ra used for sale

Homogenizer LAB 12.50H, SN.1-84.195 Flow Rate 100 l/h at max. 600 bar Single-stage homogenizing valve with manual adjustment poppet valves, Main motor 2.2 kW, 400V, 50Hz

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal shears make RAS type 83.25Machine -No: 27/10Technical specifications:Cutting length: 2540 mmSheet thickness max.: 3.0 mmNumber of strokes per minute: 50Cutting Angle:1.35°Table width: 430 mmTable height: 750 mmlateral projection: 100 mmRear stop adjustment: 550 mmDrive power: 5.5 kWWeight approx.: 2.5 twith- manual backgauge- manual adjustment of the back gauge from the front with reading scale- foot switch- angle stop- support arms- Tilting roller tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel tube bending machine make RASI type UNI 3Machine -No: 1740, built in 1989Technical specifications:Bending capacityMandrel bending 180 °: 60 x 3 mmR =: 1.5 x DMandrel length: 6000 mmDrive power: 3 kWExternal dimensions of the machine L x W x H: 1100 x 1100 x 1250 mmMachine weight: 700 kgWeight mandrel: 350 kgWith- Mandrel bending device 6 m mandrel length L x W x H 6500 x 450 x 1200 mm- hydraulic mandrel retraction- 3-way foot switch- mobile on castors- 1 set of bending tools built upused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electro-hydraulic mandrel bending machine make RASI type AUT 60Fabr. -No: 1332, built in 1981Max. Working area: 60 mmBending radius 1.5 x D min: 28 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0 max: 300 mmMax. Bending angle: 180 °Working height: 850 mmOil filling: 100 lMandrel length: 2000 mmDrive power: 3 kWWeight: 1050 kgWith- 2 speeds- Preselection for 5 bending angles- a lot of toolsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: neu : ca. 12 Wochen ab Auftrags : 1280 mm : 16 mm : 12 mm : 8 1/min : 3 ° : 7 pcs. : 500 mm : 22.5 kW : 250 l : 950 mm : 2100 mm : 1400 mm : 2000 mm : 5000 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 pcs. : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1300 mm turning diameter over slide rest: 850 mm centre distance: 1800 mm turning diameter: 2150 mm turning speeds: 3,15-160 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2000 mm gear width: 0 mm max. module: 0 dimensions of the machine ca.: 2x1,2x1,5 m uncomplete machine body with drive motor. drive unit fully functional. Without grinding unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 8 mm : 5 mm : 14 1/min : 3 ° : 7 pcs. : 500 mm : 7.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1800 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1200 mm turning diameter over slide rest: 900 mm turning length: 2000 mm Control: Siemens spindle passage: 90 mm type: Sinumerik 3T Tool changer: 16 number of spindle speeds: 2,4-900 U/min spindle motor: 54 kW tail stock: 3 jaw chuck Forckrath: 630 mm chip conveyor: total power requirement: 87 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 11x4,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2000 mm turning height: 1500 mm turning diameter over bed: 2400 mm table load: 10 t turning speeds: 2 - 100 (18x) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

3 guideway flat bed lathe Distance between centers: 6100 mm Swing over bed: 1500 mm Swing over cross-slide: 1320 mm

number of tanks: 60 Number of floors: 12 Stk. Width of floors: 300 mm Shelf height: 552 mm max. load: kg weight: 4,3 kg dimensions: 300 x 552 x 150 mm Dimensions of the container 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. MDF cover plate thickness 10 mm. PP material (polypropylene) Overall dimensions 85 x 40 x 165 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 36 M turning speeds: 0-100 U/min thread: M5 - M36 M working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 5,5 kW weight - pallet system: ca. 500 kg Furnishing: - hydraulic threading machine - Including machine base with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 M turning speeds: 0-600 / 0-150 U/min thread: M5 - M24 M working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 300 kg Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 16 M turning speeds: 0 - 600 U/min thread: M 5 - M 16 M working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 800 x 1000 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 250 kg Furnishing: - hydraulic threading machine - Incl. machine frame with clamping disc - mobile - hydr. manometer - stepless speed adjustment - Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Ravensburg A2,2 circulation diameter max.: 2.200 mm diameter of quill: 90 mm weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

– German production –Ce – Quickfix disc shifting system – year of manufacture 2010 TECHNICAL PARAMETERS: cutting height 110 mm cutting width 340 mm engine power 22 kW feed adjustable on the inverter electric shaft height adjustment electric pressure height adjustment Spindle in Quickfix system (possibility to change the dimension without the need for tools) the diameter of the traczy max. 350 mm spindle diameter 65 mm sleeve diameter 80 mm four upper pressure rollers four rows of anti-jet latches shoe for short elements .max. element width 700 mm Min. element length 300 mm central lubrication connection diameter 250 mm ruler machine dimensions (L/W/H) 190 / 85 / 165 cm weight 1800 kg

: neu : ca. 12 Wochen ab Auftrags : 1530 mm : 20 mm : 15 mm : 8 1/min : 3 ° : 7 pcs. : 500 mm : 30 kW : 250 l : 950 mm : 2100 mm : 1400 mm : 2000 mm : 6000 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1530 mm : 12 mm : 9 mm : 8 1/min : 3 ° : 8 pcs. : 500 mm : 15 kW : 180 l : 950 mm : 2200 mm : 1200 mm : 1800 mm : 3400 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1280 mm : 12 mm : 9 mm : 9 1/min : 3 ° : 7 pcs. : 500 mm : 15 kW : 180 l : 950 mm : 1950 mm : 1200 mm : 1800 mm : 3200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

- year of manufacture 1995 - German production -DTR - automatic blade spacing with programmable - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - motor power 30 kW - disc diameters 250/360 mm - possibility of putting on a shoe - electric height adjustment - smoothly adjustable feed 11-38 m / min - feed motor power 1.5 kW - two movable discs - possibility to program 10 dimensions per dial - control 69 P22 - three lasers - Max. element width 1000 mm - minimum element length 600 mm with a 400 mm boot - four upper pressure rollers - spindle diameter 65 mm - bushing diameter 80 mm - connection diameter 250 mm Dimensions 230x220x230 weight 2500 kg

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 10 mm : 6 mm : 10 1/min : 3 ° : 7 pcs. : 5000 mm : 11 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1900 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 6 mm : 4 mm : 14 1/min : 3 ° : 7 pcs. : 500 mm : 5.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1700 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 0 mm turning diameter over slide rest: 900 mm turning length: 1.000 mm total power requirement: 25 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine ...

external diameter: 110 mm bore diameter in mm: 32 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 100 mm bore diameter in mm: 32 mm width: 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 131 mm bore diameter in mm: 38 mm width: 151 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

: RAUHEIS Hommel TKLT 1000 : ja weight of the machine ca.: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RAFAMET KM 4 mechanical folding machine manufactured in Poland in 1990 is designed for producing bent sections from metal sheets with a maximum thickness of 4 mm, made by consecutive folding along the length of the workpiece strip. The highly reliable machine also allows for shaping sheet metal boxes, winding sheet metal edges and making wrapped and crimped connections after installation of special equipment. The folding machine is equipped with a control panel, back stop, workspace illumination and pedal for foot control. The machine has the same design and appearance as its twin folding machine OZAMECH KM 4. The total weight of the machine is 3750 kg. Technical parameters of the RAFAMET KM 4 folding machine - working width of the bending slats: 2000 mm - maximum workpiece length: 1500 mm - maximum workpiece thickness: 4 mm - smallest length of crimped sheet metal strip betwee ...

Technical specifications: Cutting width mm: 310 Cutting height mm: 120 Chain width mm: 340 Workpiece length min mm: 700 Saw blade diameter max mm: 360 Feedrate max/min: 5/48 Saw revolutions rpm: 3900 Working height mm: 850 Motor Kw: 37 Weight Kg: 3500

The scope of delivery includes: 02x Pallet rack beam, used Material colour: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Truss type: PNB0445 clear width: 3,600 mm 02x Pallet transfer station, used Material colour: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Truss type: PNB0445 clear width: 900 mm 01x L-angle, used Material colour: RAL 2004 orange Total length: approx. 1,100 mm L-profile: 100 x 50 mm Material thickness: approx. 3.00 mm Borehole grid: 50 / 50 mm 04x Screws M10 x 25 mm ISO4017 04x Nuts M10 self-locking 04x Washers M10 04x locking pins, used Finish: completely galvanized To secure the longitudinal beams against unintentional lifting Technical data for the pallet transfer station: Shelving system: Stow Type: Pal Rack NS Ideally suited for the following dimensions: Stand depth: 1,100 mm / 995 mm Stand profile dime ...

Edge strip shredder for edge trimming plastic films.

Catalogue number: 6746 TECHNICAL SPECIFICATIONS - track width 450mm - shaft width 550mm - disc bore diameter 80mm - min disc diameter 250mm - max disc diameter 400mm - max cutting height 250mm - max width of input material 900mm - min length of the workpiece 800mm in advance: - 2 rows of repellers - pulling shaft, toothed, pressure shaft - repellers - pulling shaft, toothed, pressure shaft - shaft with saws - pulling shaft, toothed, pressure shaft from below: - metal roller, slip - repellers -caterpillar - shaft with saws -caterpillar - smooth regulation of the feed speed on the inverter 0-40m / min - main motors 2x90kW - feed motor 7,5kW - electric body lift up / down 0,75kW - electric shaft adjustment with saws 2×0,75kW - central lubrication - diameter of extraction connection 330mm, 270mm - dimensions length / width / height 3150x2270x2560 ...

bore capacity in steel (diameter): 55 mm arm length: 2055 mm workpiece height max.: mm spindle taper MT: 5 spindle turning speed range: 11,2 - 1400 U/min column diameter: 450 mm spindle stroke - max.: 540 mm feed motor: 0,037 - 2,0 kW total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2580 x 1100 x 3450 mm m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rademaker SprayIng Machine Type: Pump System Year of construction 2012 4 rows Injectors System with compressed air with large funnel Stainless steel cladding 400V 50Hz on rolls Height: 193cm Width: 160cm Depth: 140cm

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Granulator Manufacturer: Rapid Type: 1514 Year of construction: 2000 - Device tested, cleaned and ready for use -