128,237 used machines on RESALE, but how to find them? Machine Search
GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...
Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50
Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...
Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50
Material: mild steel Reel in stainless steel;
used
Multifunction X-ray machine Built in 2005 Generator Poydoros SX 65/80 Image storage LIH (last image hold) Image intensifier 23 cm Tube Optitop 150/30/50 Very good optical condition
10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...
used
X-ray unit Siemens Multix / Vertix with 3D III Deckensrativ and Polydorus LX X-ray Generator
Height 1350 Width 1700 mm Length 700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Chamber dimentions 500 mm
25 lfm pallet shelf Nedcon New goods, see pictures! A top shelving system from the large manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 3.5 m Depth 110 cm, blue Carrier length 2.7 m orange Carrier with load /compartment 3050 kg, Negotiated price: € 1,680,-- net from stock Offer consists of: + 10 pcs pre-assembled frame, depth 110 cm, height 3.5 m + 36 pcs. carrier, length 2.7 m, 3050 kg load/compartment + 72 pcs mount fuses + 20 pcs concrete anchors Load sign documents, etc. are a matter of course. Further accessories can be found in the accessory catalogue. Frame blue RAL 5019, galvanizing inlinations. 2 m to 7 m heights in stock. Field load 12 tons, higher field loads possible on request. Wearer orange RAL 2008. Carrier lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton
Rated power up to 300 kg/h engine power press 1.5 (2.0) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (3 phases) Electrical fuse 16 A Laenge 1200 mm width 1000 mm He 1880 mm Basket and juice tray in 1.4301 / AISI 304 press force 24.2 to Press pressure 380 bar Juice yield up to 65% Connection for juice drain 30mm High juice drain 525 mm Hoehe Marc ejection 585 mm Supplied 1 press bag 100l, 3 insert huellen 48cm, 3 Press inserts made of acacia wood 48cm ; New machine - best condition
- replaceable stainless steel sifties for adjusting the grinding unit - food-grade - self-sufficient use or mounted directly on pre-basket presses nominal power up to 650 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A La 496 mm width 434 mm He 885 mm He he with frame 1360 mm Hehe Assumption 1360 mm Weight 28 kg weight (without / with frame) 28 / 42 kg material 1.4301 / AISI 304 Hoehe mash release 690 mm Supplied cutter 8mm ; New machine - best condition
- Adjustment of the grinding unit - for the crushing of various fruit varieties food-grade nominal power up to 1000 kg/h engine power 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 532 mm width 519 mm 1151 mm Hehe with frame 1532 mm He he Assumption 1532 mm Weight 45 kg weight (without / with frame) 45 / 59 kg material 1.4301 / AISI 304 Hoehe mash release 666 mm Supplied New machine - best condition
Ziehm Vision RFD 3D is the world's only 3D C-arm with flat-panel technology that provides a 16 cm edge length per scan volume combines 2D and 3D functionality to offer maximum intraoperative control. THE ULTIMATE C-ARM TO OUTPERFORM The treatment of cardiovascular and degenerative musculoskeletal conditions calls for high-performance intraoperative imaging technologies. Incorporating the latest CMOS technology for excellent image quality, the Ziehm Vision RFD is the ideal product. In addition to the cardiovascular-focused 20.5 cm x 20.5 cm flat-panel version, the Ziehm Vision RFD is available with a 31 cm x 31 cm CMOS flat-panel detector. This is the preferred model for highly demanding orthopedic, trauma or cardiovascular interventions that require more information in one image. Both systems are equipped with a powerful generator for optimum penetration, Advanced Active Cooling to e ...
- for the production of mash - easy operation and easy cleaning nominal power up to 4200 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Laenge 7 30 mm width 690 mm Hoe 1410 mm Height assumption 1410 mm Weight 88 kg material 1.4301 / AISI 304 Hoehe mash release 470 mm Supplied New machine - best condition
We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized 06x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,950 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve ...
Rated power 3000 up to 8000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3570 mm width 980 mm High sof 2570 mm 490 kg material 1.4301 / AISI 304 Connection for cleaning HD M22 x 1.5 or G 1/2 Ag connection for washing room 1/2 outside He he mash release 1460 - 1620 mm Height fruit delivery 1460 - 1620 mm ; New machine - best addition
We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 workin ...
A-197 Varian X-ray tubes CE-No. 0086 perm. FILT. 0.7 AL / 75 kVP 150 KL. Focus 0.30 Gr. Focus 0.80 Price on request
P78 - used approx. 7 m³ / 7,000 litres polyester tank / GRP-tank, aboveground, vertical, Staffelstein tank, in good condition. volume: approx. 7 m³ / 7,000 litres material: polyester / GRP width: approx. 2.00 m length: approx. 1.50 m height: approx. 2.70 m Vertically standing, aboveground storage tank, dome on the front side, several in- and outlets, by manufacturer Staffelstein. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Pleas ...
We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 ...
New venture for special order Requirements as you need all standart with daub/HEUFT 60 x 80 cm or 60x80cm sheets Stainless steel New
50 lfm pallet rack Nedcon New, see pictures! A top shelving system from the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 7 m Depth 110 cm, blue Carrier length 2.7 m orange Carrier with load /compartment 3050 kg Negotiation price: € 8.750,-- net from stock Offer consists of: + 19 st. frame pre-assembled, depth 110 cm, height 7 m +144 st. girder, length 2.7 m, 3050 kg load/compartment +288 St. Suspension fuses + 38 concrete anchors Payload signs documents etc. are self-evident. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher field loads possible on request. Carrier orange RAL 2008. Carrier lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and ...
Spindle cone MK 4 Machine weight approx. 2.5 t Space requirements approx. 2.2 x 0.7 x 2.5 m
We offer you here a new Pallet rack traverse for purchase. Due to the hot-dip galvanized surface, these are Traverses suitable for outdoor use. Technical data for the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery are: 01x pallet rack traverse,new Material color: hot-dip galvanized IPE profile: 120 x 60 mm Execution: Head traverse Agraffe: 2 HK (hooks) Clear width: 1,800 mm load per pair of trusses 3,600 kg, at the same time. distributed load 1x set HV set EN14399-4 - EN14399-6 10.9 Hexagonal screw with nut and discs for HV connection Material color: hot-dip galvanized In the case of these trusses, an edification for the Storage of shelf gratings welded on. (Height: 40 mm / Material thickness: 4 mm)
Te Coop: Endress & Hauser rack 5 x power supply NT470 and 20 x Omnigrad 2173 TMT type power supply: NT 470 (5 x) Type Omnigrad: TMT 2173 (x 20)
used
Siemens Uroskop Access in gutem technischen und optischen Zustand Baujahr 2005 alle technischen Unterlagen und viel Zubehör
We offer you here a used pallet rack stand of the Manufacturer Mecalux for sale. Technical data for the pallet rack stand: Shelving system: Mecalux Included in delivery are: 01x pallet rack stand, used Material color: blue Profile abbreviation: 120 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,500 mm high 850 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...
We offer you here a used pallet rack stand of the Manufacturer Polypal for sale. Technical data for the pallet rack stand: Shelving system: Polypal Type: Stockpal Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abm.: 85 x 63 x 2,00 mm Profile Type: SKMO5220P Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 1,800 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg
X-ray tube for multi star Type: MEGALIX 125/40/82CM-120W
Technical data for the pallet rack traverse: Shelving system: Redirack Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 120 x 50 mm Clear width: 3,205 mm load per pair of trusses 2,575 kg, at the same time. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried o ...
Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.
GE Revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 1 x detector 41cm 41cm separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.
Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: 4BST Box profile: 80x45 mm Agraffe: 3 hooks Clear width: 2,700 mm incl. inner position angle: W = 20 mm H = 28 mm load per pair of trusses 900 kg, at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembly our general assembly conditions must be observed Shelf insp ...
Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.
P135 - used approx. 46 m³ / 46,000 litres polyester tank, GRP tank, aboveground, on 2 steel bases, in good condition. technical details: capacity: approx. 46 m³ / 46,000 litres material: polyester tank / GRP tank manufacturer: Reich Tank specific gravity: 1.3 kg/L dimensions: approx. length 6.5 m x Ø 3.0 m x 3.4 m overall height other: Maximum operating temperature 95 degrees, used and in good condition, aboveground storage tank, lying horizontally, includes 2 steel bases. Lid and several ports on the top of the tank body, DN100 connection the front side, see photos. The tank will be repainted by us. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the ta ...
approx. 100.11 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 100,11 running meters Shelf offer 100,11 running meters ( 87 fields ) consisting of: 88 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 522 x traverse approx. 115 cm. 1044 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7350,00 € net plus legally valid VAT You will receive an invoice with VAT.
Technical data: Shelf height: 1,972 mm Shelf depth: 400 mm Total length: approx. 2,160 mm Consisting of: 3x Stand 1,972 x 400 mm - S1 12x Trusses 1050 mm long - 235 kg special load with evenly distributed load 24x Hangout fuses 6x Metal feet 6x Cover caps - Plastic These shelves are also available in other sizes. Let us create a free offer. The pictures do not correspond to the scope of the offer but are only used for illustrative purposes ! Shipping possible on request.
approx. 34.56 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 34,56 m Shelf offer 34,56 running meters ( 30 fields ) consisting of: 31 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 180 x traverse approx. 115 cm. 360 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2637,00 € net plus legally valid VAT You will receive an invoice with VAT.
Technical data: Shelf height: 2500 mm Shelf depth: 400 mm Total length: approx. 4910 mm Consisting of: 5x Stand 2,500 x 400 mm - S1 32x Trusses S-3, 1200 mm long - 320 kg special load with evenly distributed load 64x Hangout fuses 10x Metal feet 10x Cover caps - Plastic These shelves are also available in other sizes. Let us create a free offer. The pictures do not correspond to the scope of the offer but are only used for illustrative purposes ! Shipping possible on request.
maximum number of results exceeded
please refine your search
