radial used for sale

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

turning diameter: 100 mm turning length: siehe Datenblatt mm control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Almost new machine Ultra precision hard lathe for hardened workpieces up to 70 HRC Hydrostatic spindles Direct-drive axles in X and Z ! Hydrostatic guideways -2 spindle 10.000 rpm 8.000 rpm -Sauter tool turret 6 tools fixed / 6 tools driven axial/radial machining with Benz tool systems (engraving, drilling, milling) -Hainbuch clamping system -Schaublin clamping system -jaw chuck -tool measuring system / probe for component measurement -Preparation for automation cell -Chip conveyor -suction system -cooling unit -Fire extinguishing system for applications with oil-KSS Translated with www.DeepL.com/Translator (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKUR0246 LocationBarneveld MakeHosokawa Alpine TypeZirkoplex 100 ZPS No.P1 140072/1 Main Features Motor4 KW Inlet diameter85 mm Specified Features - Classifier mill MaterialStainless steel 1.4571 (316Ti) Classifier Mills GrinderZirkoplex Classifier mill InletDia: 85mm Feeding with rotating valvecheck Hosokawa, type ZSA-200 V4A easy clean: 15 rpm Motor4 kW 230/400 Volt (Ex) , 3 kW 230/400 Volt (Ex) Speed4 kW motor: 860-4300 rpm, 3 kW motor: 1150-5800 rpm Information Year of construction2004 Mounted on framecheck With switchgearas is Total height4,5 m CEcheck Floorspace2,2x4,2 m ATEX compatiblecheck Extra Specificationswith: : radial fan: KIEKENS HKEN 100100 S, motor: 11 kW 400/690 Volt, 3000 rpm. air cooled chiller: Rehsler TEA 051, 6 bar, ambient temp.: 5 - 40 °C, material 1.4408 dosing screw Hosokawa Alpine PDD30, 0,37 kW, 10-174 rpm., :material 1 ...

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

Knife profiling machine for producing profiled knives from a solid blank according to a template. Technical data: Grinding disc diameter max. 225mm Grinding wheel width 5mm Grinding wheel bore 60mm Tool diameter max. 290mm Tool diameter min 90mm Tool width max 230mm Grinding disc drive 1.1KW Motor speed 1420 rpm Stepless gearbox n=500...3000 rpm Grinding spindle speed n 1 = 1720 rpm n 2 = 2000 rpm n 3 = 2500 rpm n 4 = 2820 rpm Radial clearance angle (at the back) 1030 degrees Axial clearance angle (to both sides) 0.20 degrees Coolant pump 0.28KW

The V mixer develops a smooth and fluid mixing process of solid / solid in any percentage and solid / liquid in powder or granule form and with different specific weights. Due to its shape, it creates axial currents inside that separate and unite the material to be mixed and which, together with the radial action of the mix, results in a fast and homogeneous mix without using deflating blades or other mechanical devices. It also has a compressed air system installed on the axes so that it does not suffer loss of product through friction and cannot contaminate the load to be mixed.

V Mixer with 1.000 liters stainless steel breaker NEW Description This type of mixer is driven by a motor-reducer that acts directly on the axis of rotation, rolling at the revolutions necessary to obtain a perfect mixing. The V mixer develops a smooth and fluid mixing process of solid / solid in any percentage and solid / liquid in the form of powder or granules and with different specific weights. Due to its shape, it creates axial currents inside it that separate and join the material to be mixed and which, together with the radial action of the mixture, results in a fast and homogeneous mixing without using deflator blades or other mechanical devices. Capacity: 1,000 liters. Reduction motor power: 3 kw. Breaker motor power: 1.5 kW. Applications: for the industries of FOOD, PHARMACY, COSMETICS, COLORS, FEEDS, ABRASIVES, FERTILIZERS, DETERGENTS, PLASTICS, INSULATORS, PULVIMETALURGY A ...

Romaco Fryma Koruma Dinex process mixing vessel suite in UNUSED condition comprising of the following:- Main Process Vessel: 1300L scraped wall, contra rotating, jacketed, full vacuum +6bar. Bottom entry homogeniser mounted in vessel base unit which also houses the hydraulic raise/lower powerpack for the vessel lid, vacuum pump, centrifugal CIP pump, shrouded in stainless steel. 8 off top connections and level sensor, 300mm dia hinged safety interlocked chargeport with sightglass and light. Scrape wall mixer 5kw, contra rotating mixer 4kw. 45kw 2865rpm homogeniser. Additional vessels: 1300L jacketed premix vessel on load cells, scraped wall mixer with baffles. 400mm dia safety interlocked hinged chargeport with sightglass and light. 4 off top entry infeed connections, 3 stainless steel lobe pump mounted onto vessel framework, 4 outlet with pneumatic actuated valve. 100L powde ...

VARIOUS SIZES AVAILABLE, Example : for a 250 mm. screen Ø:, Single plate with 2 sliding breakers with radial holes 6,5 mm.diam. Screen diam.250 mm. Construction in steel on n.1 supporting wheeled cart Heating through 4 plate heaters W 3.750 V.240 each one Total power 23 Kw Hydraulic l power station 7,5 kw with control electrovalves, n.2 storage units Pump group externally positioned PTFE ring N.2 temperature controls on drawers N.2 temperature controls on bodies Max work temperature 260 °C Complete with all safety devices Control panel on hydraulic pack Pressure transducer User’s manuals, drawings CE, TYPE: Semi-automatic, non-stop

max. wheel diameter: 2400 mm gear width: 600 mm max. module: 30 Control: Sinumerik 840 D workpiece external diameter max.: 3400 rim strength max.: 500 radial slide travel: 1050 mm axial slide travel: 1600 mm swivelling range milling head: +- 15 ° table diameter: 1870 mm table hole: diameter: 600 mm depth: 875 mm table load capacity - central/maximum: 30000 kg workpiece: tip circle diameter: 440 mm root circle dia. min.: 310 mm cutter width - max.: 120 mm total power requirement: 100 kW weight of the machine ca.: 37,5 t dimensions of the machine ca.: 12,3 x 5,6 x 4,4 m machine can be used only for internal gears - dry cutting type Equipment/accessories: - column increased - internal head IKF2 - big clamping table - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK  ...

Clampable cutter head type (max.): 460 mm Cutter head weight (max.): 150 kg Mounting disc diameter for cutter heads (Ø): 360 mm Mounting cone for cutter heads Nominal diameter: Ø 58,227 mm travel -z axis: 200 mm diagram-drawing enlargement: ±10 - ± 500 µm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC- ...

Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max.  ...

We sell turning and milling center with Y axis (BU) - 2023. Borui BR200LDY (446020502250mm, weight 4t) equipped with a parts catcher, parts conveyor, chip conveyor, chip cart spindle 8, throughput in spindle 52mm head 12 tools BMT45 FANUC rack, FANUC drives and motors high pressure pump 20BAR, hydraulic tailstock, 11 BMT45 driven tool holders, radial and axial (new) the machine is cleared by customs, you just have to pay on top for delivery from Minsk to your city

Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, suction, chip blower -Manufacturer: Höcker Polytechnik, mobile filter system -Motor power: 2.2 kW -Speed: 2865 rpm -Connection input: Ø 160 mm -Base: on wheels -Dimensions: 1130/560/H2070 mm -Weight: 70 kg

Three-phase electric motor EVIG BUDAPEST VZP 160 M4 ( VZP160M4 ) 11 kW 1440 rpm 220 / 380 V 3 AC 50 Hz IP44 design: B5 shaft diameter: Ø 42 mm wavelength: 110 mm groove width: 12 mm gear: Ø 86, width: 12 mm, teeth: 29 flange: Ø 230 / 300 mm bolt circle diameter: Ø 265 mm hole diameter: Ø 14.5 mm drive motor for e.g. radial drilling machine CSEPEL RFH75 used, tested ! Dimensions: 625 x 315 x 380 mm

Three-phase electric motor EVIG BUDAPEST VZP 100 Ln4 ( VZP100Ln4 ) 3 kW 1440 rpm 220 / 380 V 3AC 50 Hz IP44 Design: B5 shaft diameter: Ø 28 mm Wavelength: 60 mm Groove width: 8 mm gear: Ø 54, width: 19 mm, teeth: 19 flange: Ø 180 / 250 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 15.5 mm drive motor for e.g. radial drilling machine CSEPEL RFH75 used, tested ! Dimensions: 405 x 250 x 280 mm

Number of boring spindles: 6 St. Working width: 230 mm Working height: 120 mm 1 WEINIG planing and moulding machine Unimat 23 - 6 spindles, year 2000 Machine will be checked by our technicians! -------------------------------------- Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle below 5.5 KW mechanical brake Diameter 40mm Speed 6000 rpm Tool flight circle 125 - 180 mm Folding device including tools Table insert hardened in front of the 1st lower spindle 2nd spindle right 7.5 KW mechanical brake common motor with left vertical spindle Diameter 40mm Speed 6000 rpm Tool flight circle 112-250 mm Max. tool diameter behind stop level 203 mm Max. throat depth 35 mm Adjustment path axial 80 mm Right spindle pneumatically axial via selector switch (40 mm) controlled. 3. Spindle on the left common motor with 2nd spindle Diameter 40mm Speed 6000 rpm Tool flight circle 112-200 mm Ma ...

turning diameter: ca. 850 mm turning length: 6000 mm control: Heidenhain 620 centre distance: 6000 mm swing diameter over bed slide: 1250 mm swing diameter max. over cross slide: 850 mm radial face slide adjustment: 680 mm spindle bore: 130 mm main drive AC:: spindle capacity 100% / 60% ED: 37 / 52 kW max. torque: ca. 9000 Nm turning speed range: 5 - 710 U/min feed motor AC:: rapid traverse X-axis: 6 m/min rapid travel Y-axis: 3 m/min tailstock:: diameter of quill: 160 mm quill stroke: 315 mm quill holder (inner taper): MK 6 steady, closed: passage: 450 mm total power requirement: 52 kW weight of the machine ca.: 16,5 t Overall size: 9000 x 2200 x 2300 mm dimensions of the machine ca.: 12 x 4 x 2 m Equipment/accessories: - face plate diameter 1200 mm - various fixators - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, suction, chip blower -Manufacturer: Spänex, mobile filter system -Motor: Siemens 0.75 kW -Speed: 2850 rpm -Connection input: Ø 140 mm -Base: on wheels -Dimensions: 680/680/H2290 mm -Weight: 60 kg

Description: Coromant Capto reducing adapter, quantity = 2 pieces ISO: C8-391.02-63 055A Product data: - Machine direction adapter interface -Coromant Capto (segment clampingonly) -size C8 - Facing adjustment - Coromant Capto (bolt clamping) -size C6 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 80 bar - Recording diameter - 80 mm - Functional diameter - 55 mm - Recording diameter, workpiece side - 63 mm - Functional length - 55 mm - Body diameter - 63 mm - Length body diameter - 55 mm - Torque - 170 Nm - Tool design - steel - Mass (weight) - 2.133 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - CoroTurn SL, quantity = 2 pieces ISO: C8-570-2C 50 125-40R Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - axial runout setting - 40 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 70 bar - Recording diameter - 80 mm - Recording diameter, workpiece side - 40 mm - Functional length - 81 mm - Body diameter - 40 mm - Length body diameter - 81 mm - Torque - 17 Nm - Tool design - steel - Mass (weight) - 2.17 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on shrink chuck, quantity = 4 pieces ISO: C8-391.19-16 095 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (shrink fit) -metric: 16 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 16 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 95 mm - Body diameter - 27 mm - Length body diameter - 43.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.018 kg Approx. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 15 kg

Description: Coromant Capto on shrink chuck, quantity = 4 pieces ISO: C8-391.19-20 095 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (shrink fit) -metric: 20 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 20 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 95 mm - Body diameter - 33 mm - Length body diameter - 56.5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.127 kg Approx. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 15 kg

Description: Adapter Coromant Capto - CoroTurn SL, quantity = 2 pieces ISO: C8-570-2C 40 081L Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - axial runout setting - 40 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 70 bar - Recording diameter - 80 mm - Recording diameter, workpiece side - 40 mm - Functional length - 81 mm - Body diameter - 40 mm - Length body diameter - 81 mm - Torque - 17 Nm - Tool design - steel - Mass (weight) - 2.17 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - CoroTurn SL, quantity = 2 pieces ISO: C8-570-2C 50 125-40L Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - axial runout setting - 40 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 70 bar - Recording diameter - 80 mm - Recording diameter, workpiece side - 40 mm - Functional length - 81 mm - Body diameter - 40 mm - Length body diameter - 81 mm - Torque - 17 Nm - Tool design - steel - Mass (weight) - 2.17 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - CoroTurn SL, quantity = 2 pieces ISO: C8-570-2C 40 081R Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - axial runout setting - 40 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 70 bar - Recording diameter - 80 mm - Recording diameter, workpiece side - 40 mm - Functional length - 81 mm - Body diameter - 40 mm - Length body diameter - 81 mm - Torque - 17 Nm - Tool design - steel - Mass (weight) - 2.17 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 -  ...

This EMCO HYPERTURN 65-1300 DUOTURN CNC Turn-Mill Center was built in the year 2018 in Austria. It is equipped with a SIEMENS Sinumerik 840D SL Control and 2 turrets including milling drive and 2 Y-axes. This highly productive CNC turning/milling center is perfect for the complete machining of turned and milled parts with 1300 m spindle distance. It has integrated spindle motors (ISM) on the main and counter spindles with a spindle speed range from 0 - 5000 min-1. This complete center features 2x 12-fold tool turret radial with directional logic for up to 2x 12 driven tool stations (swivel speed adjustable with feed switch). It comes with several extras from MT65/HT65 BigBore77 to BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 (the VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface). See original PDF (German) with all positions attached. Ch ...

spindle passage: H: 65 / G: 51 mm numbers of positions in the tool changer: 2x12 control: FANUC 18i-T tool taper: BMT55 collet chuck: Hainbuch (RD65) CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Coromant Capto extension adapter, quantity = 4 pieces ISO: C8-391.01-80 100A Product data: - Machine direction adapter interface -Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Coromant Capto (bolt clamping) -size C8 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 80 bar - Recording diameter - 80 mm - Functional diameter - 55 mm - Recording diameter, workpiece side - 80 mm - Functional length - 100 mm - Body diameter - 80 mm - Length body diameter - 110 mm - Torque - 170 Nm - Tool design - steel - Mass (weight) - 3.7 kg Approx. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 15 kg

Description: Coromant Capto on milling arbor holder, quantity = 1 piece ISO: C8-391.05C-16 050 Product data: - Machine direction adapter interface -Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Arbor -ISO 6462 -A/B (center bolt/washer) -metric: 16 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 4: axially concentric on circle - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 16 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 50 mm - Body diameter - 80 mm - Length body diameter - 50 mm - Torque - 22 Nm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.095 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

This 6-axis lathe manufactured in 2010 features a TORNOS Deco Sigma 32 with a main spindle speed of 8,000 rpm, Z1 axis travel of 230 mm, bar capacity of 32 mm, and rapid traverse rate of 30m/min. It includes a Robobar barfeed magazine, accommodating a variety of machining needs with 14 tools on the main toolpost, and both radial and axial rotating tools. With immediate availability, the TORNOS Deco Sigma 32 machine we have for sale represents a versatile and efficient solution for precision machining. For more details, please contact us to explore this opportunity further.

Description: CoroCut 1-2 cutting head for axial grooving / quantity = 1 piece ISO: 570-40R123H18B220A Product data: - Cutting depth, max. 18 mm - Axial piercing diameter, min. 220 mm - Fastening type of cutting insert = C: clamp on top of insert - Axial piercing diameter, max. 500 mm Part 2 of the identifier for the tool interface / CoroCut 2 -size H (N123H2- 0400-0004-TF) - Axial insert support, orientation = 1 - Adapter interface machine direction = SL head (screw mounted) -size 40 - Body angle, workpiece side = 90 deg - Maximum collar length = 18 mm - Cutting direction = R - Code for cooling lubricant supply = 1: axial concentric entry - Cooling lubricant outlet = 2: radial exit - Coolant pressure = 40 bar - Recording diameter = 40 mm - Functional length = 18 mm - Functional width = 45.1 mm - Functional height = 0.1 mm - Torque = 3 Nm - Mass (weight) = 0.209 kg Approx. Onsite Dimensio ...

Description: Adapter Coromant Capto - straight shaft, quantity = 1 piece ISO: C8-131-00112-40 Product data: - Machine direction adapter interface -Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping w/ flats (sleeve) -metric: 40 - Maximum collar length - 112 mm - Cutting direction - N - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 80 bar - Recording diameter - 80 mm - Recording diameter, workpiece side - 40 mm - Clamping length 72 mm - Functional length - 112 mm - Functional width - 0 mm - Functional height - 0 mm - Body diameter - 80 mm - Length body diameter - 112 mm - Torque - 50 Nm - Tool design - steel - Mass (weight) - 4.19 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - straight shaft, quantity = 1 piece ISO: C8-131-00098-25 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping w/ flats (sleeve) -metric: 25 - Maximum collar length (OHN) - 98 mm - Maximum collar length (OHX) - 98 mm - Cutting direction - N - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 80 bar - Recording diameter - 25 mm - Recording diameter, workpiece side - 40.8 mm - Clamping length 57 mm - Functional length - 98 mm - Functional width - 0 mm - Functional height - 0 mm - Body diameter - 63 mm - Torque 40 Nm - Tool design - steel - Mass (weight) - 3.425 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - straight shaft, quantity = 1 piece ISO: C8-131-00110-40 Product data: - Machine direction adapter interface -Coromant Capto (segment clampingonly) -size C8 - Facing adjustment - Cylindrical clamping w/ flats (sleeve) -metric: 40 - Maximum collar length - 110 mm - Cutting direction - N - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 80 bar - Recording diameter - 80 mm - Recording diameter, workpiece side - 40 mm - Clamping length 102 mm - Functional length - 110 mm - Functional width - 0 mm - Functional height - 0 mm - Body diameter - 80 mm - Tool design - steel - Mass (weight) - 2.91 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on shrink chuck, quantity = 1 piece ISO: C8-391.19-10 090 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (shrink fit) -metric: 10 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 10 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 90 mm - Body diameter - 24 mm - Length body diameter - 50.2 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 1.982 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-06 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 6 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 25 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 36 mm - Functional length - 70 mm - Body diameter - 17 mm - Length body diameter - 4 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.113 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-10 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 10 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 10 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 45 mm - Functional length - 70 mm - Body diameter - 27 mm - Length body diameter - 4 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 10 Nm - Tool design - steel - Mass (weight) - 2.207 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on milling arbor holder, quantity = 1 piece ISO: C8-391.05C-22 030M Product data: - Machine direction adapter interface -Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Arbor -ISO 6462 -A/B (center bolt/washer) -metric: 22 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 4: axially concentric on circle - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 22 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 30 mm - Body diameter - 80 mm - Length body diameter - 30 mm - Torque - 45 Nm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 1.86 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-12 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 12 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 12 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 48 mm - Functional length - 70 mm - Body diameter - 32 mm - Length body diameter - 5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.3 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-14 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 14 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 14 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 48 mm - Functional length - 70 mm - Body diameter - 34 mm - Length body diameter - 5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.315 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on milling arbor holder, quantity = 1 piece ISO: C8-391.05C-27 030M Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Arbor -ISO 6462 -A/B (center bolt/washer) -metric: 27 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 4: axially concentric on circle - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 27 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 30 mm - Body diameter - 80 mm - Length body diameter - 30 mm - Torque - 80 Nm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 1.91 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on shrink chuck, quantity = 1 piece ISO: C8-391.19-12 090 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (shrink fit) -metric: 10 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 12 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 90 mm - Body diameter - 24 mm - Length body diameter - 50.2 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.151 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on shrink chuck, quantity = 1 piece ISO: C8-391.19-25 100 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (shrink fit) -metric: 25 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 25 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 95 mm - Body diameter - 33 mm - Length body diameter - 56.5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.5 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - ISO 9766, quantity = 1 piece ISO: C8-391.27-32 090 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 32 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 32 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 61.5 mm - Functional length - 90 mm - Body diameter - 52 mm - Length body diameter - 53.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 30 Nm - Tool design - steel - Mass (weight) - 2.368 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.27-20 080 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (ISO9766 drill shank) -metric: 20 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 20 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 51.5 mm - Functional length - 80 mm - Body diameter - 36 mm - Length body diameter - 43.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.247 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity 1 piece ISO: C8-391.27-25 085 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (ISO9766 drill shank) -metric: 25 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 25 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 57.5 mm - Functional length - 85 mm - Body diameter - 45 mm - Length body diameter - 49.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 20 Nm - Tool design - steel - Mass (weight) - 2.315 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.27-16 080 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (ISO9766 drill shank) -metric: 16 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 16 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 49.5 mm - Functional length - 80 mm - Body diameter - 36 mm - Length body diameter - 42 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.24 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg