: 320 x 190 mm ram hole: 45 mm total power requirement: 8,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Type: PL.15.20.4 (presse à planer) with movable cylinder Horizontal movement of portal: 3100 mm Movement of cylinder (left to right): 1800 mm Capacity: 150 ton Max ram adjustment: 400 mm Drawningspeed: 45 mm/sec Workingspeed: 4,8 mm/sec Returningspeed: 69 mm/sec Passage between uprights: 2000 mm Max distance between table - ram: 800 mm Dimensions of the table: 4000 x 2000 mm Tableheight fixed - sliding: 800 mm Electric motor (power): 7,5 HP Length: 4800 mm Depth: 3930 mm Height: 3450 mm Weight: 19,5 ton
used
pressure: 150 t throat: 550 mm stroke: 10 - 140 mm table surface area: 1180 x 980 mm no. of strokes: 40 Hub/min dayligth: 500 mm ram surface: 1040 x 800 mm ram adjustment: 70 - 150 mm tool shank hole (depth x diameter): 435 x 55 mm required power: 15 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table-size: 520 x 400 mm no. of strokes: 160 Hub/min work capacity during endurance run: 1370 Nm force: 2740 Einzelhub adjustment of stroke: 4 - 80 mm ram adjustment: 40 mm ram surface: 160 x 160 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm hole in the table: 80 mm weight of the machine ca.: 1,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 t throat: 400 mm stroke: 20 - 160 mm table surface area: 1200 x 800 mm ram adjustment: 100 mm no. of strokes: 60 Hub/min ram surface: 860 x 520 mm total power requirement: 15 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 1,7 x 2,5 x 3,23 m The machine should b partially overhauled new painting new seals The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 t dayligth: 600 mm stroke: 25 - 150 mm table surface area: 1500 x 900 mm ram surface: 1500 x 900 mm ram adjustment: 100 mm daylight between the columns: 1500 mm daylight between the side columns: 400 x 200 mm distance between columns: 1680 mm weight of the machine ca.: 15 t dimensions of the machine ca.: 2,7 x 1,8 x 4,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 40 t dayligth: 250 mm stroke: 8 - 50 mm table clamping surface LxW: 620 x 450 mm table height over floor: 980 mm no. of strokes: 85 - 500 Hub/min distance between columns: 680 mm ram - range of adjustment: 50 mm number of T-slots: 4 ram surface: mm total power requirement: 8 kW dimensions of the machine ca.: 2,3 x 2,2 x 2,8 m weight of the machine ca.: 5,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 200 t throat: - mm stroke: 250 mm Table dimensions: 2420 x 840 mm ram surface: 1850 x 650 mm dayligth: 500 mm ram adjustment: 110 mm distance between columns: 1900 mm table height: 170 mm no. of strokes: 25 - 45 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 2550 x 2370 x 3820 mm weight: 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for ...
used
Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
used
PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons
used
pressure: 63 t stroke: 10-80 mm no. of strokes: 65-400 Hub/min ram - range of adjustment: 80 mm table surface area: 1030x550 mm ram surface: 920x450 mm hole in the table: 700x200 mm : 420 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 25 t throat: 220 mm stroke: 8-80 mm dayligth: 355 mm no. of strokes: 140 Hub/min ram adjustment: 50 mm ram surface: 220x180 mm table surface area: 160 mm hole in the table: 90 mm total power requirement: 7,5 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t throat: 280 mm stroke: 160 mm table surface area: 560 x 500 mm ram surface: 280 x 280 mm dayligth: 400 mm oil volume: ca. 360 l total power requirement: 22 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 t throat: 320 mm stroke: 160 mm table surface area: 850 x 550 mm dayligth: 500 mm oil volume: ca. 500 l ram surface: 560 x 450 mm total power requirement: 30 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,5 x 2,0 x 3,0 m Machine was overhauled in 2008 - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 30 HP/kW Positions ATC: 0 Positions APC: 0 SPECIFICATIES Besturing Conventionel Max. Draai diameter Ø 1600 mm Klauw plaat / tafel diameter Ø 1400 mm Max. Draai hoogte 1000 mm Werkstuk gewicht 8000 Kg Horizontale verplaatsing support 700 mm Slag van ram links / support links 850 mm hoek verstelling ram draaibaar ˚graden 35 Gr Toeren - Snelheden - Stappen 18 steps 5 - 250 Rpm Vermogen Kw 30 Kw
used
Table diameter: 550 mm Turning diameter: 550 mm Turning height: 400 mm Motor power: 60 HP/kW Positions ATC: 12 Positions APC: 0 CNC Brand: Siemens CNC Model: 840 D SPECIFICATIONS Controll Siemens 840 D Max. turning diamter Ø 550 mm Table / chuck size Ø 550 mm Workpiece height 400 mm Horizontal movement support / ram 1785 mm Stroke support left ram 50 mm ATC tool changer Sauter 12 Positions Live tooling 12 positions Spindle speeds / ranges 3500 Rpm Power 60 Kw DIMENSIONS Length 6000 mm Width 3250 mm Height 3400 mm
used
Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 8,0 mm Positions ATC: 0 Make Eckold KF 665 Type KF 665 Year 90 er Kraftformer Forming = 8 mm Ram = 0 - 80 mm Speed = 150 / 300 / 600- Model with Potentiometer; limits reverse motion time - Foot switch for motorised adjustment ram - 1 machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening
used
Capacity: 250 t Distance between uprights: 4500 mm Stroke: 0 mm Day light: 0 mm Make Bakker 250 Ton Type YARD 250 Year 70 er Force = 250.000 Kn Outside diameter max. (mm)Column = 4.500 Inside diameter max. (mm)Height = 2.480 Max. pipe length (mm)U ram = 1.770 Max. angle Ram = 285 Wall Thickness (mm)Large set tools
used
Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons
used
pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MAIN TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.300 2. Min. machining diameter mm 200 3. Max. height of the part to be machined mm 2.000 4. Max. load on the table to 18 5. Table diameter mm 3.000 6. Table speed range rpm 1 ÷ 100 7. Main AC motor kW 100 8. Vertical stroke of the cross rail mm 1.500 9. Cross rail feed mm/min 400 10. Driving motors kW 7.5 11. Ram vertical stroke (Z axis) mm 1.250 12. Ram cross section mm x mm 225x225 13. Horizontal stroke (X axe) mm 1.850 14. Feed range (X and Z axis) mm/min 1 ÷ 6000 15. Rapid traverse (X and Z axis) mm/min 10.000 16. Feed motors torque (X and Z axes) Nm 22 CNC Equipment 1. Equipment type Fanuc 18iTb Overall Dimensions 1. Floor space m 7.1x 6 2. Max. height m 6.3 3. Machine weight (excluding special accessories) to 54
used
Vertical slotting machine make BEHR type ST 150Machine -No: 096, built in 1955Technical specifications:large stroke: 150/175 mmSlide adjustment: 150 mmInclination of the ram in both directions: 5/8 degreeProjection: 450 mmHeight of table / UK ram guide: 260 mmRound table diameter: 340 mmLongitudinal displacement of the table: 320 mm3 lifting speeds: 17/54/108 H / min.large groove width: 16/26 mmWeight approx: 1000 kgExternal dimensions approx .: 960 x 1530 x 2030 mmWith- Feeds in X and Y (forwards and backwards) Adjustable speed- Adjustment of the rotary table manually- without the chuckused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Walde ...
used
Hydraulic Double Column Press Fabr. SCHÖN Type TES 16 tMachine -No: 1838 built in 1977Pressure force: 16 tClamping area: 440 x 320 mmgr. distance clamping surface - ram: 280 mmgr. ram stroke: 100 mmDrive power: 5.5 hpOutside dimensions: 1000 x 1000 x 2000 mmWeight approx .: 1000 kgWith- Sick photoelectric barrierUsed, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
pressure: 60 t throat: 330 mm stroke: 500 mm table surface area: 640x640 mm ram surface: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Darragon 15 ton Capacity: 15 ton Passage between uprights: 340 mm Max ram adjustment: 200 mm Distance between table -- ram: 250 mm Dia table hole: 340 x 340 mm Length : 850 mm Depth : 800 mm Height: 1500 mm
new
: gebraucht / neuwertiger Z : 2019 : 7191 : prompt, Zwischenverkauf v : Italien : 43200 € : 1 : 50 to : 800 mm : 450 mm : 11 - 110 mm : 60 - 100 1/min : 8 : 70 mm : 235 mm : 5,5 kW : 1330 mm : 1000 mm : 2650 mm : 5000 kg with 8-fold ram guide fixed table semi-automatic stroke adjustment motorized ram adjustment Variable speed motor hydraulic overload protection dynamic braking platen automatic circulation lubrication safety light guard Keyence Antivibrationspads PEDAL COVER PLATE FOR HOLE IN THE TABLE user manual in GERMAN or ENGLISH Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms v ...
used
pressure: 80 t throat: - mm stroke: 8 - 112 mm table surface area: 830 x 550 mm no. of strokes: 30 - 85 Hub/min ram surface: 630 x 400 mm ram adjustment: 71 mm clamping plate: 990 x 550 mm table height over floor: 810 mm total power requirement: 10 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm Selling price applies without inspection and without a test run. The machine should be partially overhauled in our house (at an additional cost) - Complete disassembly and review - livery - new control cabinet with PLC and touchscreen including cabling. Price of the machine in partially overhauled condition: € 44,000.00 Delivery time for the partially overhauled machines: by agreement The data for this ad was created with ModulMWS - the ...
used
Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg
used
Gantry type CNC Vertical Machining Center Maker : Dorries Scharmann New : 1993 /2009 CNC retrofitted Model : 100FZG 600/700 CNC Control : Siemens 840D Table size : 6000 x 21000 mm Workpiece length : 22000 mm width : 7000 mm Height : 6000 mm Milling ram stroke : 2000 mm Milling spindle motor : 140 kw Rotating speed : 20 ~2000 rpm Milling ram section : 550 x 460 mm With ATC, 8 AAC as 3 Angle attach, Universal attach, 3 special attach.
used
Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel
used
CNC Gantry Type Milling Machine for extra large workpieces. Manufacturer Waldrich Coburg. Model S 22-10 GM 500 NC/16 m. Year 1989. Overhauled/Modernised/Retrofitted 2008. Control Siemens 840D control retrofitted. Table size 15000 x 5000 mm. Table load max. 15000 kg/m². Distance between the columns: With column covers 5800 mm. Without column covers 6000 mm. Distance spindle to table max. 5000 mm. Travels: Gantry longitudinal travel X 16000 mm. Saddle cross travel Y 6800 mm. Milling ram vertical travel Z 2000 mm. Crossrail vertical travel W 3400 mm. Milling spindle Ø front 200 mm. Spindle motor rating 150 KW. Spindle speed range 6 - 750 rpm. Gear steps 2. Torque max. 12900 Nm. Spindle taper ISO 60. Ram section 630 x 680 mm. Proposal Number V(F)-6720
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3212-N Estun E21 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3700 mm - Width: 1800 mm - Height: 2450 mm - Weight: 7000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action c ...
used
Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used
used
Single Stand - Eccentric Press WEINGARTEN Type ERV 40 Masch. No. 537 / 65 Year of construction 1965 Compressive force 40 ton. Projection 230 mm Table size 570 x 470 mm Ram surface 250 x 200 mm Clamping pin bore 40 mm Installation height max. approx. 520 mm Stroke adjustment 8 - 88 mm Ram travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - Clutch-brake combination by WEINGARTEN Friction threaded coupling - electric 2-hand operation and foot switch - Central lubrication via hand pump Space requirement L x W x H 1600 x 1150 x 2300 mm Weight approx. 2.6 ton.; used
used
Single stand - hydraulic press SCHULZ type SES 250 Masch.Nr. 04.86.3511/3 Year of construction 1986 Compressive force 25 ton. Retraction force 10 to radius 360 mm Table surface 600 x 720 mm Ram surface 500 x 500 mm Diarrhoea opening in the table 100 mm Clamping pin hole 40 mm Ram stroke 400 mm Installation height max. 600 mm Table height above corridor 935 / 775 mm Tank capacity Hydraulic 380 litres Drive power 7.5 kW Mains connection 380 volts, 50 Hz - Fixed stop adjustment in press cylinder 180 mm- SICK photoelectric sensor - 2-hand operation - Substructure made of 160 mm U-steel Space requirement L x W x H 1900 x 1300 x 3100 / 3260 mm Weight 3.6 ton. good condition; used
used
Single Stand - Eccentric Press MÜLLER GEFREES Type PDET 5 S/EK Masch. No. Year of construction 1988 Compressive force 5 ton. Projection 125 mm Stand passage 170 mm Table surface 280 x 220 mm Waste hole 90mm Ram surface 160 x 100 mm Stroke adjustment 4 to 40 mm Ram adjustment 30 mm Installation height largest stroke top max. 210 mm Stroke rate 200 strokes/min. Clamping pin bore 25 mm Table height above corridor 900 mm Motor power 0.55 kW Mains connection 380 Volt, 50 Hz - pneumatic clutch-brake combination - electric foot switches - Control cabinet on the machine Space requirement L x W x H 900 x 600 x 1700 mm Weight 530 kg very good condition; used
used
Single Stand - Hydraulic Press DUNKES Type HZT 2,5 Masch. Nr. H94-2558 Year of construction 1994 Compressive force 2,5 ton. Projection 180 mm Table surface 420 x 300 mm Diarrhoea opening in the table 60 x 185 mm Ram surface 40 mm Pine bore 20 mm Ram stroke 160 mm Installation height max. 250 mm rapid traverse Down 65 mm /sec. Rapid traverse upwards 160 mm/sec. Working speed 8.3 mm/sec. Table height above corridor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 litres Drive power 1.5 kW Mains connection 400 Volt, 50 Hz - Pressure and displacement cut-off - 2-hand operation on the machine - Stroke counter - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read operating hours Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg very good condition; used
used
Pneumatic press, air press BOSCH Type 0840 002 002 Fabr. No. 041 Year of construction 1980 Compressive force 18 KN = 1.8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 bar outreach 100 mm ram stroke 70 mm Table surface 245 x 200 Ram surface 45 mm Installation height max. 235 mm Clamping pin bore 20 mm with clamping screw Compressed air requirement 5 bar - Pressing force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger height adjustable by 90 mm- pneumatic 2-hand operation - mounted on metal base with wooden plates Space requirement L x W x H 1050 x 700 x 1600 mm Weight pneumatic press 82 kg Weight with table base 140 kg good condition; used
used
Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,
used
300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction force 380 kN , table cushion 800 kN , 90 kW , Weight 43.000 kg , ground-level installation
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2563-N Estun E21 Specifications - Max working thickness (S235): do 4.0 mm - Nominal pressure: 630 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - ...
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3225-N Estun E21 Specifications - Max working thickness (S235): do 10.0 mm - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 500 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11700.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor ...
used
Sheet thickness: 25,00 mm void: 2 Table length: 710 mm Table width: 560 mm Knife length: 200 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg: 100000 Distance between column:755mm Table Length: 710mm Table Width: 560mm Table Height: 450mm Ram stroke: 200mm Approche speed: 350mm/min. Work ...
used
Type: 9375 Retrofitted in 2017 with Siemens 840D - max diameter to be turned to centre: 6100 mm - max workpiece height under arm: 2600 mm - vertical travel of ram: 1250 mm - horizontal travel of ram: 1250 mm - swivelangle of tooldhead: 45° + 30° - turntable is movable in order to accomodate workpieces up to 6 meter in diameter - max load on table: 50 ton Chuck dia.: 3300 mm Max turningdia -- passage: 6300 mm Power on the spindle: 75 HP Max hight of workpiece Z-axis: 2600 mm Command: Siemens 840D Number of speeds: 0.60 > 60 rpm Weight: 93 ton TOOLING: yes
used
DORRIES VCE 2400/200 MC/FC 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Plate dia.: 2000 mm Max. turning dia.: 2520 mm Max. turning height: 1990 mm Ram travel: 1500 mm Main drive motor: 75 kW Live spindle: Spindle rotations: 45 - 1500 1/min Spindle motor: 15kW Max. workpiece weight: 12 Ton Tool magazine: 16(turning)+16 (drilling) Station Automatic Tool Changer Auto tool probe Auto detail probe Pallet changer with 3 pallets (turning plates) Table rotation (2 ranges): 1. 2,5 – 70 2. 10-280 Machine space required: 11000 x 11000 mm Video before dismatling
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 97700 € : 1983.31 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.