rack drive in used for sale

Auction-ID: A1-41946-128

Rippert HL9-630/1070-Bex Extraction system Type : HL9-630/1070-Bex Position : LG 0 Volume : 27,500 m³/h Pressure Increase : 3,750 Pa Density: 1.2 kg/m³ Power Input : 39.0 kW Temperature max: 40°C Temperature Medium: 40°C Motor Capacity : 45.0 kW Speed : 1,450 1/min (RPM) Max. Speed: 1,450 1/min (RPM) Special Speed: 1,450 1/min (RPM) Capacity: 100,000 m³/h Filter hoses: 462 pcs., 4190x140 mm Ø, PE – needle felt 400 g/m², antistatic, calendered, with test certificate class M, the filter hoses were only completely replaced in 12/2022 Support type: Spiral springs for hanging in tabs of the filter hoses Find more here - / Contact us at -

In various grain sizes from P40 to P80 Auction-ID: A1-46604-125

Windsor Klöckner W2700 - 27780 Injection Molding System Wittmann handling system included Injection Volume: - Strock volume: 20300 cm³ Clamping Force: - Schließkraft: 2700 kN Injection Pressure: - Einspritzdruck: 1360 bar Main Connection: - Network 1: - Voltage: 500 Volt - Frequency: 50 Hz - Total Power: 418 kW Cooling Water: - Volume: Not specified - Max Temperature: 32°C Weight: - Total Weight: Not specified Find more here - / Contact us at -

Working width 6 m. Stored in working condition but has been idle for 2 years. Auction-ID: A3-43529-10001

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/75/H50 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 160/100/H85 mm -Total weight: 6.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 100/75/H65 mm -Total weight: 2.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/90/H75 mm -Total weight: 4.4 kg

Printed circuit board 734 QI (PCB) / control PC with integrated touch display on the insert, for Bobst Alpina 110 II matic. PCB Printed circuit boards 734 QI / control PC with integrated touch display on the feeder, for Bobst Alpina 110 II matic. Manufacturer numbers and replacement numbers: BSA07230000BW / BSA07230000BT / BSA07340000TH

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 3.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 5.3 kg

Measuring tripod - heavy duty version Measuring height 290 mm Measuring range transverse arm 260 mm Diameter of measuring column 40 mm Cross arm diameter 28 mm Base plate 500 x 235 mm Base plate thickness 35 mm Weight approx. 38 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/125/H75 mm -Total weight: 5.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/85/H58 mm -Total weight: 2.1 kg

Machine name: Inversion system for liquid polymers Manufacturer: Reiflock Type: Reifomat 500 Year of Make: 1999 Conveying / Dosing of: Liquid Polymers Capacity: Polymer flow: 0.12 - 2.5 l/min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Curb weight: Approx. 120 kg 2Ygvwomvc Tech. Documentation: Yes Note: Achievable flocculant concentration: 0.07 – 2.5 % Electrical connection: 380 V / 16 A connected load: approx. 2.2 kW Condition: Used Price: On request

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/80/H65 mm -Total weight: 3.2 kg

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Auction-ID: A7-46690-32

Caterpillar C9.3 - Unused - 340 kW - NGH

Auction-ID: A7-46690-34

Auction-ID: A7-46690-31

Auction-ID: A7-46690-6

Auction-ID: A7-46690-47

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

Auction-ID: A7-46690-3

A curing injector from Günther is sold Type: PI 17 Year of construction 2016 Capacity: approx. 300 to 500 kg/ hour Equipped with 17 needles in 2 rows, needle size (standard) approx. 4.0 mm The injection quantity is infinitely variable from 2 to 25 % Machine is in very good condition and ready for immediate use Price from stock 6000€ net

Auction-ID: A7-46690-27

Key data: 700 kN, 132 g/PS, 35 mm

Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes

Auction-ID: A7-46690-4

MAX DIAM 200

Kuka KR 16-2 Year of Make: 2010 Payload: 16 kg Reach: 1611 mm Control: KRC2ED05

Auction-ID: A7-46690-44

Auction-ID: A7-46690-30

Auction-ID: A7-46690-46

TECHNICAL SPECIFICATIONS Manufacturer: GEKO Name: Concrete recycling plant Type: Stationary Type: FLOMAT 20 Year of Make: 1995 SPECIFIC COMMENT - New bearings of the main shaft - Gearbox reconditioning and engine overhaul - New lining of the complete trough - New lid - New rubber buffer vibrating trough - New washing paddles and new screen linings on the cups - New unbalance motor on the dewatering screen - Dismantled and ready for loading

Auction-ID: A7-46690-1

Auction-ID: A7-46690-33

WITH CUTTING DEVICE S. No.: 98 0044 10

Auction-ID: A7-46690-26

Auction-ID: A7-46690-2

For sale: Tetra Pak straw applicator TSA30. Year: 2010 Working hours: 20.567

For sale: Tetra Pak straw applicator TSA30. Year: 2011 Working hours: 21.500

Key data: 50 , 1 , 14

Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger