radial drill used for sale

bore capacity in steel (diameter): 35 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 40 spindle turning speed range: 115 - 1750 U/min : 560 mm : 175 mm table surface area: 1000 x 240 mm max. distance between table and spindle-nose: 375 mm connected load frequency: 400 V total power requirement: 0,85/1,5 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

two-arm drill, rotary drill, magnetic drill -Recording: MK1 -Nominal power input: 400 W -Connection: 230 volts -Max. drill bit diameter: 15 mm -Weight: 7 kg

Drill, rotary drill, magnetic drill, impact drill -Mounting: Drill chuck -Nominal power input: 500 W -Connection: 230 volts -Max. drill bit diameter: 16 mm -Transport case -Dimensions: 500/200/H110 mm -Weight: 9 kg

End mill, shank mill, milling cutter -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set -Weight: 12 kg

Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 10 kg

Wood step drill bits, wood drill bits, countersink bits, end mills, drill chucks, click-type quick-change chucks -for: row drilling machine, hardware drilling machine -from: a woodworking shop -15 kg: Milling cutters, drill bits, countersinks, click-type quick-change chucks

Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 17.75 mm -Usable length: 150 mm -Recording: MK2 -Type: HSSE Quantity: 19 pieces -Sale: only complete set -Weight: 6 kg

End mill, shank mill, milling cutter -Two-knife -Finishing cutter -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 3 mm -carbide-tipped Quantity: 8 pieces -Sale: only complete set -Weight: 4 kg

End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 32 mm -Usable length: 80 mm -Corner radius: 2 mm -Type: KHSS-E Quantity: 15 pieces -Sale: only complete set -Weight: 11 kg

2 Head Paper Drilling Machine

Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...

Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25

NUMBER OF SPINDLES 21 SPINDLE DISTANCE 32 MM DISTANCE BETWEEN FIRST AND LAST SPINDLE 640 MM DOWEL DRILL HEAD BY MAGGI MADE IN ITALY

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 16.8 mm -Usable length: 120 mm -Recording: MK2 Type: HSS -Quantity: 24 pieces -Sale: only complete set -Weight: 7.5 kg

Tool cabinet -with: spare parts for toolmaking, fixture construction -Various drill bushings: different sizes -various clamping elements -Dimensions: 670/300/H2000 mm -Weight: 200 kg

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A

two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling -SDS Plus: Recording -Transport case -Weight: 5 kg

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Single head Floor model with foot pedal heavy design adjustable side stops Several paper drills Drill holder 380 volts / 0.55 kW / 1.7 A

Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 2x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 33 mm -Dimensions: 100/80/H130 mm -Weight: 2 kg

End mill, shank mill, milling cutter -Six-cutter -Roughing end mill -Various: Diameter -Type: HSS -Quantity: 11 pieces -Sale: only complete set -Weight: 6 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Quantity: max. 1x drill bit -Recording: M8 -Dimensions: 80/80/H150 mm -Weight: 0.8 kg

Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

Boring power: 35 mm turning speeds: max. 810 U/min core drilling diameter max.: 35 mm tool taper: Weldon 19,05 mm bore stroke: 210 mm weight: 11 kg connected load frequency: 230 V engine output: 1,6 kW Dimensions (LxWxH): 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 4 mm -Type: STG-160 Quantity: 16 pieces -Sale: only complete set -Weight: 6.5 kg

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 16 mm -Usable length: 20 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 4 kg

End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm -Corner radius: 0.7 mm -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Drill bushings -10x Type: Z10W/36/15 -10x Type: Z10W/36/30 -9x Type: Z10W/36/10 -9x Type: Z10W/36/9 -10x Type: Z10W/36/14 Price: complete -Weight: 4 kg

Radius cutter, finger cutter, end mill, milling cutter -Six-cutter -Finish cutter -Shaft: Ø 25 mm -Diameter: 32 mm -Usable length: 70 mm -Angle: 60° -Type: HSS -Quantity: 4 pieces -Sale/Price: complete -Weight: 4 kg

bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.

Lot 525: Madra EDM Drilling Machine Late-Model EDM Drilling Machine This 2020 Madra BT-E is a highly efficient EDM hole drilling machine, engineered for rapid, precise start-hole creation in hardened metals and exotic alloys. Technical Details ‍ 1. Machine identification data Name: EDM Drilling Machine Manufacturer: Madra Model: BT-E Machine number: 191007 Year of manufacture: 2020 2. Operational parameters Travels (X / Y): 300 x 200 mm Travels (Z / W): 345 mm Electrode guide travel: 150 mm Table size: 460 x 210 mm Max. workpiece weight: 200 kg Distance between guide and table: 50 – 200 mm XYZ DRO resolution: 0.005 mm Max. machining current: 30 A Max. power consumption: 4 kVA Electrical connection: 3 x 400 V 3. Weights Machine weight: 550 kg 4. Dimensions Overall machine dimensions (Width x Length x Height): 800 x 800 x ...

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

Spindle speed infinitely variable electronic 40-4000 1/min Spindle: MK 2 Table height adjustment with rack Thread cutting performance max M12 Setting the thread cutting depth via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed / by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Mouth diameter 70 mm Usable table area (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg max distance spindle/table/foot 300/ 370/ 420 mm Motor AC with frequency converter 230 V , 0.54 kW OPTION Drilling package B16 (No. 296570) - Vice felix 80 - Quick-release drill chuck 1-13 mm Price: € 539,- Factory warranty: 3 years Free domicile including packaging (Germany only) Delivery time: immediately from ...