rail used for sale

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

used box transport Make KHS 18 m straight transporter 240,-€/m 2 pieces 90 curves without drive 450,-€ several drive/deflection stations 650,-€ Various railing brackets with guides

Robusta Gaukel railing holder for screwing, galvanized Ask our special item WL-27480

Offer: Sgns railway wagons for sale. These are sold from location Europe: Unit price is from Station Europa see specification in the appendix: Offer price for these cars: Price € on request piece plus VAT If you would like more information, please contact us. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Error reserved; All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept any liability for used material. Warr ...

Material: 1.4301/ stainless steel Engine: 55 kW Content: 4600 ltr Weight: 4600 kg General overhauled. Equipment: - control cabinet - frequency converter variable 450 - 1450 rpm - filtering screen - discharge pump - working platform with stairway, base plate for 1 Euro-pallet, standard railing and grates. Very good condition, like new. You can also get the entire system with all components you need. Write us below!

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS

Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.

They offer for 1 post Plettac SL 70 with richly accessories original price net ?86.904,10 / gross ?103.415,87 when required subsets are also available - list see below the numbers of pieces can deviate approx. +/-10%, is subtracted after to actual numbers of pieces. article number text Amount of original price sum SLN57001 Alu-Durchstieg SL B64, 2.50 m, plywood layer, with Leit 16 268.00 ? 4,288.00 ? SLN50000 Alu-Durchstieg SL B64, 3.0 m, aluminium layer, with leader 2 325.00 ? 650.00 ? aluminium-vertical frames SL702000 SL B74, 2.00 m 38 105.00 ? 3,990.00 ? board board SNN14003 150 43 13.90 ? 597.70 ? board board SNN14002 200 46 14.70 ? 676.20 ? board board SNN14001 250 33 16.40 ? 541.20 ? board board SNN14000 300 18 17.50 ? 315.00 ? diagonal SNN60002 200x200 L=2,88m 70 23.50 ? 1,645.00 ? diagonal SNN60001 250x200 L=3,26m 88 25.50 ? 2,244.00 ? SNN60000 Diag ...

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 320mm 3 Knife shaft reversible knife (no more adjustment) Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation WJ-500200 SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Planing knife 320 HSS G&WJ-BA-410-HSS

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

To the fully automatic assembling of parts of the frame. Frame dimensions: min. 120 x 120 mm 700 x 2,200 mm 4 heating Rails for preheating the Miters (procedure with the machine automatically) We have several press in our warehouse (various years).

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Mixing installation on steel construction with pan mixer (150 l. net capacity, 5,5 kW drive, 0,55 kW outlet), skip hoist (1,5 kW drive, incl. winch, rope and rails) and switchgear cabinet. In very good condition, hardly used after full refurbishment.

Screen deck: approx. 1.100 x 3,000 mm, upper deck: 40x40mm, lower deck: 4x4mm PU-meshes, water-spray-bars and pipework on both decks, E-drive 5.5 kW, semi-mobile steel construction with ladders, walkway and railing, sand-blasted and new painted, ready for operation

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

Portal bridge SATRONIK HD 4000 CNC web control CNC 3000M - driving along reference limit switch in X and Y direction - double-sided racks for existing track rails for cutting lengths of 13m (16 m racks) plasma inter Lock circuit for a plasma power source plasma system Kjellberg Fine Focus 800 , cut up to 80mm (cutting data see PDF) -suction-cutting table 3200 x 13200 mm - 2 tables a 1600 mm next to each other filter system type DOWNFLO DFPRO 12- ZU 562 (external installation) The system is under current . Dassembly and commissioning on request; ready for immediate use

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Baeckereikuerschrank BSM 900 S Stainless steel performance for plates 600 x 800 Digital temperature display from - 3 to + 10 Cenergy saving system EHT Ready with 20 pairs of support rails Cadt agent R 134 A Connection 230V/506Watt Mass: 740 x 1010 x 2070 mm, BxTxH DGUV V3-geprueft immediately Available! with performance ; ready to ship

Railway film 420 mm Preferential 600mm Fresh meat machine

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Cutting cutter for small cut - Leo with inlet shaft table railmade made of stainless steel power up to approx. 2000 Broetchen Cutting height adjustable Gebaecke max. 160 x 80 mm, WxH Connection 230V, plug-in mass (WxDxH) in mm: 800 x 440 x 470 optional: -driving table for LEO ; ready to go!

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Technical data: -Total load powered + revolving unit 60000 kg -Load container device 30000 kg -Workpiece diameter 500-4000 mm -Mot Center distance of the support roles. adjustable - diameter 500 mm -Roll width 470 mm -infinitely variable rotary speed 100-1500 mm / min -Torque 5132 NM -Hand-held remote controls for re - and p-drive run - 400 V -Both units are mounted on Rails and -can be moved manually parallel -Space angetr. Unit approx. B H 2800 x 1200 X 1600 mm -Motoryacht. with ongoing unit approx. B H 2800 x 1200 X 1200 mm -Weight angetr. Unit approx. 4800 kg - approximate weight with running unit 3800 kg

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

Warehouse stage make Jungheinrich SBA, built in 2015, Dim.: approx. 45 x 12 m = 540 m ², very good condition, dismantled, System stage, can be varied any stage load 500 kg / m m² with foothold sprinkler system and lighting, height bottom stage () clearance height) approximately 2,650 mm, with railings and 2 staircase stairs, 3 pallet stations, stages covering made of chipboard, girders supports and railings blue/yellow zinc plated,. Price: EUR 32.000.

Bearing platform 8,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions floor area: 8,000 x 5,000 mm Floor area: approx. 40 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: Ok minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 Mounting angle 3 Cross Associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, red, fire Ral 5003, sapphire blue (Other colors on request!) Main and cross beams galvani ...

Bearing platform 12,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions floor area: 12,000 x 5,000 mm Floor area: approx. 60 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 8 stand, one side 100 x 100 x 3 mm 6 main beam C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross member S+300 x 2 mm, L = 4,800 mm (closed) 26 Mounting angle 3 Cross Associations 24 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000 fire red Ral 5003 sapphire blue (other colors on request) Main and cross bea ...

Bearing platform 16,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions floor area max.: 16,000 x 5,000 mm Floor area: approx. 80 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 10 stand, one side 100 x 100 x 3 mm 8 main beam C+300 x 3 mm, L = 3,990 mm 18 cross member S+300 x 2 mm, L = 4,800 mm 36 Mounting angle 4 Cross Associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000, red, fire Ral 5003 sapphire blue (other colors on request) Main and cross beams galvanized  ...

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...

Various new parts ( warehousing ) for BA 25 Y- Axis Ball-circuit threaded spindle with nut 40x10 mmx 761x939 with nut piece as good as new (packaged) Linea guides X-axis : New as good as new (stock) 2 pcs. linear guide provil rails THK approx. 2500 mm lg size 45 x38 4 pcs. linar guide slide THK HSR 45 Lg: 120 mm - Steel body whole,tlg approx. 168 mm 2 pcs. linar guide slide THK HSR 45 Lg: 98 mm - Steel body total,tlg approx. 136 mm 6 St. OTT Rotary Feedthroughs Type: 2K Rotary feedthroughs -KE M 42 x1.5 as good as new (or partially overhauled General -used) Ware Order No. 95.101.066.2.2 Fabr: Fabr. OTT- Jakob GmbH &Co. Spanntechnik KG 1 St. 1 St. Guide Box org. KOSTYRKA as good as good stock -pk-5350.1196.00370617/11 Sale individually or in whole pack set

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

suitable for 60x80 cm sheets ( planks ) and also 60x40 cm boxes plug-in compressor on top up to -18 to -20 degrees Celsius without support rails Door right and left in stock in stock larger quantities please ask for price Sale only to commercial traders or export Dimensions: Height: approx. 216 cm Width: approx. 77 cm Depth: approx. 103 cm

Steel platform with ladder, steel construction, machine platform, steel scaffolding used Manufacturer: EHINGER IMPIANTI Height to platform approx. 4.2 m + 1.1 m railing Pedestal 1.7 x 1.9 m Ladder with back protection Dimensions total approx. 1.7 x 2.7 x 5.3 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

1 new Holtec PICCOLO the Piccolo is handy, precise and flexible. mobile parcel crosscut saw in light design, e.g. for cutting and finishing on sawn timber packages Chain set with STIHL chain Type Rapid Super 0.404" for extremely fine surfaces and two-sided adjustable guide rails (can be used four times) Electric motor 7.5 kW great cutting performance for packages up to 1.15 m x 1.15 m and roundwood diameter up to 1.30 m Sword Length: 1.60 m