rail used for sale

PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, tie rod   openings in uprights: yes   table cushion: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 1780 mm   table surface (front-back): 1300 mm   opening in bed (left-right): 1445 mm   opening in bed (front-back): 260 mm SLIDE   slide force: 200 to   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 178 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION)   number of cushions: 11  & ...

TECHNICAL SPECIFICATION   Max. diameter of tube: 65 mm   Max. wall thickness: 2 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5400 mm   space requirements -front/back-: 1550 mm   total height: 1500 mm   total weight approx.: 6500 kg + 8-axis CNC pipe and wire bender + CNC controlled feeder with pneumatic grippers + separate servo drives for   A-axis:  rotation unit 35 mm   B-axis:  bending heand   C-axis:  feeder   D-axis:  mandrel device   L-axis:  slide rail   P-axis:  chucking device   V-axis:  counter holder   Y-axis:  bending   Z-axis:  bend ...

There is a truck tyre cold retreading line available, plant includes (1) Rail System Helm, length: 250m, with uprights and switches (2) Shearography Marangoni ITT 3000 SFERA, weight: 4t (3) 2x Pressure Control Collmann, year of construction: 1980 (4) Broaching Machine Collmann, year of construction: 1998 (5) Broaching Machine Marangoni (6) Carcass control (7) Repair station (8) AZ Extruder Tool Temp (9) Cutting table (10) Envelope Spreader (11) Autoclave Scholz, capacity: 47. 000l, length: 18.000mm, with automatic change system, year of construction: 1998 (12) Pressure Vessel Alup (13) Pressure Vessel Otto Boge, year of construction: 1970 (14) Compressor Alup SOLO 15, year of construction: 2005 (15) Compressor Kaeser CS 76, year of construction: 1999 (16) Compressor Kaeser CS 76, year of construction: 1999.

Description: The Adira PA16030 is an unused press brake with a 1600 kN capacity and 3000 mm working length. Control Control System: CYB Touch 8 Numerical Control: Cybelec VisiPAC Working Parameters Condition: New/Unused Capacity: 1600 kN Working Length: 3000 mm Distance Between Housings: 2550 mm Max Stroke: 260 mm Max Open Height Without Tools: 500 mm Throat Depth: 400 mm Motor and Power Motor Power: 15 kW Speed Approach Speed: 150 mm/s Working Speed: 10 mm/s Returns Speed: 150 mm/s Speed X: 800 mm/s Speed R: 200 mm/s Speed Z-Z1/Z2: 1200 mm/s Speed X1: 100 mm/s Axis Travel Stroke X: 625 mm Stroke R: 200 mm Stroke Z-Z1/Z2: 90 to 2150 mm Stroke X1: +/- 100 mm Dimensions Length: 3760 mm Width: 1840 mm Height: 2910 mm Transportation Height: 2710 mm Weight Weight: 7900 kg Extra Equipment Table: 13 mm for Wila type Dies 'Table Kit III' Back Ga ...

Description: Serial number: 24904, Own weight: 21,000 kg Equipment: Tie-bar-less, including rail guide underneath INFO: Device can be dismantled and is available at short notice Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 5,000 x 2,680 x 2,800 mm, weight approx.: 21.000 kg

Description: 750 x PTF-S display module 8 x Controller/interface between control computer and compartment displays 1 x Wireless 2D hand-held scanner with base station System licence - KBS Device Manager control software for paperless order pickingpicking with the following basic functionality - Display, diagnostic and maintenance functions - Zone management - Conversion of logical to physical coordinates - Quantity correction - Zero crossing control for inventory function - Basic software without inventory management - Communication via TCP/IP sockets - with web interface - Shelf length complete 19 m (3 further units without picture á 1.1 m) - Shelf height 2.65 m - Shelf depth 1.15 m Shelf height at bottom: approx. 1.4 m Top shelf height: approx. 0.9 m Small part compartment height in the first three shelves approx. 1,040 mm + approx. 250 mm For the 3 stored shelving units approx ...

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 50t / 50t Span: 14500 ,mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 301043 Wheel diameter: 350 mm Trolley travelling speed: 5 / 20 m/min Disc brake Total electrical connection values Total connected load: 84 kW Starting current (for voltage drop calculation): 407,9 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011368, distance: 14,500 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 50,000 kg, Approx. Onsite Dimension. (l x w x h): 15,500 x 5,200 x 2,400 mm, weight approx.: 19,500 kg

Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 63t / 63t Span: 20150 mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 303333 , Number of wheels: 8 Wheel diameter: 420 mm Speed: 10 / 40 m/min Disc brake Total electrical connection values Total connected load: 148 kW Starting current (for voltage drop calculation): 747.7 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011364, distance: 20,150 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 63 kg, Approx. Onsite Dimension. (l x w x h): 22,000 x 5,000 x 2,500 mm, weight approx.: 45,000 kg

:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mm swing diameter:1250|1600|2000|2300 mm turning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mm table speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/min transmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 t max. torque on the faceplate:20|25|25|25 KN rapid feed of tool post:8000|3000|3000|3000 mm/min feed speeds:0.1 - 500 mm/min Max. cutting force of tool head :18|25|30|30 KNm Travel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mm Travel of ram (horiz.):850|1000|1115|1400 mm Cross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mm power maindrive:22/30|30/37|37/45|37/45 kW weight of the machine ca.:9|12,5|18,5|20,5 t Machine size (LxWxH):2360x2277x3403|26 ...

:KDM-K 12| KDM-K 16 | KDM-K 20 | KDM-K 23 | KDM-K 26 faceplate diameter:1000|1400|1800|2000|2300 mm swing diameter:1200|1600|2000|2300|2600 mm turning height:1000|1250|1400|1600|1500 mm table speeds:6,3- 200|5-160 | 3.2-100 | 5-160 | 2,5- 80 m/min transmission ratio:16 max. workpiece weight:3,2|5|8|8|8 t rapid feed of tool post:1800 mm/min feed speeds:0,8-86 mm/min in X-Achse Travel of Ram (vertical):650/700|800/1000|800/1000|800/1000/1300|1000/1380 mm Travel of ram (horiz.):630|915|1115|1250|1500 mm max. vertical adjustment of side-support:900|900|980|980 mm max. horizontal adjustment of side-support:630|630|500|500 mm Cross rail travel :850/1100|890/990/1240/1640|1240/1640 mm power maindrive:22|30|37|37 kW weight of the machine ca.:9|14|18|23|21 t Machine size (LxWxH):2299x2540x3403|2660x26603698|3135x3070x3910|3380x3360x4300|390 0x2950x4400 mm tool holder:5 fach :LED 4 jaw chuck:mit  ...

faceplate diameter:4700/5700 mm swing diameter:6300 mm turning height:3150/4000 mm workpiece weight:63/100 t table speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNm slide stroke:vertikal: 1600/2000 mm slide stroke:horizontal: 3400 mm cross section of ram:240x240/280x280 mm Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:90/110 kW weight of the machine ca.:110/170 t Machine size (LxWxH):9000x7000x8000 mm control:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

faceplate diameter:6300 mm swing diameter:8000 mm turning height:4000 mm workpiece weight:120 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2500 mm slide stroke:horizontal: 4350 mm cross section of ram:280x280 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:190 t Machine size (LxWxH):11000x9000x8000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right ha ...

faceplate diameter:4000 mm swing diameter:5000 mm turning height:2500 mm max. turning diameter:5000 mm table load:40 t table rotation speed:0,1-80 (2-stufig) U/min max. torque on the faceplate:108000 Nm Travel of Ram (vertical):1800 mm Travel of ram (horiz.):-2500~+2900 (aus Tischmitte) mm ram head dimension:300x300 mm spindle speed:10-2500 (2-stufig) 1/min spindle taper:50 SK rapid power traverse in X-and Z direction:10/10 m/min feed speeds:1-3000 mm/min Cross rail travel :1680 mm Tool changer:12-fach für rechten Stößel (für Drehwerkzeuge) Tool changer:60-fach für linken Stößel (für Fräswerkzeuge) tool taper:SK50/BT50 Machine height:s. Anlage mm machine length:s. Anlage mm machine width:s. Anlage mm drive capacity - spindle motor:18,5/22 kW coolant pump drive:3 kW servo motor X-axis:9 kw servo motor Z-axis:9 kw table drive:100 kW :300 kva positioning accuracy:0,01/500 mm repeat ...

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:500 mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

faceplate diameter:6000 mm swing diameter:6500 mm turning height:3000 mm slide stroke:2500 mm cross rail adjustment - vertical:1800 mm faceplate turning speed range:0,40 - 78 U/min workpiece weight max.:80.000 kg main drive motor:150 kW total power requirement:180 kW weight of the machine ca.:160 t dimensions of the machine ca.:15 x 10 x 8,7 ü.F. m with CNC NUM 1060 hydrostatic guideways 6000 mm power chuck C-axis driven tooling SK 50 / 30 KW / 6 - 2000 rpm. angular milling head automatic toolchanger 50 pockets turning toolholders CAPTO C 6 / 47 Milling toolholders SK 50 coolant attachment and chip conveyor

R26097/16 EDELMANN Continuous Printing Machine Model: COLOR PRINT V72 SL Built: 2008 Paper web width: max. 720 mm Printing width: max. 710 mm Availability: approx. 12/2011 Servo drive Microprocessor control R/R, R/B Flattening: roll diameter max. 127 cm BST web edge and center control Track length control 2 offset printing towers Automatic inking unit washing Railway turning device Hole punching unit Cross cutters UV dryer Plough folding system Available: by arrangement

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

Explosion-proof dissolving line, consisting of: 1 pc. Drais Dissolver RSV 41 EX (31,6 kW), 2 pcs. high pressure vessels 1.250 l. (V2A, 7 bar), 1 pc. stage with rails and stairs.

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

used box transport Make KHS 18 m straight transporter 240,-€/m 2 pieces 90 curves without drive 450,-€ several drive/deflection stations 650,-€ Various railing brackets with guides

Robusta Gaukel railing holder for screwing, galvanized Ask our special item WL-27480

Offer: Sgns railway wagons for sale. These are sold from location Europe: Unit price is from Station Europa see specification in the appendix: Offer price for these cars: Price € on request piece plus VAT If you would like more information, please contact us. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Error reserved; All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept any liability for used material. Warr ...

Material: 1.4301/ stainless steel Engine: 55 kW Content: 4600 ltr Weight: 4600 kg General overhauled. Equipment: - control cabinet - frequency converter variable 450 - 1450 rpm - filtering screen - discharge pump - working platform with stairway, base plate for 1 Euro-pallet, standard railing and grates. Very good condition, like new. You can also get the entire system with all components you need. Write us below!

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS

Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.

They offer for 1 post Plettac SL 70 with richly accessories original price net ?86.904,10 / gross ?103.415,87 when required subsets are also available - list see below the numbers of pieces can deviate approx. +/-10%, is subtracted after to actual numbers of pieces. article number text Amount of original price sum SLN57001 Alu-Durchstieg SL B64, 2.50 m, plywood layer, with Leit 16 268.00 ? 4,288.00 ? SLN50000 Alu-Durchstieg SL B64, 3.0 m, aluminium layer, with leader 2 325.00 ? 650.00 ? aluminium-vertical frames SL702000 SL B74, 2.00 m 38 105.00 ? 3,990.00 ? board board SNN14003 150 43 13.90 ? 597.70 ? board board SNN14002 200 46 14.70 ? 676.20 ? board board SNN14001 250 33 16.40 ? 541.20 ? board board SNN14000 300 18 17.50 ? 315.00 ? diagonal SNN60002 200x200 L=2,88m 70 23.50 ? 1,645.00 ? diagonal SNN60001 250x200 L=3,26m 88 25.50 ? 2,244.00 ? SNN60000 Diag ...

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 320mm 3 Knife shaft reversible knife (no more adjustment) Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation WJ-500200 SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Planing knife 320 HSS G&WJ-BA-410-HSS

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

To the fully automatic assembling of parts of the frame. Frame dimensions: min. 120 x 120 mm 700 x 2,200 mm 4 heating Rails for preheating the Miters (procedure with the machine automatically) We have several press in our warehouse (various years).

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Mixing installation on steel construction with pan mixer (150 l. net capacity, 5,5 kW drive, 0,55 kW outlet), skip hoist (1,5 kW drive, incl. winch, rope and rails) and switchgear cabinet. In very good condition, hardly used after full refurbishment.

Screen deck: approx. 1.100 x 3,000 mm, upper deck: 40x40mm, lower deck: 4x4mm PU-meshes, water-spray-bars and pipework on both decks, E-drive 5.5 kW, semi-mobile steel construction with ladders, walkway and railing, sand-blasted and new painted, ready for operation

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

Portal bridge SATRONIK HD 4000 CNC web control CNC 3000M - driving along reference limit switch in X and Y direction - double-sided racks for existing track rails for cutting lengths of 13m (16 m racks) plasma inter Lock circuit for a plasma power source plasma system Kjellberg Fine Focus 800 , cut up to 80mm (cutting data see PDF) -suction-cutting table 3200 x 13200 mm - 2 tables a 1600 mm next to each other filter system type DOWNFLO DFPRO 12- ZU 562 (external installation) The system is under current . Dassembly and commissioning on request; ready for immediate use

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Baeckereikuerschrank BSM 900 S Stainless steel performance for plates 600 x 800 Digital temperature display from - 3 to + 10 Cenergy saving system EHT Ready with 20 pairs of support rails Cadt agent R 134 A Connection 230V/506Watt Mass: 740 x 1010 x 2070 mm, BxTxH DGUV V3-geprueft immediately Available! with performance ; ready to ship

Railway film 420 mm Preferential 600mm Fresh meat machine