radial drill mas used for sale

Hot runner controller - Mold Masters M1-24-24 / Like new Year of Make: 2019 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60 mm / MK5 arm length: 1600 mm quill stroke: 310 mm spindle speed:: 28...2500 U / min table-size: 1470 x 986 mm total power requirement: 4 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

Manufacturer: P.E. Labellers Model: MASTER M.S. Type: 12T-770/4S-4E Year of Manufacture: 2007 Electrical Specifications: - Voltage: 400 V - Phases: 3 - Current: 11 A - Power: 6 kW - Frequency: 50 Hz Pneumatic Specifications: - Air Consumption: 30 L/min - Air Pressure: 5 bar Weight: 2200 kg CE Certified Y271010885 can manage a bottle height range from 120 to 400 mm - The range of bottle Ø goes from 30 to 120. - For the label length, this machine can apply labels that cover max 180° of the bottle. - The adhesive stations have a size of 200 H. - The machine is predisposed for the mechanical centering via bottom notch. - Max velocity of the machine is 8000 B/H. Find more here - / Contact us at -

Used Stone Paver Manufacturer: Masa – Henke Year of Make: 2000 Condition: very good Only the stone paver is for sale, no circulation, boards, etc. Location: Italy Used block making machine Manufacturer: Masa - Henke Year built: 2000 Condition: very good Only the block making machine is for sale, no cycle, boards, etc. Location: Italy

Perfect binder Master e Connecting bridge Speed: 1,000 - 6,500 cycles/hour Dedusting station with suction nozzle Output max.: 1,000 - 6,500 cycles/hour Product height: 140 - 435 mm Document width: 75 - 370 mm Speed (inline): 1,000 - 8,000 cycles/hour Gathering machine Sprinter 7010 (16 stations) 16 gathering stations Control: PLC Heavy Duty Back Machining Tool 18 brackets Furniture for small format Pressure station Electronic double-sheet inspection Product width: 105 - 320 mm Min. paper weight: 70 g/m² Fault sheet inspection Main milling machine Folding station Creasing station Cross-stack delivery Product thickness: 2 - 62 mm Manual docking station Max. layer thickness: 3 mm Clamp opening: 12 - 90 mm Hot Melt Back Tying Station PUR back binding Hot Melt Side Binding Station Envelope feeder 2 pressure stations

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - / Contact us at -

TPG Hypoid Gearmotor FV35-750-30 0.75kw, Ratio: 30, Shaft: 35mm

Colchester Univ. Lathe Master 2500 Center height 180 mm Center width 600 mm Bore (passage) 40 mm RSF 2-Axis Digital Display Type Z-550 incl. accessories

Inv. Num. : 8518 Type: MasterCut Compact 60 Producer: MicroStep Created: 2017 Parameters: Control System: iMSNC Software: AsperWin Basic (2017) Switch-on hours: 17000 h Operating hours: 8800 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Formica ForCut 203A KPA Machine height: 2030 mm Machine length: 8100 mm Machine width: 2800 mm Machine weight: 5140 kg Equipment: Technical documentation

Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker

Hot runner controller - Mold Masters M1-24-24 Year of Make: 2016 Location: Lodz, Poland Description: 24 hot zones with cabling All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and man ...

bore capacity in steel (diameter): 60 mm Center of spindle to wall or column: min./max. 320 - 160 mm spindle turning speed range: 20 - 2.500 U/min quill stroke: 310 mm total power requirement: 4 kW weight of the machine ca.: 4.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network connecti ...

STEIN Maschinenbau Profile Guillotine PT1-200 For glazing beads, small profiles, main profiles and technical profiles Max. cutting width: 190 mm, max. cutting height: 120 mm Extrusion speed: up to max. 10 m/min Blade length: 600 mm Length accuracy: +/- 2 mm Knife stroke: 180 mm Cutting speed infinitely variable Pneumatic quick-change device for knives Hold-down device pneumatic Knives are preheated: 80ºC - 160ºC Cycle time: 1.5 to 4 sec. adjustable on the display Infeed side: unit for applying a protective film to the profile Control: Compact PLC Siemens S7-613C Dimensions: Height: approx. 1,900 mm, extrusion height: 1,100 mm (+/- 50 mm height adjustment) Footprint: approx. 1,450 x 800 mm (without inlet and outlet tunnel) Condition: very good, ready for use

A vertical glass storage cabinet TMB with integrated lighting for inspecting glass sheets is available. Load capacity: 2000kg, machine dimensions X/Y/Z: approx. 6550mm/1250mm/3600mm, weight: approx. 1750kg. The lighting may need to be checked and possibly replaced. An on-site inspection is possible.

Converting Line GM 330 FB-D (Hot stamp + Screen print) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Max. web width: 350 mm Min. web width: 50 mm Unwind diameter: max. 700 mm Rewind diameter: max. 600 mm - Vetaphone Corona - BST web edge control Hot foil stamping unit (flatbed) Speed: 6,000 stamps/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with a diameter of 250 mm Substrates: 50-500 μm Board thickness: 5-10 mm; 7 mm is standard Plate pressure: 30 tons Foil feed in transverse and longitudinal directions (rotating tower) Temperature range 80°-130° C Heat-up time approx. 20 min. Screen printing unit Speed 4000 print runs/h or 5-15 m/min. Web width 110 mm - 330 mm Frame size 660 mm x 500 mm Frame type 30 mm x 30 mm aluminum frame Printing area 330 mm (length) x 330 mm (width), Manufacturer: Grafisk Maskinfabrik, Substrates: 50-500 um

Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of construction: 1960 Table size: 50 x 70 cm With inking unit: 3 ink application rollers Front marks and side marks Weight: 530 KG Tested and printed Ref. 509 Proof press KORREX Hannover Max Simmel, Maschinenfabrik Ma.: No. 421352 / Year of manufacture: 1960 Table size: 50 x 70 cm With inking unit: 3 ink ink rollers Front lay marks and side lay mark Weight: 530 KG Checked and test printed

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

Paving stone system MASA RECORD 9001 VB with compl. Mixing plant Paving stone plant and finger crane S7, packing line Rekers plc, rest of wet & dry line S5, board size: 1450 x 1100 x 40 mm, Number of boards + - 5000 pieces & 5 molds, max. product height: 14 cm paving stones without the need to adjust the lift/lowering buffer and finger crane. Curbstones up to 1 m in length and 30 cm height can be held between the fingers without adjustment. Board stacks: 1800 boards. 28 boards per stack Curing chamber: Rotho, freestanding Mixing plant: MASA control system Paint mixer: MASA HM 500/750 Main Mixer: Masa HM 2000/3000 Cement silos: 3 silos of 90 m³ and silos of 40 m³ Output per 8 hours: 2000 m² standard paving stones 10.5 x x21 x 8 cm

GRAEF MASTER 3370 Specifications: 400 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.

turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake  ...

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake functi ...

turning length: 1000 mm turning diameter: 360 mm swing diameter over bed slide: 220 mm turning dia. in gap: 502 mm spindle bore: 52,0 mm turning speeds: 70 - 2.000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 3 MK quill travel: 100 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1825 x 750 x 1600 mm Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gear ...

Inv. Num. : 8638 Type: SPU 20 Producer: MAS Created: 1995 Parameters: Control system: Siemens Maximum turning length: 700 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 380 mm

Cliché montage device Age 2015 Cliché mounting device

: 0554 mm : 370 mm : 2000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: König Maschinen Gessellschaft m.b.h. Austria Type: KGV Combi 2000 / 40, ( DD ) – RR 800- K5-SA5- SP5-FS-VO-MO (WB) 800-ABI 800 Year of manufacture: 2001 Control panel: Siemens Simatic The plant is controlled by a control panel with visual display Electricity: 3 x 400 V, 50 Hz, 13.5 kW Dimensions: Total length 11 meters The line is intended for the continuous production of weighed dough pieces which are automatically transferred from the main machine. ( Rex Automat ) The machine offers the following functions: - Rex automatic weighing and reception of the kneaded dough pieces. - Proofing in controlled air conditioning - Shaping of dough pieces, e.g. long rolling - Cutting of dough pieces - Flouring of dough pieces - Patterning of dough pieces - Seeding of dough pieces, e.g. sesame seeds, poppy seeds, sunflower seeds, etc. - Transfer of dough pieces to  ...

Mandrel tube bending machine Fabr. LONG Type EL 45 Specifications: for pipe diameters 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s electr. Connection 380 V, 2.2 kW Weight approx. 1000 kg with tools: 16 x R 76 22 x R 76 28 x R 75 35 x R 105

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

Sänger & Massierer log infeed system

feed pressure: 1,5 / 1 / 0,5 bar liter capacity: 380 / 660 / 820 l total power requirement: 2,5 / 3 kW weight of the machine ca.: 60 kg dimensions of the machine ca.: 0,62 x 0,39 x 0,46 m Package price for 10 items: 2,800,-- EUR bulk purchase negotiable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of Make: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with power source Kjellberg HiFocus 280i TEKA filter system

punkt-zu-punkt-Bohrmaschine mit numerischer Steuerung MASTERWOOD SPEEDY 207 für die kundenspezifische Möbelherstellung, Küchenmöbel, Badezimmermöbel und verschiedene Prozesse bohrkopf mit 5 unabhängigen vertikalen Spannfuttern und 1 doppeltem horizontalem Spannfutter säge für Längsschnitte maschinentisch mit 1390 x 750 mm Bohrkapazität und zwei seitlichen Hochfahranschlägen, die von der Steuereinheit gesteuert werden, um mit nur einem Programm und einem Zwischenhalt platten bis zu einer Größe von 2800 x 750 mm auszuführen möglichkeit zum Bohren von 2800-mm-Platten pneumatische Werkzeugverschiebung mm 60 max. plattendicke mm 50 drehzahl der spindeln U/min 4500 sägerotation U/min 6000 vakuumpumpenmotor PS 1.5 Saugnapfdurchmesser mm 80 frontanschlag komplett mit 4 Schließzylindern zum Bohren schmaler Werkstücke und Leisten multitasking-steuerung komplett m ...

SPECIFICATIONS: Work table size: 1000 x 310 mm Working depth: 130 mm Longitudinal stroke of the work table: 400 mm Transverse stroke of the work table: 150 mm Installed power: 2.95 kW EQUIPMENT: 02 Workpiece stop guides Accessories

Aufschnittmaschine / Slicer GRAEF MASTER 3020 Specifications: 230 Volt / 50 Hz / 2.2 A / 500 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 300 mm Stainless steel knife incl. grinder Luminous flux Machine with CERA 3 coating Weight: 37 kg External dimensions (L/W/H): 500 x 600 x 420 mm Cutting size: L 260 x H 195 mm Cutting thickness 0 – 24 mm Carriage dimensions: L 260 x W 300 mm Installation area: L 540 x W 440 mm External dimensions: L 600 x W 570 x H 420 mm Working area: L 680 x W 720 x H 570 mm Knife speed: 230 rpm with weighing function up to 0 - 5,000 g (not legal-for-trade) Year of manufacture: 2018 Function checked, machine ready for immediate use! RRP: EUR 5,057.50 Condition, see original pictures! If you have any questions, email or call.

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Slicing speed: up to 70 pieces per minute Description The thickness of the bread slice is 15 mm easily replaceable blade system 1783

For sale: a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measuring system for automated quality control of optical components such as wafers, sensors or micro-optics., This machine was developed for the precise mass testing of optical components and offers the highest measurement accuracy, reliability, and flexibility in industrial applications. Its modular design allows the tester to be perfectly adapted to individual production or development requirements., Features & Equipment, • Integrated laser module (940 nm, circularly polarized) for precise optical illumination, • High-resolution camera with automatic calibration and large field of view, • Robot-based wafer handling (EFEM) for automated loading and unloading, • Analysis software for evaluating efficiency, contrast, uniformity, and performance, • CE certified, including ...

General SKU437W1439 LocationBarneveld MakeMKS TypeCirrus 2 Main Features Motor0.6 KW Specified Features - Miscellaneous CapacityOven temp 180°C Motor600 watts, 230 volt Information Mach.No.LM118-0114010636B Floor space0,645x0,41 m CEcheck Total height0,35 m Weight35 kg Extra SpecificationsAtmospheric pressure gas monitoring : Features &: Benefits • Monitors multiple gas species over a wide dynamic range of composition at : atmospheric pressure • Compact, modular design for ease of serviceability and maintenance • Direct Ethernet interface - fully network compatible • Recipe driven Process Eye™ : Professional software for automated : operation and calibration : • Fast response, silica capillary inlet heated to 150°C For sampling different gas conditions, : inlet options available are: • Stainless steel capillary • Low flow capillaries • Multi-str ...