126,723 used machines on RESALE, but how to find them? Machine Search
number of heads: 1 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 10 mm serial no.: 14494 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm serial no.: 70010 Dimensions (L/W/H): 60x105x85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm serial no.: 526S130 number of spindles: 2 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x120 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 8 mm serial no.: 71479 dimensions of press (L x W x H): 185 x 110 x 80 cm bore depth: 70 mm Stack height: 50 mm voltage: 380 V frequency: 50 Hz weight: ca. 160 kg Electric capacity: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine No.: 311615 Type: U1 Volt: 380V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 310 kg
Machine No.: 306916 Type: U1 Combi Volts: 380 V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 760 kg
SPECIFICATIONS: Table dimension mm: 1600 x 500 Number of spindles: 21 + 3 (accessory head) Wheelbase between each spindle mm: 32 Max. drilling depth mm: 90 2 workpiece clamps Installed capacity: Hp 2.5 Pneumatic tilting device of the unit from above to the horizontal
Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy
bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 220 mm : 425 mm table surface area: 700 x 210 mm connected load frequency: V max. distance between table and spindle-nose: 470 mm total power requirement: 1,5 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,2 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan
Key data: 25 mm, 225 mm, 150 mm
Drilling capacity steel: ø 25 mm Table dimensions: ø 390 mm Spindle Adapter: MK3 Spindle speeds: 100 - 2900 rpm. Spindle stroke: 150 mm Projection: 225 mm Equipped with: - Drill protection -Drilling Country of origin: Netherlands Motor power: 0.75 kW Machine LxWxH: 700 x 700 x 1800 mm Machine weight: 300 kg
number of heads: 4 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm voltage: 220/380 V frequency: 50 Hz Dimensions (L/W/H): 100x70x150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)
Offer 23380 Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds in gear stages 95 - 2000 rpm - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height adjustable 340 x 320 mm - Table can be tilted left + right -Max. Distance table – drilling spindle 500 mm - Max distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm -Lighting - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg
Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t
- technically efficient, ready to work - after full service - 4-spindle - bumpers (right + left)
Key data: 30 mm
Specifications: Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 – 2240 rpm Spindle motor 1.1 / 1.6 kW Radius approx. 320 mm
Key data: 35 mm
New drill motor 230V - Part No. TB02752
NEW drill motor with MK3 mount. Performance data according to type plate. The machine comes from a spare parts warehouse.
NEW - TB08148-1 - Electronics 230V from spare parts warehouse.
NEW electronics 230V - TB09050-1 - from spare parts warehouse
NEW - Electronics 230V - from spare parts warehouse.
NEW - Electronics 230V from spare parts warehouse.
Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.
Inv. Num. : 7365 Type: B3N-6000 Producer: TBT Tiefbohrtechnik Created: 1991 Parameters: Control system: Siemens Maximum turning diameter: 8.5-63.5 mm Spindle power: 270 kW Bed length: 17000 mm Maximum drilling length: 8000 mm
Dowel drilling machine DORNBURG Type: DDBP incl. 5-fold gear drill chuck Rotatable drilling unit Support table height adjustable and swivel from -20° to +30°. Motor power 1.5 KW Pneumatic workpiece holder automatic pneumatic drill feed incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.
SPECIFICATIONS: Number of drill bits: 29 - Quick release Drilling distance mm: 32 Pneumatic operation Vertical/horizontal tilt: 0°-90° Installed capacity: KW 2.2 04 Workpiece clamping hounds With angle drill
Key data: 50 mm, 2000 1/min
Solid bench boring mill of the brand Stanko-Import, model 2H125 Stanko import Type: 2H125 Year of construction approx. 1975 massive rod drill with MK4 mount in good condition. Dimensions: L860 x W850 x H2400 Weight approx.: 1050 kg Motor 2,2Kw 380V Drilling depth gauge Automatic threading (RE-LI)up to M24 Drehz. 45 -2000 in 12 stages Feed 0.1-1.6 / Umdr.in 9 levels Projection 200mm Adjustment ranges: quill stroke 280mm Drill head 170mm Table 270mm, 400x400 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.
Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce
Key data: 40 mm, 315 mm, 200 mm
Solid column drilling machine of the brand WMW, model BS 25 B Mk4 Ready to use. Technically flawless Machine Type: Column Drilling Machine Make: WMW Saalfeld Type: BS 25 B Year of construction: 1962 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2.250,00 net Technical details Drilling performance in steel (diameter): 6 - 40 mm Projection: 315 mm Drilling stroke: 200 mm Headstock adjustment: 280 mm Spindle speeds - infinitely variable: 63...1000 rpm Spindle mount MK: MK 4 Feed: 0.08...1.2 rpm Clamping surface table L x W: 700 x 600 mm Clamping surface of the base plate: 440 x 490 mm Distance Spindle / Base Plate: 1100 mm Total Power Requirement: 2.61 kW Machine weight approx.: 1000 kg Dimensions machine approx. LxWxH: L:1010 x 700 x 235 ...
Solid column drilling machine of the brand Webo, model E 18 massive rod drill with MK mount in good condition. Otherwise technically flawless. Speed 265-2100 rpm-1 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder. Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!
Key data: 16 mm, 275 mm, 160 mm
Solid Inratirea Column Drilling Machine, Type G-16 Ready to use. technically flawless, except for the cover of the motor fan (Replacement can be provided with purchase) Details: Machine Type: Column Drilling Machine Make: Infratirea Type: G16 Year of construction: 1975 Control Type: Conventional Country of origin: Romania Freight base: from the Neubrandenburg location, freely loaded Location: 17034 Neubrandenburg Price: € 1650,00 net Technical details Drilling capacity in steel (diameter): 16 mm Projection: 275 mm Drilling stroke: 160 mm Spindle speeds - infinitely variable: 150 - 2360 / 9 step rpm Spindle holder MK: 3 Distance spindle/table max.: max: 580 / min: 100 mm Feed rate: 0.10 - 0.16 - 0.25 - 0.40 mm/rev Table clamping surface: 300 x 400 mm Table adjustable: vertical 360 mm Table swivel approx.: rotatable 360° Clamping surface of the base p ...
Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)
Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg
SPECIFICATIONS: Number of drill bits: 35 Drilling distance mm: 32 Vertical/horizontal swivel Installed capacity KW: 2,8 Quick release Pneumatic operation
From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts
Stegher FD Dowel Drill Brand: Stegher Type: FD Year of construction: 1995 M-No.: 35/12951 Control: Alfa-numeric, with pre-programmed drill cartridges Longitudinal and strin-side bores Length stops: Left and right digital stops for longitudinal drilling Lugs for left and right side holes with turret positioning Dowel dimensions: 6-16 mm Drilling depth: 80 mm Motor: 2.2 KW Compressed air: 6 bar Suction: ø80 mm
20-75- CNC router WOODLAND MACHINERY (new) Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg The price is 23100 Eur
Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement ...
Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder
Cleaned & Checked Model 54S Number of heads: 1 Maximum stack height (mm) 50 Tabletop model Power supply (V) single or three-phase Power 220V=1.05A / 380V=0.6A W x D x H (cm) 80 x 54 x 73 Weight, net (kg) 30
SPECIFICATIONS: Number of drill bits: 35 (1/2 right - 1/2 left) Drilling distance mm: 32 Table width mm: 1250 03 Clamping jacks Installed capacity KW: 3.0 Electrical/pneumatic operation
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm Column drilling machine with: Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CAMAM MO-4A double-sided oscillating drill Number of spindles per page 3 Tool mounting bracket basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Two pneumatic material clamps per side
Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40 ...
Key data: 63 1/min, 25 mm, 200 mm
Manufacturer: WMW Type: BKR 25 x 4 AI Stock number: 1023 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 25 mm Morse taper of spindle: MK 4 Connected load: 10.2 kW Weight: 3000 kg
Inv. Num. : 7576 Type: WI 130 Producer: ŠKODA Created: 1969 GO 2008 Parameters: Control system: Heidenhain iTNC 530 Work table length: 2000 mm Work table width: 1800 mm X-axis travel: 1900 mm Y-axis travel: 1980 mm Travel travel Z-axis: 1250 mm
maximum number of results exceeded
please refine your search
