rack drive in used for sale

REF-2527-2528 INDUFLEX ICS II TWIN CAP SORTER AND FEEDING SYSTEM 2 UNITS IN STOCK Screw cap sorting and feeding system composed of a twin hopper and a twin elevator conveyor. The elevator transports the caps towards the outfeed in the correct direction and position by means of Jetstream conveyors. Manufacturer: INDUFLEX Model: ICS II Serial numbers: 6026 / 6031 Year: 2006 Throughput: 2 x 12,000 caps/hour Power supply: 230-400 V / 50 Hz / 3Ph+N+PE Electricity consumption: 32 kVA Compressed air pressure: 0.63 Mpa / 6.3 bar Overall dimensions: width 1,450 mm, length 3,100 mm, height 2,700 mm Adjustable-height outfeed Weight: approx. 750 kg

Inv. Num. : 7802 Type: G300 Producer: INDEX Created: 2003 Parameters: Control system: Siemens Maximum turning length: 710 mm Maximum turning diameter: 270 mm Number of axles: 9 pieces

One used Müller Martini Inventa Plus 3212 Year of man. 2001 Max. Size : 320 x 385 mm Min. Size : 80 x 120 mm Mechanical Speed : 20-200 Cycles/Min

Antistatic industrial flooring, grey mottled used, good condition Click plates Thickness: approx. 10.4 mm Different sizes available: ca. 410 pcs. Abm. approx. 600 x 600 mm approx. 129 pcs. Abm. approx. 600 x 300 mm ca. 90 pcs. Abm. approx. 1,000 x 600 mm ca. 40 pcs. Abm. approx. 1,200 x 600 mm ca. 3 pcs. Abm. approx. 600 x 530 mm Price: on request Location: Bochum Intermediate trade reserved

Control amplifier, servo motor control -Type: 3 TRM 2 G11-WO/ZE 5 -2 Pulse Thyroid Control Amplifiers -9 V/1500 46 A/9 V -9 V/3000 11 A/1.1 V -9 V/1500 46 A/9 V -Weight: 9 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Typical current: 40 A -DC circuit nominal voltage: AC 700 V -Dimensions: 65/410/H260 mm -Weight: 7 kg

Wallace Micro Indentation Tester

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

Position scanner, laser, barcode scanner -Voltage: 230VAC 50Hz 110mA -Sec: 10 V 1000 mA 10 VA -Laser class: 2 -Weight: 2 kg

Fully functional Index Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

1700 : EL 400 30 pcs. DM 50 Steel axle M8 i 1100 : EL 470 100 pcs. DM 50 Steel axle 10mm Price per piece / as good as new

Offer 14044 Specifications: - 2-fold side edge belt sanding device - Sanding belt dimensions approx. 620 x 20 mm - Grinding equipment adjustable by handwheel - Support belt motor-driven - Support band dimensions approx. 2050 x 350 mm - Tilt-adjustable support strap - Table height approx. 950 mm -Mot. Grinding dust extraction - Drive 400 V - Space requirement approx. W 1100 x H 1450 x D 950 mm - Weight approx. 200 kg

ENIDINE HD 2.0 x 28 FMP Industrial Shock Absorber / Hydraulic Buffer – Heavy Duty Damper Sell a large ENIDINE/ITT Enidine Industrial Shock Absorber from stock. Data according to nameplate: Manufacturer: ENIDINE / ITT Enidine Type: HD 2.0 x 28 FMP P/N: FMP34530-R Heavy-duty hydraulic shock absorbers / industrial buffers For mechanical engineering, conveyor technology, crane systems, end stops, industrial plants, etc. The shock absorber is in a sturdy wooden box. Condition see pictures. Probably unused stock, but with traces of bearing and dirt. Function was not checked, therefore sold as stock goods/spare part. Important note: Do not open – component is under pressure according to the warning. Price: 500 € VB Pickup only due to size and weight. Private sale / stock liquidation, no guarantee, warranty or return.

koop Krohne Flowmeter Type: Optiflux 2050 DN 150 Serial Number: A 1907142 Order number: 3.0014 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459

This ingredient handling system is a modernized weighing and dosing unit designed for precise gravimetric processing of bulk materials. The installation has been upgraded to include an advanced weighing function, ensuring accurate batching and efficient material handling. Manufactured by Zeppelin Systems, the system combines robust mechanical construction with reliable pneumatic conveying technology, making it suitable for continuous industrial operation. Key Features Gravimetric weighing system for precise dosing (up to 25 kg per batch) Pneumatic conveying via pressure vessels Two weighing hoppers with integrated discharge systems Compact modular frame design Combination of mechanical, electrical, and pneumatic components Suitable for powders, granulates, and bulk solids Technical Specifications General Data Manufacturer: Zeppelin Systems Year of main installation: 09/ ...

We sell 1500 x Intel Xeon Gold 6130 2.1 GHz processors In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from al ...

Key data: 243 KW, 2200 1/min

We offer completely overhauled Scania DC/DI12-54/56A industrial engines in exchange. These engines have been certified by the Scania Service Partner overhauled with test bench certificate.We sell all engines in exchange.We sell for a surcharge even without returning old parts from the factory zeven/Germany. If you have any questions, please contact: MIW GmbH Engine Repair Plant Nord-West-Ring 8 27404 Zeven Geramny Phone:0049(0) 4281-950583 Mail: infoatmiw-zeven.de

Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions

We sell 25 x Intermec PX 4i printer In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufacture ...

We sell 2000 x Intel Xeon 8174 CPUs In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufacture ...

We sell 53 x Sandisk X300 SSD 256GB SATA 6Gb/s 2.5" 20 x Intel DC S3710 SSD 200 GB SATA 6Gb/s 2.5" MLC In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems ...

We sell 500 x Intel compute modules HNS2600BPB These are available in the relevant rack chassis. They are air-cooled systems. (We also have sometimes DWC/direct-water-cooled systems.) In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low price ...

with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg

Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Digital angle displays on the right and left Weight: approx. 1,200 kg

Max. sheet thickness: 4 mm steel, 3 mm stainless steel Knife length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg Knife sharpened Depth stop

Technical information Exhibition Machine Brand INDUMASH Manufacturer's ref. NOTCHING MACHINE SAF 2 Model SAF 204 Table size 700 x 620 mm Weight 550 kg Gross weight 550 kg

Specifications CNC-controlled glass cutting table The Intermac Genius CT37 is a compact yet powerful CNC cutting table for flat glass , designed for precise, fast, and reliable cutting. This model is ideal for manufacturing companies seeking an efficient solution for daily cutting work with high repeatability. Specifications Model: Intermac Genius CT37 Type: CNC-controlled glass cutting table Cutting range: approx. 3700 mm Glass thickness: 3 – 19 mm Cutting head: motorized, automatic pressure regulation Optimization: integrated cutting optimization software Transport: air cushion or roller table (depending on version) Control: industrial CNC control with touchscreen Connections: 400V – 3 phases Condition of the machine The machine is functional and complete CNC control works correctly Mechanically in good condition Cutting head and drive checked Ready to use ...

Key data: 13750 mm, 5000 mm, 1000 mm

Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1" (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85" (5000mm) Z-AXIS, RAM STROKE 39.37" (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42" (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79" X 509.4" (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79" X 255.5" TABLE SIZE, UN-COUPLED BACK 137.79" X 253.9" DISTANCE BETWEEN TABLE SECTIONS 39.37" DISTANCE BETWEEN COLUMNS 147" RAM CROSS SECTION 23.62" X 23.62" MAXIMUM HEIGHT TABLE TO RAM FACE 127.95"  ...

ABG Vectra 410 mm 16 inches – Automatic Turret rewinder – Nice machine for long runs ABG Vectra STR 410 Autmatic Turret Rewinder Machine Details: Manufacturer: ABG International Product Line: Vectra Model: ABG Vectra STR 410 (Turret Rewinder) Web Width: 410 mm (16") Date of Manufacture: August 2008 Characteristics of he turret rewinder 410 mm web width Four-spindle turret rewinding system Automatic roll change capability Hot-melt tail sealing system Swing-arm mounted operator control panel Vectra-series machine frame and guarding 410 mm web width Automatic turret rewinding system Hot-melt tail sealing Manufactured: August 2008 Supplied by ABG International, United Kingdom The electrical cabinet documentation The machine manual

Injectstar Vacuum tumbler Stainless, 1200L tumbler, variable speed, timer controls, with vacuum, 3Ph

MARTIN MBS Automatic Butt Splicer (Year 2020) Used Automatic Butt Splicer for Efficient Web Processing Available for sale is a used MBS Automatic Butt Splicer, manufactured in 2020. This machine is designed to provide reliable and precise automatic butt splicing during roll changes, helping to minimize downtime and maintain continuous production. With its robust construction and proven technology, the MBS Automatic Butt Splicer is an excellent solution for companies seeking a cost-effective alternative to new equipment while maintaining high production efficiency and splice quality. Key Features Year of manufacture: 2020 Automatic butt splicing operation High splice accuracy and process reliability Reduced production downtime during roll changes Robust industrial design Suitable for integration into existing production lines Cost-effective alternative to a new machine T ...

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

Air Ratchet, Air Ratchet, with Torque Adjustment INGERSOLL RIM, CHARLES MAIRE BALD326L CM330462 ( BALD326LCM330462 ) Pmax: 6.3 bar speed: 390 rpm Tool holder: 3/8 New ! with underlays ! Dimension ( Air ratchet ): 410 x 50 x 42 mm Dimension ( Package ): 520 x 110 x 90 mm

Ball Bushing Linear Guide, Open Linear Bearing Unit INA KGB0 2558 PP ( KGB02558PP ) Diameter: Ø 25 mm Foot: 81 x 29 mm Hole Spacing: 68 mm Material ( Housing ): Aluminum New ! Dimension: 81 x 58 x 54 mm

Air Ratchet, Air Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD32SL CM390468 ( BALD32SLCM390468 ) Pmax: 6.3 bar speed: 300 rpm Tool holder: 3/8 New ! with underlays ! Dimension ( Air ratchet ): 420 x 240 x 45 mm Dimension ( Packaging ): 520 x 300 x 90 mm

Pneumatic Ratchet, Pneumatic Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool Holder: 3/8 New ! Dimension ( Air Ratchet ): 390 x 80 x 60 mm Dimension ( Packaging ): 520 x 110 x 90 mm

Linear guide carriage with linear guide rail INA Linear guide carriage: O4 D4 KWE 35 G3 V2 ( O4D4KWE35G3V2 ) table: 75.5 x 100 mm 4x Threaded hole: M10 x 1.5, continuous Hole spacing: 82 / 62 mm 4x Bore: Ø 7.5, continuous Hole spacing: 80 mm Linear guide rail: B7 TKD 3FG3/0300 ( B7TKD3FG3/0300 ) length: 300 mm, width: 34 mm, height: 23 mm through holes: Ø 9.5 / 15.0 mm, depth: 11 / 12 mm hole spacing: 80 mm used, tested ! Dimensions: 300 x 100 x 48 mm

The Inauen VC999 03 i FNS is a professional double-chamber vacuum packaging machine designed for industrial food packaging applications. Its dual-chamber configuration enables continuous operation and increased productivity by allowing one chamber to be prepared while the other completes the vacuum cycle. The digital control system provides precise adjustment of vacuum and sealing parameters for different product types. Constructed from stainless steel, the machine is ideal for meat processing plants, food production facilities, and commercial packaging operations. Technical Specifications: Manufacturer: Inauen Maschinen AG Model: VC999 03 i FNS Type: Double Chamber Vacuum Packaging Machine Power Supply: 400 V / 3 Phase Frequency: 50 Hz Current Consumption: 15 A Power Rating: 9 kW Fuse Protection: 25 A Operating Air Pressure: 5 – 6 bar Controls: Digital Control System Const ...

Air Intercooler type 2 | Jenbacher 369747

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

Control panel INDRAMAT, BOSCH-REXROTH CTA10-1 B-001-FW ( CTA101B001FW ) FWA-CTA10-T01-06VRS-EN Interfaces: RS232, RS485 Operating voltage: 24 V DC for front panel mounting: 185 x 110 mm New ! Dimensions ( Control Panel ): 203 x 143 x 40 mm Dimensions ( Package ): 440 x 210 x 70 mm

Electronic module, AC servo controller INDRAMAT ECODRIVE FWA-ECODRV-ASE-02VRS-MS DKC01.1-030-3-FW Dimensions: 360 x 235 x 65 mm

Mains Filter Module INDRAMAT NFE 02.1-230-008 FS 3967-8-29 250 V 8 A Dimensions: 220 x 90 x 60 mm

Mains Filter Module INDRAMAT NFD 02.1-480-008 ( NFD02.1-480-008 ) 3 x 480 V 8 A Dimensions: 220 x 90 x 60 mm