rack drive in used for sale

Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate

Inductive sensor, electronic sensor Manufacturer: IPF Product type: IB 160100 -Quantity: 2 available Price: per piece -Weight: 0.1 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, wet vacuum cleaners -Connection: 220 volts -Plastic container for suctioning liquids Performance: unknown -Weight: 22 kg

Internal micrometer screws, micrometer screw, inner diameter -Measuring range: 35-50 mm -Measuring range: 50-70 mm -Measuring range: 70-100 mm -Measuring range: 100-145 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Including case -Weight 0.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set, 4-piece hard -Jaw width: 38 mm -Dimensions: see photo techn. drawing -Dimensions: 130/150 / H90 mm -Total weight: 8.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 34 mm -Overall dimensions: 130/100/H80 mm -Total weight: 5.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Overall dimensions: 70/60/H55 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: 70/60 / H50 mm -Total weight: 1.0 kg

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Agilent G 1362 A RID Detector Refractive Index Range 1.00-1.75 RIU Measurement Range +/- 600x 10-6 RIU Sample Cell 8 ul Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN

AS interface lower part -Lower part with addressing socket -for connection to flat cable -Number: 18 pieces available -Minimum purchase 2 pieces -Price per piece

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output, interface module -Manufacturer: Siemens Simatic S5 Interface Module -Type: 6ES5 306-7LA11 -Cardboard dimensions: 310/250/H50 mm -Weight: 0.8 kg

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input ovp -Type: 6ES7 321-1HB02-OAAO -Number: 2x module available -Price per piece -Cardboard dimensions: 150/130/H45 mm -Weight: 0.2 kg/pc

PLC control, digital input -Manufacturer: Siemens, Simatic S5 Digital Input Original Packaging -Type: 6ES5 422-8MA11 -Number: 4 modules available -Price: per piece -Cardboard dimensions: 140/135/H50 mm -Weight: 0.2 kg/pc

PLC control, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BL00-OAAO -Number: 2 modules available -Price: per piece -Cardboard dimensions: 115/40/H125 mm -Weight: 0.4 kg/pc

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BH10-OAAO -Number: 1x module available -Price per piece -Cardboard dimensions: 115/40/H125 mm -Weight: 0.2 kg/pc

Pig dehairing machine Baumann Dimensions: 240x100x145cm

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S5 digital input ovp -Type: 6ES5 421-8MA12 -Number: 9x module available -Price per piece -Cardboard dimensions: 140/110/H50 mm -Weight: 0.2 kg/pc

PLC control, digital input -Manufacturer: Siemens, Simatic S5 Digital Input (Original Packaging) -Type: 6ES5 431-8MA11 -Quantity: 1 module available -Cardboard dimensions: 140/110/H50 mm -Weight: 0.3 kg

PLC control, digital input -Manufacturer: Siemens, Simatic S5 Digital Input (Original Packaging) -Type: 6ES5 431-8MD11 -Quantity: 1 module available -Cardboard dimensions: 140/110/H50 mm -Weight: 0.3 kg

Pig dehairing machine Rothman Dimensions: 230x120x135cm

PLC control, digital input -Manufacturer: Siemens, Simatic S7 Digital Input EM221 -Type: 6ES7 221-1BFOO-OXAO -Number: 2 modules available -Price: per piece -Dimensions: 105/60/H85 mm -Weight: 0.2 kg/pc

PLC control, digital input, digital input, electronic module, digital input module -Manufacturer: Siemens, Simatic ET 200SP digital input module -Type: 6ES7 131-5RDOO-OABO -Number: 1x module available -Price per piece -Dimensions: 80/30/H90 mm -Weight: 0.1 kg/pc

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Dosomat cup filling machine, type: 10/3, diameter cup: ø 83 mm x 30 mm, overall dimensions: 1810 mm x 1700 mm x 2050 mm.

Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.

Lightbus combination input/output module, input/output module, parallel input/output, analog output -Manufacturer: Beckhoff, analog output -Type: M-2400 -Input voltage: 24V DC -Price per piece -Number: 2x available -Dimensions: 270/70/H75 mm -Weight: 1 kg/pc.

Lightbus combined input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, Input/Output Module -Type: M-1410 001 -Input voltage: 24 V DC -Quantity: 1 available -Dimensions: 165/75/H70 mm -Weight: 0.7 kg

The scope of delivery includes: Depth web frame, new with push-through protection Material color: sendzimir galvanized for column depth: 1,100 mm Total depth: 1,250 mm Total width: 850 mm Support angle: 1,250 x 100 x 50 mm Cross connector: 850 x 35 x 35 mm Material thickness: approx. 3 mm Weight/pcs.: approx. 12,00 kg These are goods to order with at least 10 working days delivery time! Note: The depth web frame and the integrated Push-through protection in the event of transverse and transverse damage. Longitudinal storage of containers, lattice boxes and pallets, a slipping of the storage unit. These also serve to stabilize the Pallet storage on the rack. General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately ...

Level indicator, sight glass, steel reflector, sight glass fitting, sight glass device -Manufacturer: Eriks, Econ Level Indicator -Type: FIG. 1590 -Test pressure: 3 bar -Number: 2x level indicators available -Price: per piece -Dimensions: 100/60/H3050 mm -Weight: 25 kg/pc.

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...

Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA, Sunny Boy Photovoltaic Inverter -Type: SB 3300TL HC -PAC nom: 3000W -Dimensions: 470/205/H495 mm -Weight: 26.7 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA Schüco, Sunny Boy Photovoltaic Inverter -Type: SB 3300 -PAC nom: 3300 W -Dimensions: 440/360/240 mm -Weight: 42 kg

Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Transnorm Rising falling Incline with arch belt conveyor GF 5140-600-500 RA2082 Technical data: Conveyor length (NL): 5140 mm (4640 mm incline + 500 mm arch) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): please contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5140 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentr ...

Forklift battery indicator, electric pallet truck battery indicator, Justcap, battery hour meter -Manufacturer: Stier, battery indicator for electric pallet trucks / E-forklifts -Type: 51060264 51047003 -Number: 4x indicator available -Price per piece -Dimensions: 65/35/H65 mm -Weight: 0.1 kg/pc.

Transnorm Rising falling Incline with arch and forerun belt conveyor GF 12965-700-600 RA2076 Technical data: Conveyor length (NL): 12965 mm (3000 mm forerun + 6865 mm incline + 3100 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12965 Nominal / outs ...

Budde roller curve right or left 90° with pass through 2955-670-620 IR795 RA1687 Make: Budde Running direction: 90° right running/ left running Roll width (RB): 620 mm conical, plastic coating Nominal/external width (NB): 670 mm Inner radius (IR): 795 mm length: 295mm Height frame: 125 Height including motor: 380 currently set to a height of 700 Height adjustable Roll gap: 75-120 motor MOVI-Mot 3x300-500V 0,37kW 1400 rpm max Gear motor: SEW R17 DRS71S4/MM03 Conveying speed: freely adjustable between 0,11 and 0,7 m/s with frequency converter Scope of delivery: with 3adjustable supports, 3 Light Beam and a push button Features: condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 670 Roll width in mm: 620 angle: 90° Driven: YES scope of delivery: 3x Stützen, 3x Lichtschranken, 1x Rollentaster For individual, expert advice, simply get in touch with  ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Overall dimensions: 90/70/H95 mm -Total weight: 2.1 kg

Inductive sensor, electronic sensor, proximity switch -Manufacturer: Telemecanique, inductive sensor proximity switch unused original packaging -Type: XS4 P30PC410D -Number: 3x sensor available -Price per piece -Cardboard dimensions: 80/70/H45 mm -Weight: 0.1kg/pcs

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter, -Manufacturer: RSF, Converter -Type: ZEV 5 Ord.-No. 14 369 519 -Number: 3x converter available -Price per piece -Dimension: 230/60/H35 mm -Weight: 0.3 kg/pc.

Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on req ...

AS-Interface lower section -Lower part with addressing socket -for connection to flat cables -Quantity: 2 pieces available -Price: per piece

Recon Part Number: 2659105 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 54/54/H42 mm -Total weight: 0.6 kg