129,522 used machines on RESALE, but how to find them? Machine Search
Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves
NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.
FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...
Profisafe, Input/Output, 6ES7 138-4FC01-0AB0, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Leybold Optics H3200 it is a horizontal inline sputtering system H3200 for the separation of Cu - In-Ga layers, glass substrates, which are coated from above, run continuously in this, it is a universal system for glass coating / architectural glass coating with 3 large process chambers and 8 infeed and discharge modules 3 modules of 650 mm run side by side in the process the plant is as good as unused, (it did not come to production, only sporadic attempts), is already dismantled and stored in the north of Brandenburg Year of construction 2009 , plant number 070817 Type H3200 Original price of the inline sputtering system (2009): 5.600.000,- € the sales price is net plus VAT incl. loading and transport for Germany Dimensions : 24,335 m x 4,30 m Weight: approx. 120 t the three process chambers are special transports incl. all parts and document ...
PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...
SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm
Miwe proofing room GR -Miwe proofing room -Year of construction 2013 -15.58 kW -400/230V 3/N/PE 50Hz
Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.
Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm
Dear Sir or Madam, As good as new unused 1x concrete station with 4x 680KVA inverter 1xTransformer station with switchgear see photos for details
Bottler with 4 x filling head (additional device for lateral movement for filling dough/mass strips) in elongated shapes Item condition:maintained Availability: immediately
Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...
One Way Filling line for Beer Capacity: 4000 bph Installed for 0,33 liter Stubby Bottle, 0,33 liter Steinie Bottle Holdefleiss 24 head counter pressure filler with 6 head crowner model early 70. Fimer Rinser 16 head 3-4000 bph. Year? (From kahl Schlichterle 2016) Gernep Labetta labeler 6-480 SK 3-4000 bph. Year 1996? Depall. Dansk Maskinmontasje 2016 Side Grib Conveyor, Carry Line 2016 Bottle conveyors. Dansk Maskinmontage 2016
RECON valve bridge inlet and outlet MAK M43B and M43C MAK Part Number Inlet: 433515-100 MAK Part Number Outlet: 433515-200
Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim
Arc welder Manufacturer: Oerlikon Type: Minicito
Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,
New! Part number: 0212 9007 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2
Sigmatek CAI024 C-DIAS digital bus module - analog input module. The device was temporarily used under favorable conditions in a test station, hardly used, mostly for testing the software when setting up new systems. Price per piece. Invoice with VAT We may be able to assist you if you have any uncertainties about the software (e.g. if the software monitors the serial number). Feel free to call us.
Switchgear, control, flame sensor, flame monitor, UV flame sensor, UV sensor -Manufacturer: Siemens, infrared flame sensor OVP -Type: QRA55.C17 -Voltage: 100-110 V -Dimension box: 220/65/H65 mm -Weight: 0.5 kg
Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German
Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg
Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: SUNNY MINI CENTRAL photovoltaic inverter -PAC nom: 8000 W -Dimensions: 610/480/H250 mm -Weight: 21 kg
Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor
Key data: 600 , 172 , 40
Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German
MIG/MAG hose package extension, intermediate hose package -Length: 16.0 m -Plug -Water cooled -Weight: 16 kg
Safety switch, safety interlock -Type: AZM 161SK-12/12RK-024 -Protection class: IP 67 -Locking force maximum: 200 kg -Volt: 230 V. -Number: 14x available -Price: per piece -Dimensions: 130/90/H30 mm -Weight: 0.4 kg
Key data: 500 , 132 , 35
Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1
Inductive sensor, electronics sensor -Manufacturer: IFM, inductive sensor -Type: IGM207 -Number: 2x sensors available -Price: per piece -Dimension rolled up: 150/150/H20 mm -Weight: 0.3 kg/piece
1 used residual concrete recycling plant BIBKO ConTec, year of construction 1992, without control, spare parts available, rep. needy, sale ex location Upper Franconia
FERMENTATIONSMASCHINE - GEBRAUCHTE H: 190CM DURCHMESSER: 125 CM FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE
The injector is a device for introducing brine solution through point injection of the raw product. Producer: Fomaco; Model: FGM 208 B; The machine has 208 needles (4mm diameter); The width of the tape is 740mm; The conveyor belt is not complete; Without brine filter; Length: 2300 mm; Width: 1200 mm; Height: 2300 mm; Weight: 1500 kg.
Contactor, semiconductor contactor, contactor, power contactor, illuminated button, indicator light approach -Square D: indicator light attachment D1V1Y -Diameter: 22 mm -Price: per piece -Quantity: 40 pieces -Minimum order quantity: 5 pcs -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece
Contactor, semiconductor contactor, contactor, power contactor, illuminated pushbutton, indicator light attachment -Square D: indicator light attachment DWSM -Diameter: 22/30 mm -Minimum order quantity: 5 pcs -Quantity: 84 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece
Key data: 1000 , 166 , 40
Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface
Contactor, semiconductor contactor, contactor, power contactor, illuminated push button, indicator light system -Square D: indicator light attachment D1V1W -Diameter: 22 -Price: per piece -Quantity: 90 pieces -Minimum order quantity: 5 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece
Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow
Industrial robot Manufacturer: Kuka Type: KR30-3 Year of construction: 2011 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka Control KRC4 Weight: 150 kg Software V8.3.40 Kuka Touch Panel Kuka Interconnectors
Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg
Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 30 m³ Dimensions: Ø 2.50 m × 6.60 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow
used
RECON Part Number: 37755-05100 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Cloud m600 advanced inkjet printer, 3 print heads and cables, - Cloud-m600 advanced inkjet printer, 230V AC, - I/O connection cable control voltage 5V+24V DC, - Three print heads red, one without scraper plate, - Three print head cables 3m, - Connection cable for rotary encoders,
maximum number of results exceeded
please refine your search
