radial drill machine used for sale

Diamond Core Bit, Core Drill Bit HILTI DD-BI 25/280 RC ( DD-BI25/280RC ) 250900 / 8 Ø 25 mm Depth: 280 mm New ! Dimensions(Package): 350 x 40 x 40 mm

Drilling Machine, High Frequency Tool, High Frequency Machines FINE ASs 848-1 0.75 KW 540 rpm 200 V 300 Hz with 2 - gear gearbox and direction changeover ! used, tested ! Dimensions: 470 x 230 x 90 mm

Morse taper / drill chuck holder PAGUS MK5

Drilling Machine, High Frequency Tool, High Frequency Machines FINE DS 848 0.75 KW 420 rpm 200 V 300 Hz with 2 - speed gearbox ! untested ! Dimensions: 480 x 230 x 90 mm

Drill tailstock, deep hole drilling rig POREBA feed up to 900 mm support: bed center to wedge center 400 mm weight: 780 kg ! used ! Dimensions: 2000 x 1200 x 1400 mm

Drill, high-frequency tool, high-frequency machines FEIN ASz 848c 0.75 KW 1230 rpm 200 V 300 Hz connection cable approx. 9 m used, tested ! Dimensions: 470 x 300 x 130 mm

Twist drill WMW-WERKÖ HSS 9930 ( HSS9930 ) MK5 65,0 x 800 Ø 65 mm Dimensions: 960 x 65 x 65 mm

Drill, High Frequency Tool, High Frequency Machines BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! Dimensions: 450 x 300 x 90 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm

Drilling machine, high-frequency tool, high-frequency machines BOSCH 0 602 102 001 0.16 / 0.2 KW 2300 / 3300 rpm / 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! Dimensions: 350 x 200 x 70 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207629 Diameter: Ø 12.25 mm 420279013 K20 Holder: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Internal Cooling Twist Drill DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) Diameter: Ø 18.25 mm Pickup: Ø 20 m New ! Dimensions: 200 x 20 x 20 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207628 Diameter: Ø 10.25 mm 420279012 K20 Holder: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm

Twist drill HOMMEL HSS, DIN 345, Type N, ( HSS,DIN345,TypN, ) Diameter: Ø 32 mm 10510287 New ! Dimensions: 340 x 38 x 38 mm

Twist drill bit with internal cooling DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) diameter: Ø 18.25 mm holder: Ø 20 m used, tested ! Dimensions: 200 x 20 x 20 mm

Drill Bit Insert FAHRION E34-MK1 4332163270553 inner cone MK1 New ! Dimensions: 87 x 46 x 46 mm

Deep Hole Drills, Gun Drills with Internal Cooling GÜHRING ZL-TLB-1-R U ZFX 54,02 20 diameter: Ø 8.0 mm Total length: 700 mm groove length: 620 mm Shank diameter: Ø 25 mm Shank length: 80 mm New ! Dimensions: 700 x 25 x 25 mm

Twist drill GARANT 11580 HSS ( 11580HSS) Diameter: Ø 29 mm New ! Dimensions: 580 x 30 x 30 mm

Deep hole drills, gundrilling drills with internal cooling PAGUS TBT Ø 10,000 15 x 480 ( TBTØ10,15x480 ) K15 C40 51/07 Diameter: Ø 10,15 mm Total length: 490 mm Groove length: 400 mm Shank diameter: Ø 16 mm Shaft length: 50 mm New ! Dimensions: 490 x 16 x 16 mm

Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.5 x 17.0 mm solid carbide DK480UF shank: Ø 25 mm with internal cooling ! New ! Dimensions: 120 x 25 x 25 mm

Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm

Step drill bit with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm

Drill tailstock, deep hole drilling rig POREBA feed rate up to 1000 mm suitable for Poreba TPK-80 ! feed speed 1.2 to 100 mm/min with accessories ! used, tested ! weight: 930 kg ! Dimensions: 2400 x 1000 x 700 mm

The INGERSOLL RAND TH60 drilling rig is a versatile and powerful machine designed for various drilling applications. It is built with robust construction, advanced technology, and a user-friendly interface, making it suitable for both onshore and offshore drilling operations. The rig offers high performance, reliability, and safety features to ensure efficient and productive drilling operations. Specifications: Water Well Rigs - 2002 international with Cat engine, 18 speed, new front tires . Rig is 1979 TH60 with 5x6 garner denver punp with new gear and pump end. 640" of new 89mm6.1m(20´) 12mm 2 3/8" IF rod, two new stabelizers, new murphy fast plug. Rig is direct hyd so no air over hydraulic. Less prob easy to fix! There is a portable pump to use due to highway weight regulations. Find more here - / Contact us at -

bore capacity in steel St 60: 32 mm bore capacity in cast iron GG 20: 38 mm Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 tool taper: Kurzspindel MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 515 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 117 / 701 mm feed: von Hand spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,45/1,9 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 pieces new drill bits for double or quad drill dead drill machine, New, never used.

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

- invoersysteem voor vlak- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Platstaal gt; maximale lengte: 15 200 mm gt; maximale breedte: 50-500 mm gt; maximale dikte: 5-25 mm Hoekstaal gt; maximale lengte: 15 200 mm gt; maximale breedte/hoogte: 50 x 50 - 200 x 200 mm gt; maximale dikte: 16 mm gt; maximaal gewicht: 750 kg Hydraulisch ponsen VPO 1000 gt; cap: 100 ton gt; perforatiediameter/dikte: 57/15 mm of 32/25 mm gt; 4 ponsunits voor vlak staal gt; 1 ponseenheid voor hoekstaal gt; incl. gereedschap Hydraulische schaar voor vlak staal VPS 2200 gt; cap: 220 ton gt; breedte/dikte: 500/25 mm gt; hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 gt; cap: 240 ton gt; 200 x 200 mm / 16 mm Hydraulische coderingseenheid VNI 1/36 gt; 1 codeerschijf gt; 36 tekens gt; tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 gt; 37 kW - 250 bar

! Exhibition Machine Corresponds to the Panhans LLB116 with the following optional accessories: - Single-lever operation with fine locking - Dial gauge in the handwheel for height adjustment SPECIFICATIONS: - Max. drilling depth 145 mm - Max. elongated hole length 240 mm - Height adjustment 135 mm - Motor power 1.3/1.7 kW - Suction nozzle Ø 100 mm - Machine weight 200 kg

! Exhibition Machine Equipment/Technical Data Work table mm 800x400 Motor kW 1.5/1.9 kW Spindle speed rpm 1440 / 2880 Max. slotted hole height above the table mm 160 Max. longitudinal work run mm 345 Max. transverse work run mm 245 Spindle stroke mm 160 Clamping Ø of tool mm 0 - 20 Max. tool length mm 175 Span Center Piece 2 Rotating table ° +/- 45° Dimensions of the machine mm 1500x1100x950 Machine weight kg 345 Other features: - Mechanical dowel device, distance 16-22-25-32 - Mechanically numerical spindle height display - Suction nozzle

Column Drill IXION - MAXION Type Unimax 3Fabr. No. 201516 year of construction 2009Drilling capacity 30 mmSpindle holder MK 3 - short quillThroat projection 260 mmQuill stroke 125 mmTable size 360 x 500 mmColumn diameter 110 mmSpindle speed 80 - 3200 rpm. infinitely variableMotor power 0.8 / 1.5 kWWonnection connection 400 volts, 50 Hz- Spindle speed via 2 V-belt steps, 2 motor speeds and infinitely variable via variator drive- Motor speed level 1 for clockwise and counterclockwise rotation, motor speed level 2 for clockwise rotation - handwheel

A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible.

A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.

weight: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 10 mm throat: 0 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60 mm throat: 420 mm bore stroke: mm total power requirement: 4 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m Drilling Ø, steel or cast iron 60 mm Boring Ø with pre-bore ½ 100 mm Table Ø 600 mm Distance between spindle and column 420 mm Spindle taper MK5 12 spindle speeds 120 - 800 rpm Quill stroke 270 mm Mounting height above rotary table 800 mm Mounting height above base plate 1,400 mm 8 drilling feeds 0.13 - 1.8 rpm Spindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 Hz Weight approx. 2,600 kg Accessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.