126,662 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 32,0 mm throat: 230 mm bore stroke: 120 mm morse taper: 3 MK table:: 400x320 mm turning speeds: 105 - 1725 U/min total power requirement: 1,2 kW weight: 245 kg range L-W-H: 470x810x1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover The data for this ad w ...
bore capacity in steel (diameter): 50.0 mm throat: 300 mm bore stroke: 160 mm threading: M 30 turning speeds: 100 - 1600 U/min table:: 615 x 430 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 145 mm feed: 0.1-0.2-0.3-0.4 mm/U distance spindle /table: 147 / 688 mm engine output: 1.8 / 2.9 kW weight: 450 kg Machine height: 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device A pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED dis ...
bore capacity in steel (diameter): 25.0 mm throat: 255 mm bore stroke: 120 mm morse taper: 3 MK turning speeds: 105 - 2900 U/min table:: 395 x 420 mm column diameter: 100 mm threading: max. M10 voltage: 400 / 50 Hz V weight: 140 kg range L-W-H: 500 x 570 x 1100 mm Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40.0 mm bore capacity in cast iron: 50.0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm threading: 24 in ST M threading: 30 in GG M turning speeds: 100 - 1.800 U/min feed: 0.1-0.2-0.3-0.4 mm/U distance spindle /table: 147 / 688 mm total power requirement: 0.6 / 1.8 kW weight: 470 kg height of the machine: 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class F (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thre ...
bore capacity in steel (diameter): 55.0 mm threading: M 30 / M 42 throat: 300 mm bore stroke: 140 mm turning speeds: 70 - 1200 U/min table:: 615 x 430 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 145 mm feed: 0.10 + 0.30 mm/U distance spindle /table: 150 / 735 mm weight: 380 kg Machine height: 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications - Clamping surface (left-right): 370 mm - Clamping surface (front-rear): 614 mm - Control: electronic control - Quill stroke: 180 mm - Speed range up to: 55 - 5000 rpm - Projection: 320 mm - Tool holder: MK 4 - Connected voltage: 400 V - Total height approx.: 2.06 m -Documentation - Weight approx.: 600 kg
Specifications - Clamping surface (left-right): 390 mm - Clamping surface (front-rear): 420 mm - Control: electronic control - Quill stroke: 120 mm - Speed range up to: 7500 rpm - Tool holder: MK 3 - Connected voltage: 400 V - Mains frequency: 50 Hz - Total height approx.: 1.90 m -Documentation - Weight approx.: 400 kg
MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...
Key data: 100 mm, 1600 mm, 1120 mm
Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle holder ... ISO 50. Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight ... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power.
Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm
Inv. Num. : 8763 Type: WH 10 NC Producer: TOS Created: 1987 Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1150 mm Y-axis travel: 1000 mm Z-axis travel: 600 mm Spindle diameter: 100 mm
Inv. Num. : 8764 Type: WH 10 NC Producer: TOS Created: 1967 Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1150 mm Y-axis travel: 100 mm Z-axis travel: 600 mm Spindle diameter: 100 mm
COLOGNE L2 YOC 1992 Rated current: 3.2 A (380V) 2 speeds (1,500 + 3,000 rpm) 2-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Drilling length: 200 mm Height adjustment by handwheel: 120 mm Altitude display via dial gauge in the handwheel Tischgr. 350 x 820 mm Keyless chuck 2 pneumatic workpiece clamps (safety clamping cylinders) Mitre stop (adjustable up to 60° on both sides) 90° plug-in stop Chassis Weight: 220 kg Manufacturer
Earth drill suitable for 8 - 22 t excavators
The Besana CMB 70/2TC glass drill is an industrial double-sided drill for glass processing. Here are the key specifications I found for you: Technical Specifications Type : Besana CMB 70/2TC Drill table dimensions : 950 x 950 mm Throat depth : 1200 mm Number of speeds : 4 adjustable speeds per drill head Dimensions (L x D x H) : 3000 x 2550 x 1800 mm Power : 3 kW, 380V – 50 Hz – 3F+N+PE Weight : 750 kg Application This machine is suitable for: Double-sided drilling in glass plates Precision machining in the flat glass industry If you are looking for a machine for professional use in glass processing, this model is a solid choice. 04.1.204
Inv. Num. : 8800 Type: WH 63 Producer: TOS Created: 1978 Parameters: Work table length: 800 mm Work table width: 800 mm Spindle diameter: 63 mm Machine weight: 7600 kg
EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...
Open-face drilling machine from Schmidt Kranz & Co GmbH, Reliable German quality, This open-face drilling machine is designed for drilling with the Open-Front Technique, also known as auger drilling. This is a trenchless drilling technique. Trenchless drilling minimizes the impact on the environment and allows work to be carried out under existing structures without excavation., This machine can be used for a wide range of underground infrastructure applications where trenchless construction is required., • Brand: Schmidt, • Type: Open-face drilling machine, • Condition: Very well maintained, • Ready for immediate use, , Accessories, 57 pcs. Casing pipe with internal diameter Ø 350 mm, length 1000 mm, 29 pcs. Auger plus head: 1 MTR Ø 320 mm, 7 pcs. Auger: 1 MTR Ø 350 mm + clamp, 50 pcs. Casing pipe with internal diameter Ø 260 mm, length 1000 mm, 6 pcs. Auger: Ø 240 mm, 37 p ...
Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg
taper MK: 4 feeds:: ja weight of the machine ca.: 1,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FPT SIRIO-M Control: Heidenhain TNC 426 C Serial Number: LM0498020 Machine number: 1710799 CNC milling head automatically swivelling infinitely variable Spindle: ISO 50, 50 kW, up to 3000 rpm Hydrostatic Guides Travel (X/Y/Z): 4000 / 1200 / 2000 mm Table size: 5000 x 2000 mm Tool changer: 30-fold ATC (automatic)
Key data: 100 mm, 1600 mm, 1120 mm
Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power in our warehouse.
Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T
spindle turning speed range: 750/1500 U/min total power requirement: 2,5 kW turning speeds: 750-1500 U/min thread cutting attachment: tool adaptor: MK4 table surface area: 320x240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 300 mm bore stroke: 200 mm spindle taper: MK 4 spindle turning speed range: 55 - 600 U/min table diameter: 500 mm column diameter: 180 mm feeds: 0,07/0,11/0,16/0,22 mm/U total power requirement: 1,47 / 1,84 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1,3 x 0,65 x 2,17 m Condition: ready for operation: Electric 380 Volt: Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price! Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): mm throat: mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TOYOSK 01C 550II-TMS Fixed Spindle Pitch 48 Spindle Tapping Machine Manufacturer: TOYOSK Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Spindle speed: 430, 710, 1030 Power: 1.5kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)
TOYOSK 01C 550II-TMS Fixed Spindle Pitch 48 Spindle Tapping Machine Manufacturer: TOYOSK Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Spindle speed: 430, 710, 1030 Power: 1.5kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)
bore capacity in steel (diameter): 18 / 23 mm bore depth: 100 mm throat: 240 mm Spindle Speed: 250 - 4000 U/min. table surface area: 340 x 280 mm machine weight ab.: 205 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plate boring mill X/Y/Z 13200/3200/1400, built approx. 2010, rebuilt 2016 Siemens Sinumeric 840D with Siemens drives + Heidenhain linear measuring systems. Linear motors in X with cooling unit Delta Therm, Y/Z ball screw Control cabinet air-conditioned with Pfannenberg cooling unit Hydr. Weight compensation, manually adjustable swivel head SK50 Panel field approx. 12000x3500 With UNION rotary table 2000x1800, adjustment range 1250mm + various clamping angle accessories.
Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...
diameter: 42 - 80 mm length: 350 - 520 mm tool adaptor: MK4, MK5, MK6 12 twist drills, also available individually: 1 MK6, diameter 80 mm EUR 150.00 1 MK5, diameter 70 mm EUR 90.00 2 MK5, diameter 60 mm EUR 60.00 each 3 MK5, diameter 55 mm EUR 55.00 each 2 MK5, diameter 50 mm EUR 55.00 each 1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 plus VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical Drilling and Milling Center Brother TC-22A with 4th Axis Year of Make: 1999 Control: Brother Technical data: Spindle speed: max. 12,000 rpm Tool holder: BT 30 Number of magazine slots: 26 Travels: X-axis: 500mm Y-axis: 400m Z-axis: 410mm 4th axis: 0.001° Accessories: Nikken Rotary Table Base plate zero point clamping system We have 2 identical machines in stock.
Key data: 100 mm, 1600 mm, 1120 mm
Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.
Dowel and slotted hole drilling machine GANNOMAT JUNIOR 320 LBM very good condition, as good as new, the machine comes from a very small carpenter's shop and was used there very little the machine is in its original condition, it has only been cleaned, the paint has not been touched up this allows slotted holes to be milled and dowel holes to be drilled on 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1993 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible t ...
Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0. Schnellspanner DIN 6348 - Gr 0. Für Fräsmaschine, Tisch-Säulenbohrmaschine. Bohrung: 5mm
column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg
Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...
Inv. Num. : 8987 Type: WD 130 Producer: TOS Generated: Parameters: Maximum spindle speed: 2000 1/min X-axis travel: 6400 mm Y-axis travel: 2500 mm Z-axis travel: 430 mm Without a table.
Slotted Hole Drilling Machine Panhans Type 116 Year of manufacture 1997 With dowel device Two-jaw drill chuck 1-20 mm Table fixed, drilling support movable 1 eccentric clamp on the table Table size 700 mm x 380 mm Maximum drilling depth 145 mm Maximum elongated hole length 240 mm Height travel 135 mm Motor power 1.5 kW Speed 3000 rpm. Weight approx. 200 kg
Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...
Inv. Num. : 8972 Type: WD 130 A Producer: TOS Created: 1996 Parameters: Work table length: 2200 mm Work table width: 2200 mm X-axis travel: 4700 mm Y-axis travel: 1755 mm Travel distances Z-axis: 1100 mm Machine weight: 27 t
Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - / Contact us at -
Key data: 90 mm, 1250 mm, 900 mm
Inv. Num. : 9038 Type: W 9 Producer: TOS Generated: Parameters: Work table length: 950 mm Work table width: 950 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Equipment: DRO (3 axes) Rear support column Clamping angle Tools
Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen
Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, Spiral drill bit Ø 148.5 mm/H7 -Recording: SK50 -Tool: double-edged -Dimensions: Ø 148.5 x 630 mm -Weight: 16.5 kg
Jig boring mill, fine boring mill, plate boring mill, bench boring mill, boring mill, milling machine, row drilling machine, multi-spindle head, drill, drilling tool, reamers, quick-change tapping chucks -Extensive range of tools: for drilling/reaming/thread cutting -Content: see pictures -Tool cabinet: 7 drawers -Dimensions: 720/720/H1000 mm -Weight: 454 kg
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 3x drill -Admission: M8 -right/left: rotating alternately -Distance drill: 25 mm, offset (see photo) -Number: 3 drill heads available -Price: per piece -Dimensions: 90/85/H70 mm -Weight: 1.6 kg/piece
Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg
Bench drill, bench drill, column drill, pillar drill -Manufacturer: Ixion, bench drill type BT 6 -Clamping table: 290 x 225 mm -Travel: 150 mm -Spindle mount: drill chuck -Projection: 180 mm -Speeds: 1080 - 12000 rpm 8 levels -Column: diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Motor: AEG 0.37 / 0.6 kW -Voltage: 380V -Dimensions: 640/330 / H740 mm -Weight: 92 kg
maximum number of results exceeded
please refine your search
