ra used for sale

sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2040 mm total power requirement: 0 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,5x0,64x1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 2,25 mm distance between columns: 2040 mm total power requirement: 7,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,2x1,7x1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rademaker Universal strewer Stainless, roller width 800mm

Rademaker Flour duster Serial: 7118-720 2007 Stainless flour duster, roller length 1000mm, discharge height 1400mm,

– German production – year of manufacture 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm motor power 2 x 37 kW feed speed smoothly adjustable on the inverter disc diameter max. 350mm bottom shaft 400mm top shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of latches four upper pressure rollers electric height adjustment possibility to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm connection diameter 200 mm transport dimensions (L/W/H) 320 / 200 / 240 cm weight ~ 5000 kg

Picker vertical – RAMA Year: 2017 Speed: 13.200 pz/h Speed with bottles: 9.600 bph Model: RM RX 1000 Safety protections.

-for pipes up to 3"; -Bending capacity: 60.5 x 4.5 mm.

– German production, instruction manual – year of manufacture 2008 – automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 800 mm cutting height max. 130 mm feed smoothly adjustable up to 80 m/min main engine power 11 kW disc diameter max. /Min. 600 mm / 400 mm possibility to program 100 dimensions line laser two-stage blade feed touch panel control connection diameter 2 x 160 mm machine dimensions (L/W/H) 620 / 160 / 220 cm weight 2250 kg

Format 520 x 720 mm, motorized turning, load capacity 800 kg, max. opening width 1330 mm

50 strokes/min

Automatic sugar coating machine Brand: Narong Industries Model: Rama NR Cota 19 series 5 DRUM DIAMETER: 19 / 48 cm CAPACITY: 3 to 7 kg Blowing / Extraction / Rotation Option - Heating - Speed variation - Extraction temperature measurement - Supply air temperature measurement - Spray pressure measurement - Light: interior lighting Research and development / Pilot unit

Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Return speed: 20 mm / sec Oil volume: 350 l Height over floor approx.: 3900 mm Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton

- Mobile gallows / unit - Hydraulic lifting and lowering - At rest -> Low point: turbine 150 mm from the ground - total height of the mast 1900 mm - Maximum lift -> high point: turbine 950 mm from the ground and total height of mast 2700 mm - Hydraulic tilting of the mixer - Vessel presence safety device Note: Mixing head can be modified on request (3-blade, Rotor / stator ...)

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Capacity: 100 ton Ram stroke: 6 - 82 mm Slide adjustment: 100 mm Table surface area : 1.200 x 710 mm Slide area: 900 x 500 mm Number of strokes: 50 / 200 s.p.m. Required power: 18,5 kW Dimensions L x W x H: 2700 x 2400 x 3500 mm Weight of machine approx.: 13,5 ton

Raskin Master 50 ton Capacity: 50 ton Deph of throat: 240 mm Max adjustable stroke: 10 > 80 mm Distance between table -- ram: 360 mm Table area: 650 x 500 mm Electric motor (power): 5,5 HP Weight: 2350 kg

Nominal force: 2500kN, hydraulic pressure: 186bar, connected load: 24kW, weight: 8.5t.

Nominal punching force: 60t, stroke speed: 60-200/min, tool installation height: 240mm, ram adjustment: 50mm, max. strip width: 250mm, max. strip thickness: 3.5mm, max. tool length: 600mm, with documentation, was maintained regularly, the machine has been idle for five years

Capacity: 100l, max. operating temperature: 50°C, the machine is integrated into a container.

Hydraulic unit with hydraulic pump RACINE / VICKERS Hydraulic unit Operating pressure: max. 44 bar Volume flow: 13 litres/min. Tank capacity: 40 litres Engine speed: 950 rpm. Motor power: 0,75 kW Mains connection: 380 Volt, 50 Hz - 1 piece Hydraulic vane pump PVQ-PSS=-06CR-J11 - Hydraulic tank with maintenance cover and oil level sight glass - 2 pieces hydraulic hoses with 12L connections, length = 950 mm Space requirement L x W x H:: 700 x 400 x 750 mm Weight: 97 kg (without oil content); used

The machine is fully functional.

System includes (1) Servo-Controlled Filling Machine Rationator Robomat L1M, number of filling stations: 8, controls: RATRONIC-CONTROL, weight: 1.1t, year of construction: 1999 (2) Capper Rationator Robocap 1/4, weight: 1.35, year of construction: 1997 (3) Labelling Machine Breitner TPE 6033, year of construction: 2004, has been regularly serviced, on-site inspection is possible.

Including spare parts and some documents.

Without documentation, accessories or spare parts, the machine is defective ist defekt.

Method: Bag-in-Box, filling format: 1.5-20l, output: 5-9/min, including documentation.

There are two identical filters available, capacity: 11,200l, max. operational temperature: 50°C, weight: 2.5t.

Weighing range: 10-300kg.

With Electric Motor RAEL PTC 120, the agitator was used in the pharmaceutical industry.

Load: 50kg, length arm 1/ 2: 2000/ 1650mm, with wall mount and lifting device.

Thenbsp;Ras ductseamer 22.82 produces longitudinal seams along the edges of square or rectangular cross-section ducts. This duct seaming machine has 15 roller shafts which are equipped with seaming rollers, and nine further intermediate rollers are located in an overhead seaming bar. The RAS 22.82 is a very simple and reliable machine that can be easily operated by one person. max thickness: 1,25 mm

Cutting Mill - Rapid 2048-KUP Year of construction: 2000 Slow-rotating granulator with gearbox with cyclones and dust collector Power: 11 kW 2 stator knives, 12 rotor knives, the sieve - interchangeable Hopper inlet: 490x160 mm Grinding chamber opening: 480x210 mm Automatic feeding of the regrind material to big-bag with dedusting Soundproof mill Price: On request

Cutting Mill - Rapid 2048-KURF Year of construction: 2005 Slow-rotating granulator with gearbox with cyclones and dust collector Power: 11 kW 2 stator knives, 12 rotor knives, the sieve - interchangeable Hopper inlet: 490x160 mm Grinding chamber opening: 480x210 mm Automatic feeding of the regrind material to big-bag with dedusting Soundproof mill Price: On request

Cutting Mill - Rapid 2048-KUP Year of construction: 2001 Slow-rotating granulator with gearbox with cyclones and dust collector Power: 5.5 kW 2 stator blades, 6 rotor knives, the sieve - interchangeable Hopper inlet: 490x160 mm Grinding chamber opening: 240x210 mm Automatic feeding of the regrind material to big-bag with dedusting Soundproof mill Price: On request

max thickness: 3 mm roller dia: 94 mm speed: 4m/min min bendradius for 90° elbow: - thickness 0,5 gt; 1,5 mm = radius 100 - thickness 1,5 gt; 2,25 mm = radius 150 - thickness 2,25 gt; 3 mm = radius 200 min bendradius for 180° elbow and ring: - thickness 0,5 gt; 1,5 mm = radius 150 - thickness 1,5 gt; 2,25 mm = radius 300 - thickness 2,25 gt; 3 mm = radius 450 power: 2 kW weight: 270 kg

Turning diameter: 1200 mm Center distance: 6500 mm Spindle bore: 150 mm Numbers of bed guide ways: 3 Weight between centres maximum: 7000 kg CNC Brand: Siemens CNC latheRavensburg - KV1 - 700 CNC  Work load flying in chuck 2500 Kg Work load supported 10000 Kg 4 Chuck 1000 mm with heavy jaws Clamping inside 200-1120 mm  Clam;ping outside 80-1000 mm  C-Steady rest 100-450 mm x 7000 Kg C-Steady rest 400-600 mmx 7000 kg Sauter 6 position revolver Swing over bed Ø:        1200mm Swing over cross slide Ø:700mm DBC Turning Length:      6500mm Spindle bore:            150mm Spindle power:           80kW Tailstock spindle Ø:     200Ø Stroke pinole:           200mm Spindle taper:        &nbs ...

Ramon 40 liter cutter, 2 speeds, bowl stainless steel, function tested

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

Rademaker / Rondo ‘salmon en croute’ line Rademaker block processor with Rondo make up line. Has been producing ‘Salmon en croute’ for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours.

pile turner Rachner RD 800 P; condition outdated; Format 600x900; Load capacity 800kg; new tilting cylinder; upper cylinder overhauled; pump and tank cleaned; new tilt valve. Pile turner Rachner RD 800 P; condition rebuilt; size 600x900mm; lifting capacity 800kg; new turning cylinder; upper cylinder rebuilt; pump and tank cleaned; new turning valve.

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm range L-W-H: 7730 x 6240 x 6700 mm control: Typ 840 D sl voltage: 3 x 400 V frequency: 50 Hz turning speeds: 0,8 - 40 U/min max. turning diameter: 3500 mm total power requirement: 51 kW weight of the machine ca.: 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports S ...

This granulator from Rapid is in the Plastima Used Machinery machine storage area. The machine is from 1999. – Brand: Rapid – Model: 8045-Kurf – Roter diameter: 45 – 80cm – Serial number: 20957 – Construction year: 1999 – Working hours: Unknown

Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg

Inv. Num. : 6505 Type: UNIGY 11kW-8 Producer: Ingersoll-Rand Created: 2004 Parameters: Total power: 11 kW Max pressure: 22 bar Maximum temperature: 60 C Machine weight: 46 kg Equipment: Compressed air dryers

RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz

cutting length: 3150 mm sheet thickness: 4 mm steel Controlled backgauge up to 1000 mm Side stop and table lengths Cutting length limitation Cut edge illumination Operating instructions Weight approx. 4200 kg

Manufacturer: VMI Rayneri Model: Turbotest 33/300 + 33/750 Year: 1997 to 2000 Type: Laboratory stirrer   Version 1: Turbotest Type 33/300 P Available units: 29 Electrical supply: 220 V Power: 440 W Intensity: 2A   Version 2: Turbotest Type 33/750 SA 2 units available Electrical supply: 220 V Power : 1,1 KW Intensity : 5A   Max speed : 3300 rpm Variable speed of mixing. Container fixing system. Product presence contact detection. Each equipment is sold with an stirring shaft and a mixing head of your choice. Magnetic stirrer and temperature sensor available as an extra.