ra used for sale

Carton erector Pextor Booster Carton sealer Glupex Handle applicator Flexrain Mapp VO3 Transport Fa. Federspiel Filling machine Rapak 1230 E Aseptic for 3 and 5 liters 10 liters should be hot-filled Aseptic filling machine for wine Capacity: 3 liters: 16 bags/min 5 liters: 15 bags/min 10 liters: 12 bags/min Running time: 5,800,000 cycles Year of construction of the complete line: 2005. The line is currently dismantled but can be inspected. Operated by 1 person.

Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...

Year of manufacture 2004 Anilox roller with 90 lines/cm as good as new condition suitable for Heidelberg SM Delivery date: immediately from stock

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325N DT Number of spindles: 90 Number of sections: 10 Spindle type: Tangential belt drive Max. mechanical spindle speed: 9,000 min-1 Max. technological spindle speed: 7,000 min-1 Spindle pitch: 366 mm Whorl diameter: 52/64 mm Twisting range: 40 to 1,869 / 32 to 1,519 tpm Yarn count range: 167 to 560 dtex Feed Package - Type: Bobbin - Max. length: 290 mm - Max. diameter: 250 mm - Volume (smooth yarn): 4,500 g Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 250 mm - Tube diameter x length: 69 x 290 mm - Max. mechanical winding speed: 200 m/min - Max. technological winding speed: 170 m/min Machine Frame Dimensions - Number of sections: 10 - Length per section: 1,830 mm - Total machine length: 19,000 mm - Machine width: 860 mm - Max. height: 1,756 mm - Height to ...

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325 NF Spindles per section: 14 Number of sections: 1 to 12 Total number of spindles: 126 Spindle type: DT 140 Spindle drive: Tangential belt Max. mechanical spindle speed: 14,000 min-1 Min. mechanical spindle speed: 6,000 min-1 Max. technological spindle speed: 12,000 min-1 Whorl diameter: 35 mm Twisting range: 59 to 2,777 tpm Yarn count range: 33 to 330 dtex Feed Package - Type: Cops (ring-spun bobbin) - Feed package length: 420 mm Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 200 mm - Tube diameter x length: 56 x 230 mm - Max. mechanical winding speed: 150 m/min - Max. technological winding speed: 140 m/min Machine Frame Dimensions - Length per section: 1,830 mm - Total machine length: 2,554 + (1,830 x n) mm - Machine width: 860 mm - Max. height: 2,14 ...

Height=0.92 m, Overall length= 0.75 m, Overall width= 0.55 m, Net weight= 62 kg,

Height=1.01 m, Overall length= 0.97 m, Overall width= 0.62 m, Net weight= 130 kg,

A precision roller straightening machine is offered. 18 straightening rollers, working width: approx. 120mm, processing size: approx. 0.2-2.0mm, machine weight: approx. 450-550kg. Inspection possible by arrangement.

Key data: 2100 mm, 105 , 4500

NEW Racking system Frame : 1050 x 4500 mm / 54 pcs Beam: 2700 mm / 200 pcs

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Manufacturer: Ratti Model: R331 Type: Double Covering Machine Year of manufacture: 1990 Condition: Used Quantity available: 2 machines TECHNICAL SPECIFICATIONS - 240 spindles - Take up: 120 bobbins, 197 x 47 mm, inner diameter 44 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Ratti Model: R325N12012 NT220 Type: Covering Machine Year of manufacture: 1998 Condition: Used TECHNICAL SPECIFICATIONS - 120 spindles - Cylinder diameter: 225 mm - Take up tube: 285 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Length: 5000 mm Width: 100 mm Height: 2800 mm Year: 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----------------------------------------------------------- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying -------------- -------------------------- Item 1 Conveyor technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main  ...

This 7-axis Yaskawa Motoman ES165D + rail was manufactured in 2014. It is designed for advanced automation tasks, providing flexibility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the Yaskawa Motoman ES165D + rail machine we have for sale. Contact us for further details.

Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual back gauge up to 550 mm side stop and table extensions Knife sharpened 1600 kg

Specifications Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerated Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/ 230V, Photos/video available: Photos available 10.2.197

A RAS beading machine is available. Working speed range: 0m-28m/min, max. sheet thickness: 1.75mm, back gauge: 330mm, weight: approx. 100kg. An on-site inspection is possible.

Specifications Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerated Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/ 230V, Photos/video available: Photos available 10.1.197

Table saw, precision circular saw Manufacturer: Rapid Model; PK-100 Motor: 2.2 KW

sheet width: 2540 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual back gauge up to 550 mm Side gauge and table extensions Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,00 t dimensions of the machine ca.: m Motorized backgauge with flip-up stops, up to 1500 mm Multiple program sequences with varying bending angles and stroke heights possible Multibend 2000 control system Ground bending beam The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us.

Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible.

diameter range 5-13 mm cutting length 2000 mm speed - meters/min 21 - 90

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

gebr. Knothole drilling machine RAPID Type: AM Built in 1987 Motor power: 0.45 / 0.6 kW 2 speeds. 1,400 + 2,800 rpm Rated current: 1.4 A / 1.85 A (380V / 16A plug) Machine stand with drilling table and integrated tool compartment Table size: 78 x 49 cm 4-spindles Lifting device when changing drill bits Unit adjustable in height (adjustment range: 100 mm) incl. swivel device Ferry incl. various Gebr. Drills Machine dimensions (approx. dimensions): 49 x 110 x 178 cm (WxDxH) The machine comes from a school training center. Very good original condition! Manufacturer information

Complete industrial Rademaker dough processing / sheeting line / rollout line with universal line, designed for the continuous production of flat dough sheets, followed by cutting into uniform square portions. Products like Puffy Pastry dough, croissant dough and Dansih patry dough sheets can be produced on this line. Line availabe for sale because of change of production., Working principle:, Feeding of thick laminated dough slabs, gradual reduction via multiple gauging / pressing stages. Formation of a continuous dough sheet, cutting (slitting) longitudinal dough strips then cutting them, with a cross cutter, into its final shape. To prevent the dough sticking to the conveyor belt a continuous flow of flour is added in different stations. The line has an automatic removal and collection of excess dough for reuse. The last part of the line is a 4 meter processing zone which can be used  ...

Two old compressors are available. 1) Oil-lubricated screw compressor Ingersoll Rand SSR MH 22, year of manufacture: 2001, max. operating pressure: 10bar, power: 25.5kW, weight: approx. 500kg. 2) Oil-lubricated piston compressor Blitz D2N 1500 A/U, year of manufacture: 1979, max. operating pressure: 15bar, air flow rate: 1400l/min, power: 15HP. An on-site inspection is possible.

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Used pastry line RONDO / RADEMAKER Consisting of: - RADEMAKER Block Processor for the gentle rolling out of dough blocks Year of manufacture: 2006 - RONDO preparation line for pastries of all kinds, such as waxed, filled products, 2 layers of dough, croissants, etc. - Guillotine, punching and cutting station ZGEM700W. A, year of construction 2009 - Calibration unit ZKWA605A. A, year of manufacture 2011 Very good condition, ready for immediate use. Visits and test runs are possible by arrangement.

Offer 26153 Technical data: - Max. projection 200 mm - Roller center distance 50 mm - Max. material thickness at 40 kg/mm² strength 1.25 mm - Space requirement approx. W 300 x H 1150 x D 500 mm - Weight approx. 25 kg - Various corrugated rollers

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

Ram Punch Gerhard Busch BL Label die cutter - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ram Punch Gerhard Busch BL Label die cutter Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ram Punch Gerhard Busch BL Label die cutter Price: 16250 EUR Download PDF Ram Punch Gerhard Busch BL Label die cutter Professional German-made machine. Perfect condition, like new, never used in production. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 220x260mm Min. format: 10x10mm Cycles: 16/min Stroke len ...

Ram punch AMC Hydromatic 220 Label die cutter - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ram punch AMC Hydromatic 220 Label die cutter Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ram punch AMC Hydromatic 220 Label die cutter Price: 8500 EUR Download PDF Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm N ...

Ram Punch Gerhard Busch CL Label die cutter - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ram Punch Gerhard Busch CL Label die cutter Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ram Punch Gerhard Busch CL Label die cutter Price: 20000 EUR Download PDF Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm  ...

Key data: 2540 mm, 2 mm

Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back gauge with folding cams up to 1500 mm Multiple program sequences with different bending angles and lifting heights possible Multibend 2000 controller Bending rail ground Weight: 1,700 kg

Height=0.8 m, Overall length= 0.83 m, Overall width= 0.85 m, Net weight= 102 kg,

Horizontal, heatable and insulated stainless steel tank with pressure gauge, safety valve, level indicator, cleaning line and valves., Additional title: horizontal, insulated, for liquid sugar, Volume: 20800 l, Operating pressure: 1 bar, Operating temperature: 20 °C, Material: stainless steel, Position: horizontal, Features: insulation pressure gauge, safety valve, fill level indicator, cleaning pipes, valves

Two horizontal stainless steel tanks with various fittings., Volume: 20800 l, Operating pressure: 1 bar, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal

Used AVE automatic rinser machine 3000 BPHTechnical Specifications & Performance DataThis automatic rinsing machine is engineered for internal washing of bottles in beverage production and industrial packaging environments. Manufactured by AVE, model RAI12, it offers dependable performance for second hand and used bottling line applications. With PLC-based automation, the unit delivers consistent rinsing cycles for glass containers, ensuring clean bottles are transferred to downstream filling and capping equipment.Manufacturer: AVEModel: RAI12Machine type: Automatic Rinsing Machine for internal bottle washingYear: 1999Production speed: up to 3,000 bphContainer material: GlassBottle format compatibility: 1.5L bottlesControl system: PLC-based automationAdvanced Automation & Control SystemsThe AVE RAI12 integrates a PLC control platform to manage rinsing cycles, infeed timing, and fault dia ...

Pressure tank with conical head and central outlet, additional tangentially mounted inlet/outle and manhole, upper dished head., Additional title: cylindroconical tank, Volume: 10000 l, Working pressure: 3 bar, Width: 2,3 m, Height: 4,3 m, Weight: 1000 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, additional tangential inlet/outlet, manhole

Used ACMI RASAR P130 palletizer - 10800 BPHTechnical Specifications & Performance DataThe ACMI RASAR P130 Palletizer is a robust solution for end-of-line industrial packaging in beverage and food sectors. Built for reliability and flexibility, it efficiently palletizes packs and cartons across multiple container materials and product categories. This second hand palletizer integrates seamlessly into a used bottling line and supports high-throughput beverage production environments.Manufacturer: ACMIModel: RASAR P130Year: 1994Maximum speed: 10,800 bottles/hour (3x2 configuration)Products to palletize: Packs and casesContainer materials: Aluminum cans, Glass bottles, PET bottlesSupported pallets: EPAL 800x1200 mmAutomatic layer-pad inserter: YesWorking height (infeed/outfeed plane): 750 mmCompressed air pressure: 6 barControl system: Siemens PLCType: Conventional automatic, low-level handl ...

This FISCHER & RüCKLE Veneer scissors was manufactured in 2007. It features a milling unit and a gluing unit for butt joint gluing, enhancing its functionality. The machine includes three replacement knives, a milling cutter, and a gluing station. Recently updated with new energy chains in 2020, it measures 7m in length, 3m in width, and 2m in height. Contact us for more information about this machine.

Used Palletizer ACMI RASAR P180 2200 plastic crates – hour General Features of the Automatic Palletizer The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour is a conventional automatic low-level palletizer designed to optimize end-of-line operations in high-speed bottling processes. Specifically, the Italian manufacturer ACMI built this model in 2007. As a result, it delivers a nominal capacity of 2200 plastic crates/hour, which ensures high productivity. In particular, it suits bottling lines that handle 1-liter formats in both glass and PET. Moreover, the system prioritizes reliability and speed in demanding industrial settings. Compatibility with Bottle Crates and Pallets The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour efficiently handles crates containing 12 glass bottles. Consequently, it proves ideal for beverage production environments where crate-ba ...

Used Automatic Depalletizer ACMI 2200 plastic crates/hour The Used Automatic Depalletizer ACMI 2200 plastic crates/hour, model Rasar D180, operates as a fully automatic system for bottom-feed depalletizing of 1-liter glass bottles packed in 12-bottle plastic crates. Specifically designed for high-speed bottling lines, the system processes up to 2200 boxes per hour. Moreover, its modular frame allows seamless integration into existing production lines. Although it is currently dismantled and in storage, the unit remains in full working condition, ready for reinstallation. Depalletizing Structure and Operating Mode The Used Automatic Depalletizer ACMI 2200 plastic crates/hour utilizes a conventional automatic vertical structure to handle pallet loading from below. This configuration, therefore, ensures optimal stability and precision during the handling of glass containers. In addition, th ...

- KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm - Spindle extention L = 600 mm with 2000 Rpm - 3D Measuring probe MP60 - ATC Chain 80 Positions - Coolant system 1320 L with 4,8 Bar - Rotary indexing table  2000 x 1600 x 15 ton - V-Axis (in feed) 1500 mm - Rotation 3 U/Min - HeidenHein RON 700 encoder for Table rotation - Ram size 500 x 500 with 56 kW - Chip conveyor 

Technische specificaties Ingangsvermogen 1,5 / 2,4 kW Snelheid 1000 + 1500 toeren per minuut   Werkstukgegevens Materialen staal, roestvrij staal, aluminium, non-ferrometalen Dwarsdoorsneden 20 x 20 tot 120 x 120 mm20 x 20 tot 150 x 150 mm10 x 10 tot 180 x 450 mm Ontbraamtijd secties 1 – 5, zware werkstukken 4 tot 12 sec.