radial drill mas used for sale

Unused

x-travel: 3.000 mm y-travel: 2.500 mm z-travel: 2.475 mm w-axis: 800 mm rotary table: Juaristi MG-12 Rotary table surface: 2.000 x 2.500 mm T-slots: 11 T-slot - width: 170 mm table weight: 8.000 Kg table rotation: B- Achse – 0,001 ° Control: HEIDENHAIN i TNC-530 diameter of quill: 130 mm speed: 3.000 U/min tool taper: ISO 50 DIN 69871/1-B milling head: swivelling +/-: 2,5/2,5 Grad spindle drive: 30 kW transmission ratio: 2 speeds:: 0-2.500 U/min boring spindle: D`ANDREA UT5-800-S mm/min diameter: 800 mm cross travel: 250 mm Tools changer: 30 pos. Internal cooling system: 20 bar Chip coveyor: Inkl. handwheel: HEIDENHAIN HR-420 weight of the machine ca.: 45 t dimensions of the machine ca.: 9800 x 7320 x 5500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platfo ...

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 30 - 400 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE m ...

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

Key data: 130 mm, 3000 mm, 2000 mm

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

Ref. -No.: 10361 Manufacturer: SCHIESS Year of construction: 2023 Type of control: CNC Control: Siemens, Heidenhain, Fanuc - Configurable as required Storage location: Halberstadt Country of origin: Germany financing: nach Anfrage Support sleeve diameter: 130 mm X-Travel: 3000 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Spindle stroke: 800 mm B-Axis: 360 ° W-Axis: 800 mm Spindle Taper: SK50 Max. Tool Weight: 25 kg Clamping Area: 1250 x 1250 (or configurable as required) mm T - groove width: 22 mm T - slot spacing: 160 mm Swivelling: Configurable as required ° Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPM Max. Torque: 2500 Nm Drive Capacity - Spindle Motor: 41 kW

Ref. -No.: 10142 Manufacturer: TIBO Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

Ref. -No.: 10120 Manufacturer: BRIERLEY Storage location: Halberstadt Country of origin: Deutschland Workspace: 2,5- 32 mm

S. No.: 238828

Drilling diameter 3-25 mm in ELB Drilling depth in one stroke (mm) 810 with resetting 1,200 Tapping up to M20 – larger by milling Manual tool changer Spindle holder SK 40 altv. HSK 63 Drive power 5.5 kW / ED 100 Travel X (longitudinal) 1,050 mm Travel Y (vertical) 800 mm Table load up to 2,500kg Table size 1,000 x 1,500 mm CNC rotary table 0-360° manual

Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused

Machine only

Tables can be adjusted at an angle.

Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused

Equipped with Bosch drill. Please note! Defectively according to the specification.

Unused, handbook available

Drill vise Jaw width 140 mm Clamping range 140 mm Clamping height 50 mm Weight 17 kg Dimensions L x W x H 500 x 290 x 90 mm Condition: never used / new (5)

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Machine number: 133979 Speed range: 900 - 10,000 rpm Table dimensions: approx. 200 x 200 mm

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Max Drilling diameter : 46 mm Max Drilling depth: 1000 mm Table dimensions: 1200 x 700 mm x mm Spindle speed 4000 rpm Spindle power: 7.5 kw

Unused, handbook available

Weibert SB 4132SM Box column drill Technical Specification Motor power - W 1500/2200 400V Drilling capacity in mm 32 Spindle stroke in mm 120 Drilling spindle holder MK4 / MT4 Drilling spindle speed in min-1 (24) 60-3480 Column diameter in mm 90 / 2.5 Gross weight in kg 125 GMHM SB4132SM

Machine No.: 405823 Drilling capacity: D25 mm Projection: 255 mm Drilling depth: 135 mm Tool holder: MK3 Engine power: 0.65 / 0.9 kW Speeds: 8 / 105 – 2900 rpm Table: 500x400 mm Weight: 180 kg

Unused, handbook available

Radial Drilling WAGNER type PRC 35 Spindle CM4 Spindle exit: 220 mm Spindle speed: from 32 to 2500 RPM Arm/trolley travel: 700 mm Year of construction: 1989 Column diameter: Ø 230 mm Max height table/spindle nose: 1000 mm (table in high position) Automatic descent Hydraulic locking of the column rotation + trolley Mechanical locking of the up/down Cube dimensions: L 800 x W 450 x H 450 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 900 x 2250 mm in high position Weight: approx 2 T

with 3 vices, drilling capacity in steel (diameter) 40 mm Projection 345 mm Drilling stroke 200 mm Table clamping area 720 x 560 mm Speed 60 - 765 rpm Feed rate 0.15 - 0.2 - 0.3 - 0.36 mm/rev Tool holder MK 4 Total power requirement 3.0 kW

Various sizes and designs, see pictures, approx. 18 pieces.

Machine number: 15212 Speed: 125 to 3000 rpm Drilling depth: 160 mm Table dimensions: 400 x 300 mm with two grooves

equipped with automatic cooling system; unused; in suitcase; 5637

Type MX5116T+ V-380 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 466 kg Price 3060 Eur (EXW Jonava, Lithuania)

number of heads: 2 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 20 mm serial no.: 26332 voltage: 280/220 V Dimensions (L/W/H): 80x120x170 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 4 mm drilling capacity diameter max.: 12 mm serial no.: 26214 dimensions of press (L x W x H): 64 x 102 x 105 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DRILLING MACHINE Inv. No. 12.973N1 Make ERLO Model SE25 Drill of benchtop manual feed • Feed manual • Transmission gears • Column diameter: 100 mm • Distance from spindle to column: 250 mm • Fixed table, moveable and rotating bit • Drilling capacity: ⌀ 25-30 mm • Tapping capacity: M 22-25 • Spindle cone: CM 3 • Engine power: 1.1/1.6 | 1.5/1.9 HP • Num. and selections of speeds: (8) 65 – 3060 rpm • Drilling depth: 120 mm • Weight: 200 kg • Measurements: 560x380x935 mm • Cooling equipment • Light equipment

Unused

number of heads: 1 drilling capacity diameter min.: 4 mm drilling capacity diameter max.: 12 mm serial no.: number of spindles: 1 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x90 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 15 mm serial no.: 230 spindle distance: 45 - 120 mm bore depth: 50 mm Hole distance: 3/380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various sizes and designs, see pictures.

number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 1 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 10 mm serial no.: 14494 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm serial no.: 70010 Dimensions (L/W/H): 60x105x85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various sizes and designs, see pictures.

number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm serial no.: 526S130 number of spindles: 2 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x120 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging