radial drill mas used for sale

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207629 Diameter: Ø 12.25 mm 420279013 K20 Holder: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207628 Diameter: Ø 10.25 mm 420279012 K20 Holder: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm

Internal Cooling Twist Drill DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) Diameter: Ø 18.25 mm Pickup: Ø 20 m New ! Dimensions: 200 x 20 x 20 mm

Twist drill bit with internal cooling DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) diameter: Ø 18.25 mm holder: Ø 20 m used, tested ! Dimensions: 200 x 20 x 20 mm

Twist drill HOMMEL HSS, DIN 345, Type N, ( HSS,DIN345,TypN, ) Diameter: Ø 32 mm 10510287 New ! Dimensions: 340 x 38 x 38 mm

Deep Hole Drills, Gun Drills with Internal Cooling GÜHRING ZL-TLB-1-R U ZFX 54,02 20 diameter: Ø 8.0 mm Total length: 700 mm groove length: 620 mm Shank diameter: Ø 25 mm Shank length: 80 mm New ! Dimensions: 700 x 25 x 25 mm

Drill Bit Insert FAHRION E34-MK1 4332163270553 inner cone MK1 New ! Dimensions: 87 x 46 x 46 mm

Deep hole drills, gundrilling drills with internal cooling PAGUS TBT Ø 10,000 15 x 480 ( TBTØ10,15x480 ) K15 C40 51/07 Diameter: Ø 10,15 mm Total length: 490 mm Groove length: 400 mm Shank diameter: Ø 16 mm Shaft length: 50 mm New ! Dimensions: 490 x 16 x 16 mm

Twist drill GARANT 11580 HSS ( 11580HSS) Diameter: Ø 29 mm New ! Dimensions: 580 x 30 x 30 mm

Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.5 x 17.0 mm solid carbide DK480UF shank: Ø 25 mm with internal cooling ! New ! Dimensions: 120 x 25 x 25 mm

Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm

Step drill bit with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm

Drill tailstock, deep hole drilling rig POREBA feed rate up to 1000 mm suitable for Poreba TPK-80 ! feed speed 1.2 to 100 mm/min with accessories ! used, tested ! weight: 930 kg ! Dimensions: 2400 x 1000 x 700 mm

Throughfeed Drilling Machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drilling units vertical / from below 2 x 2 drilling units horizontal / from left and right side

Two head paperdriller Make Hang Model 136DK Year 1990 Details 2 head paper driller with fixed 80 mm distance with tabulator Operation Electric footswitch Available Direct

Two head paperdriller Make Hang Model 136D Year 1970 Details 2 head paper driller with fixed 80 mm distance with tabulator Available Direct

Deep drilling machine SFT TBS200 for sale. Find more here - / Contact us at -

The INGERSOLL RAND TH60 drilling rig is a versatile and powerful machine designed for various drilling applications. It is built with robust construction, advanced technology, and a user-friendly interface, making it suitable for both onshore and offshore drilling operations. The rig offers high performance, reliability, and safety features to ensure efficient and productive drilling operations. Specifications: Water Well Rigs - 2002 international with Cat engine, 18 speed, new front tires . Rig is 1979 TH60 with 5x6 garner denver punp with new gear and pump end. 640" of new 89mm6.1m(20´) 12mm 2 3/8" IF rod, two new stabelizers, new murphy fast plug. Rig is direct hyd so no air over hydraulic. Less prob easy to fix! There is a portable pump to use due to highway weight regulations. Find more here - / Contact us at -

Radial drilling machine Commissioning on March 1st, 2023 Year of manufacture 2021 Fabr. WE KAMI Type: RKM5016 1 shift operation/5 day week To be delivered from: immediately Find more here - / Contact us at -

Manufacturer: KOVOSVIT Model : VO 50 Year of Manufacture: 1995 Condition: Used Weight (Kg): 4300 kg Find more here - / Contact us at -

Manufacturer: Peddinghaus Model: FDB 600 Type of Machine: Flat steel drilling and burning machine Find more here - / Contact us at -

Year of manufacture 1985 Paper Drilling Machine 4 drilling spindles Sliding table electr. Foot switch incl. base Price on request. We deliver and install worldwide!

bore capacity in steel St 60: 32 mm bore capacity in cast iron GG 20: 38 mm Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 tool taper: Kurzspindel MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 515 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 117 / 701 mm feed: von Hand spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,45/1,9 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 mm

Heavy Gear Drilling Machine Head height adjuster above hand crank Rotary tables from - rpm 4 feeds

Specifications: Manufacturer: Charmilles Type: HD 30CNC Year of Make: 2004 Travel: X 300 mm Y 200 mm Z 300 mm Bore diameter range: 0.3 – 3 mm Depth: max. 200 mm Tool table Table dimensions: 500 x 300 mm Workpiece weight: max. 300 kg Mains connection Power Supply: 3/PE-380 V Fluctuation range: +10%/-15% Input power: 4 kVA Dimensions and weight: Dimensions: 1,340 mm x 900 mm x 1,940 mm Weight: approx. 1,200 kg Condition Condition: Used Functional: Tested and fully functional

4 pieces new drill bits for double or quad drill dead drill machine, New, never used.

Key data: 50 mm, 800 1/min

Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition

4 hole paper drilling machine, with serial equipment and drill bits. In production ready condition. On pallet: 120 x 80 x 10 cm

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

heavy 40s Gillardon with cross table

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle diametre on front bearing160 mmSpindle bore102 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmWeight approx.3000 KgDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (40% DC)25,5 kWDrive power (100% DC)17 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10 touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ---------------------- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ---------------------- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ---------------------- 1 press-in station with dowel separation and press-in cylinder item 4 ---------------------- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the  ...

Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm