We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,027 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Railway Wheel Lathe RAFAMET UBB112
used
Guide rails for sorting plant PAGUS 550 x 410 x 95 Inlet: 175 x 50 mm outlet: 5x 55 x 50 mm 2x 60 x 50 mm stainless steel used, checked ! Dimensions: 550 x 410 x 95 mm
used
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg
used
Drawer slides, telescopic slides, drawer pull-outs, heavy-duty pull-outs, drawer slides, drawer pull-outs, telescopic slides, pull-out slides -Retracted length: 695 mm -Length extended: 1227 mm -Price: per pair (left right) -Number: 5x pairs available -Weight: 1.8 kg
used
Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder, WBD holder -Manufacturer: Sikla, WBD holder for mounting rails -Type: HE 0820 41/41 41/45 -Quantity: 12 holders, 4x with clamps -Price/tax: complete -Transport dimensions: 380/250/H105 mm -Weight: 8.8 kg
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/300/2S-RER-SET/9006/1 -Item no.: 45858-01 -Length 300mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 300/100/H40 mm -Weight: 0.3kg/set
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails -Manufacturer: Grass, NP 2-side rectangular railing set -Type: 7607/400/2S-RER-SET/9006/1 -Item no.: F102045860 -Length 400 mm -Quantity: 1x set available -Transport dimensions: 400/100/H40 mm -Weight: 0.4 kg/set
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/450/2S-RER-SET/9006/1 -Item no.: 45861-01 -Length 450 mm -Quantity: 4x set available -Price: per set / minimum order 2 sets -Transport dimensions: 450/100/H40 mm -Weight: 0.4kg/set
used
modernization 2006 Control system 'Siemens' Max working diameter: 700-1500 mm Distance between railway wheels: 1435 mm Regulating distance between railway wheels: 1524 or 1676 mm Length of railway wheels sets: 1640-3000 mm Jaws clamp diameter: 550-1350 mm Max wheel width: 140 mm Spindle turn range: 4 Spindle turn: 9, 13, 5-18, 27 rpm Stepless feed speed range: 1,6-50 mm/min Machine dimensions: 8700 x 3650 x 3250 mm
used
Description: Serial number 31704000, saw blade diameter 350 mm, motor 2.2 kW, mitre cuts possible from -50° to +50°, max. workpiece cross-section 90 x 20 mm, approx. 6000 mm workpiece support, pneumatic workpiece clamping, infinitely variable speed adjustment from 1500 to 3500 rpm Approx. Onsite Dimension. (l x w x h): 6,000 x 1,500 x 2,000 mm, weight approx.: 600 kg
used
Description: Bracket type, FS 1400/2 - L.R 32 plus support bracket, type FS - KS , and screw clamps Loading of the machines only on motor vehicles, trucks with trailers or semitrailers are not possible for space reasons swival range +/-: 45 °, Approx. Onsite Dimension. (l x w x h): 1,400 x 400 x 500 mm, weight approx.: 5 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
used
Description: Column height approx. 3050 mm, arm length approx. 3100 mm, including PC station Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,000 mm, weight approx.: 250 kg
VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,
used
Ethernet switch -compact, industry-compatible switch for mounting on top hat rails -Number: 10 pieces available -Price: per piece -Dimensions: 130/125/H70 mm -Weight: 0.5 kg
used
Ethernet switch -Type: RS30-1602O6O6SDAEHH06.0.02 -compact, industry-compatible switch for mounting on top hat rails -Number: 4 pieces available -Price: per piece -Dimensions: 130/125/H110 mm -Weight: 0.7 kg
new
For workpieces up to 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Powder furnace, extraction stand for double-sided coating, upgradable with automatic coating equipment, be it Gema or Wagner POW C EQ = Powder Coating Equipment
used
This machine is a numerically controlled and cross rail elevating double column type vertical boring and turning mill. Is a machine with two rail heads. One, on the right side is turning head and the other, on the left side is a milling head. The right head is utilized exclusively for turning work and can withstand heavy duty operation, and left performs boring and milling work. After the turning is completed, both heads can be performed without changing the machine set-up. These features, coupled with table indexing and milling feed, assure versatility machining capabilities. The cross rail is guided by the slideways of the two columns. Electro-hydraulic clamping clamping devices assure clamping of the cross rail at the desired position. Highly accurate horizontal straightness is guaranteed by the simple and stabilized method of utilizing the compensation beam inside the cross beam. ...
used
The machine is formed of the following main assemblies: floor table, left and right beds, gantry assembly (a saddle and a column on the each bed , a cross-rail, and a cross beam ) and two milling heads. The gantry is guided by the slideways of the two beds and the cross rail is guided by the slideways of the two columns. The milling heads travel on the cross rail guideways. Inside of the each milling head is guided a ram with the main spindle. Fixed table length 36 000 mm Fixed table width 6 000 mm Distance between columns with covers / without covers 6 900 / 7 100 mm Gantry travel 30 000 mm Cross rail travel 3 100 mm Milling heads (right and left) travel on cross rail 7 400 mm Vertical travel of right and left rams 1 000 mm Gantry work feeds 0 - 6 000 mm/min Gantry rapid feed 10 000 mm/min Milling heads (right and left) work feeds 0 - 3 000 mm/min Milling heads (right and l ...
used
Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Stroke max. 515 mm Construction height Table bottom with rail castors 535 mm Height Table bottom without rail castors 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed Rail chassis approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual switch for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the underframe- Lifting shears with two lifting cylinders - The table was movable on rails, 4 rollers on the base, 200 mm - Drive of the rail rollers via SEW Gear motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm net weight approx. 1.3 ton. good condition; used
used
: gebraucht : 1999 : 8293 : prompt, Zwischenverkauf v : 27800 € : 1 : 2520 mm : 5 mm : 155 ° : 4+1,5 kW : 3950 mm : 830 mm : 1520 mm : 4975 kg min. Clamping width between upper and lower beam 60 mm Lifting height of upper beam 200 mm Height adjustment/transmitting of the lower beam 60 mm Height adjustment/transmitting of thebending beam 60 mm Bending angle / stepless 0-135° Extended bending angle 0-155° Bending speed 4,77 U/min Lifting and lowering speed of the upper beam 4,5 mm/s Working cycle 90° bending 10 s Motor upper beam 2,2 kW Motor bending beam 5,5 kW Foot pedal Flat rail 45°, Split goat foot rail Height 100 mm Length 2105 mm, Radius rail R 33 mm, Bending beam rail 20 mm, Attachment rail 15 mm, Attachment rail 35 mm, 20 Stk. Replacement break plates User manual in german with Declaration of conformity The data for this ad was created with ModulMWS - the software solution ...
used
Roller guide rail, guide rail, running rail, ceiling rail, helmet rail, swivel switch -Rails: with 3-fold swivel switch -Profile width: approx. 40 mm, see photos -Length: 3x 900mm, 1x 825mm -Price/delivery: complete -Transport dimension: 950/300/H130 mm -Weight: 17.2 kg
Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM
used
Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg
used
Grinding machine Löwer ESM 300 Built in 1987 Grinding width 290 mm Sanding belt width 300 mm Oscillating abrasive belt Usable height 120 mm Abrasive belt length 1800 mm Table length 1200 mm With support rail Support rail length 3000 mm Feed speed 3/6/12 m/min. Motor power drive motor 7.5 kW Air connection 6 bar Brush unit in the outlet The abrasive belt is guided over three rollers. Between the two lower rollers is the sanding pad. To get a clean cut, the front lower roller has been rubberized. She takes care of the pre-grinding, and the sanding pad behind it the finishing touches. Weight 798 kg with pallet Dimensions with support rail 3000 mm x 1200 mm x H 1700 mm Dimensions without support rail 1300 mm x 950 mm x H 1700 mm
used
Name: Glass cutter Type: Silver cut No. 550.0 Manufacturer: Bohle-Werkzeugfabrik Condition: used Components: - 1 x base cross (complete with 2 x suction cup, base rail, cross rail) - 4 x clamping piece with suction cup - 4 x extension rail 100 mm - 2 x extension rail 200 mm - 1 x cutting ruler - 1 x slider for small ellipses - 1 x slider for large ellipses - 1 x silver cut glass cutter no. 425.1 with ball-bearing wheel carrier Note: There are no 400 mm extension rails included! Application: - for circular and elliptical cut-outs made of glass plates Original price: 380,00 € tax excl. Price: 239,00 € (VB) plus VAT ex location Grunow (Brandenburg) (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted. ...
used
Second-hand line for the production of prestressed elements from Tecnospan, which includes: contain: Profile Tecnospan P30 For the production of piles and other prefabricated elements such as hollow concrete slabs with a maximum height of 30 cm and a width of 1.20 m. Equipped with a hydraulic roller for the electric cable. Tecnospan C30 Saw For cutting a finished product with a maximum height of 30 cm in the 90-degree Angle. Equipped with a hydraulic roller for the electric cable. Machine for smoothing wall surfaces Device for smoothing product surfaces with a maximum width of 1.20 m. Thanks to this machine, we can also apply a layer of paint. Extrusion machine A machine used to pull strands (cords) from one end of a rail to the other become. Equipped with a hydraulic roller for the electric cable. Clamping machine A hydraulic unit for tensioning the strands drawn on the ...
used
Transport trolley, heavy-duty trolley, electric heavy-duty rail trolley, rail trolley -Manufacturer: Mechanic Maschinenbau Hahn, electric heavy-duty rail car with lifting cylinder -Type: Rail car MTA load capacity 20000 kg -Roller spacing: 2150 mm -Cylinder distance: 2245 mm -Lifting height: 110mm -Drive units: Demag -Individual components: see photos -Total dimensions: 2860/2440/H610 mm -Own weight: 2200 kg
used
Round rail system, profile rails, round rail system -Manufacturer: Strothmann, round rail system RS 25 for heavy loads -Use: for trolleys or similar -Number of basic aluminum profiles: 8 pieces 3005 x 55 x 30 mm 1 piece 2090x55x30mm -Number of aluminum side profile: 20 pieces 3005 x 55 x 30 mm -Number of steel shaft 1 piece Ø 25 x 3000 mm 4 pieces Ø 25 x 2090 mm 6 pieces Ø 25 x 1870 mm -Material: aluminium/steel -Round rail: Ø 25 mm steel -Price/Delivery: Complete - Dimensions box.: 3100/250/H340 mm -Weight: 164 kg
new
Machine description • Machine body designed as torsion-stiff steel welded construction with high static and dynamic stiffness of the welding assemblies • Drive of the upper and bending cheeks on both sides via controlled high-performance drive motors with worm gears • Force initiation of the bending cheek on both sides via tooth segments • Adjustment of the lower cheek mechanically • Adjustment of the bending cheek lowering electromotor • Tool set consisting of: • Clamping rail for upper cheek pointed rail mechanically • Oberwangenspitzschiene • Lower cheek rail with finger grooves • 2 bending rails • Rear stop with 10 stop fingers integrated in support table, max. stop size 1000 mm • Color similar to RAL 7038 / 5010 • Machine in good condition / little used / regularly serviced Working width (useful length) 3020 mm Wor ...
used
Turning diameter: 1250 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW CNC Brand: Siemens Rail track gauge 1,435 mm Max. wheel tread Ø 1,250 mm Min. wheel tread Ø 650 mm in work : 09/2016 Rail Profile : S54 ( retractable rail ) UIC tread patterns : 80- 145 mm Max. wheel flange height : 45 mm Max. load per wheel &n ...
new
Description: -Horizontal band saw Lantzmann BS910E Premium (electric motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -GX630 Honda engine with electric starter -2m rail -Carbide saw band Technical specifications: Engine: Electric motor 11 kW Power: 400V / 50Hz / 3 phases Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: No. Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 2080x750x950 mm Weight: 761/821 ...
used
sheet width: 2540 mm plate thickness: 5,00 mm distance between columns: mm upper beam stroke: 350 mm stroke bending beam: 80 mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: 4,20 x 2,90 x 2,30 m Furnishing - Upper beam stroke: 350mm - Motorized folding beam adjustment - controlled backgauge 1000mm (1500mm with repositioning) - Control Fm100 - Geissfusssatz divided height approx. 130mm - Sharp rail 45 ° - Bending bar: 15mm, 20mm + reinforcement bar 35mm - Radius rail R16mm, length 2000mm - Radius rail R30mm, length 1000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
3 m VTL 33 CNC 2 heads and magazines - REM SC 33 CNC 2MS Technical data: 1. Capacities - Maximum turning diameter with either Vertical Head 3300 mm - Maximum machining height under Cross Rail, at least 2000 mm - Maximum weight of the workpiece 20 tons 2. Table - Table diameter 3000 mm - Speed (inf. Variable) 1- 110 RPM - Main motor drive (AC) 100 KW - 4 jaw chuck with reversible jaws 3. Vertical Heads - Straight Ram vertical travel (250X250 mm cross section) 1300 mm - Horizontal and Vertical travel by means of 10 mm pitch ball screws 4. Cross Rail - Vertical Travel 2000 mm - Cross Rail elevating motor 7.5 KW AC 5. Feeds - Feed ranges 0.1 – 5 mm/rev - Rapid traverse feed 8000 mm/min 6. Overall Sizes Miwie7iv - Dimensions (approx.) L x W x H 6600 x 5.300 x 5.400 mm - Weight (approximate) 60 tons GEOMETRICAL TESTS (ISO 3655, ISO 230 ...
used
Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 kW CROSS RAIL: Cross rail vertical travel: 2500 mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 250 x 250 mm Travel on Z axis: 1600 Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM WEIGHT OF MACHINE TOOL: 180000 kg OVERALL DIMENSION OF MACHINE TOOL: – Length x Width x Height: 13000 x 16000 x 10500 mm
new
Technical Details: Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41; 51)kW Machine tool tape: ...
new
Maximum turning diameter: 8000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE dimensions: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,6÷45 RPM Table speed range –milling mode: 0,05÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41)kW Machine tool tape: ISO 50 WEIGHT ...
new
Description: -Horizontal band saw Lantzmann BS910G PRO (Petrol motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -2m rail -Carbide saw band Technical specifications: Engine: Petrol 27 HP (LONCIN, electric starter) Power: 764 cc Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: Yes Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 1080x750x1050 mm Weight: 722/782 kg -This machine is available right away. ...
used
FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...
used
O-M LTD. CNC Vertical Boring Mill FANUC 16T-A CNC CONTROLS, RETROFIT 1994 CAPACITY: TABLE DIAMETER 4000mm MAXIMUM TURNING DIAMETER 7000mm MAXIMUM TURNING HEIGHT 2900mm MAXIMUN HEIGHT UNDER RAIL 3000mm TABLE WEIGHT CAPACITY 45400kg VERTICAL RAM TRAVEL, Z-AXIS 1500mm HORIZONTAL TRAVEL OF RAM, X-AXIS 2550mm TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 49 IPM RAPID TRAVERSE, CROSS RAIL 12 IPM RAPID TRAVERSE, COLUMN 21 IPM MAXIMUM TORQUE 58,000 LB/FT EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 4000mm T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 50 HP MAIN MOTOR NOTE: MACHINE IS UNDER POWER FOR INSPECTION. WELL MAINTAINED MACHINE IN EXCELLENT CONDITION! RETROFIT WITH FANUC 16T-A CNC ...
used
Combination of Lot nos. 221, 222, 223, 224, 225, 227, 228, 229 and Rails Complete Panel Line in 32 Bay Combination of Lot nos. 221, 222, 223, 224, 225, 227, 228, 229, and Rails Lot 221 PLATE JOINING MACHINE SIMTECH Lot 222 BUTT WELDING MACHINE SIMTECH Lot 223 BUTT WELDING MACHINE SIMTECH Lot 224 Chain conveyor SIMTECH Co. Ltd Lot 225 PLATFORM SUBST. FOR HULL SHOP A/B CUTTING MACHINE Lot 227 LONG FIT-UP MACHINE SIMTECH Lot 228 LONGI WELDING MACHINE SIMTECH Lot 229 Chain Conveyor SIMTECH Co. Ltd Rail span - 27 M Rail 1 - 295 M long Rail 2 - 298.7 long
used
The SCC-1 semi-automatic crown corker is suitable for corking glass bottles with 26 or 29mm crown corks. The clamping unit can be used on crown caps of 26 or 29mm diameter. If both diameters are needed, an additional clamping unit is supplied. The crown cork closing head is made of hardened steel, and it is also resistant to wear over time. The rail guides the crown caps in the correct position. The specific shape of the rail is built specifically for the crown caps in 304 stainless steel. It contains a small amount of crown corks that can be inserted manually. The closing unit pulls the crown caps out of the rail and puts them into the closing cone. On request, a funnel can be fitted to insert a larger quantity of crown caps. In accordance with EC standards, the closing process starts with the simultaneous pressing of two buttons. After positioning the bottle on the holder, the closing ...