ra used for sale

Production line is in good condition

Height=1.28 m, Overall length= 0.75 m, Overall width= 0.45 m, Net weight= 127 kg,

Manufacturer: HOFFMANN Model: RAWT Z5x4000x500 Year of Manufacture: 2001 Technical Data: - Frequency: 50 Hz - Operating Voltage: 400 V - Rated Current: 370 A - Control Voltage: 24 V DC - Solenoid Voltage: 24 V DC - Hydraulic Fluid: HLP46 DIN 51524 T.2 - Filling Volume (Hydraulic Fluid): 630 l - Max. Operating Pressure: 200 bar - Lubricating Oil: CLP68 DIN 51517 - Filling Volume (Lubricating Oil): 15 l - Workpiece loader/automation, 3 tool/clearing beams are included with the machine. - The machine has been used in 3-shift operation and is essentially in original condition. - Various spare parts (drive motor, gearbox, and other existing spare parts) can be purchased separately. Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 5.000 mm y-travel: 3.100 mm z-travel: 1.200 mm Control: HEIDENHAIN TCN 530 HSCI table surface area: 5.000 x 2.000 mm T-slots: 11 T - slots - width: 22 mm table weight: 30.000 Kg rapid traverse X-axis: 20.000 mm/min rapid motion - y-axis: 30.000 mm/min number of spindle speeds: 6.000 U/min/rpm Spindle power: 32 kW taper ISO: Kegel ISO 50 Tools changer: distance between columns: 2.800 mm Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Portable handwheel Laser tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Autojet RAPID 3002 cartoning machine. New 2019. The Rapid 3002 is a semi-automatic machine for packing sachets into cartons. The maximum capacity of the machine is 180 pieces/min. The device consists of a main machine and feed conveyors. The main machine consists of a receiving and grouping chain, a scraper actuator with a tilting scraper, a lifting table with pressure actuators, a pusher, and a carton nozzle.

RAMATIK - Automatic machine for the production of concrete products on a concrete surface (track). Manufacturer - JOSEF RADINGER – Klagenfurt - Austria Year 2007 The machine is of Austrian origin. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 35 A. The weight of the machine without the model is approximately 5 tons. The machine operates via Hawe hydraulics and electromagnetic valves. The machine was last generally renovated in 2021 It is set via a touch monitor. touch. The program on the screen can be programmed in any language. The machine can be converted into a stable machine because it has an internal table with high-frequency vibrators. The machine includes two sets of vibrators and up to 10 metal molds (models) for concrete blocks, concrete corner blocks and external chimney blocks. The machine ...

Technical data for the pallet racking system: Shelving system: META Rack Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 20,490 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: P 90 x 65 x 1.50 mm Stand Type: PN-15 Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,500 mm Depth: 1,100 mm 24x Pallet rack crossbar, used Material colour: orange Box profile: 110 x 50 mm Truss Type: 110|55 Agraffe: 4 HK (hooks) Clear width: 3,310 mm 07x Stand protector, used Material colour: hot-dip galvanised Total height: approx. 970 mm Total width: approx. 98 mm Inner width: approx. 92 mm Total depth: approx. 40  ...

Ravensburger, Type KT 45, built in 1978 Tip height above bed 600 mm Tip width faceplate for support 450 mm Face plate diameter 1,000 mm Turning diameter in the recess max. 1,350 mm with digital display Power 18.5 kW

Automatic paper size setting on feeder Suction-tape feeder table Hot air dryer Varidamp dampening Ink unit temperature control (Technotrans beta.c) Full automatic plate changer (FAPC) Cooling and recirculation Machine elevated (450 mm) Non-stop Delivery Coating unit with chambered doctor blade system (x 2) IR and UV dryer (KBA VariDry Blue IR/TL/UV) Impression-cylinder washing device - automatic (CleanTronic) Ink-roller washing device - automatic (CleanTronic) Blanket washing device - automatic (CleanTronic) Non-stop feeder Plate cylinder - coated Extended delivery (3800mm) Powder exhauster (KBA) Steel-plate in feeder Powder sprayer Sheet brake (dynamic) Double sheet detection - electronic Impression cylinder - coated Blanket cylinder - coated Central air supply cabinet (Becker) Small format device (340480mm) Speed Sheet/h (17.000 iph) ErgoTronic ACR ErgoTronic ColorControl (+ Wallscreen ...

Height=1.36 m, Overall length= 2.56 m, Overall width= 0.76 m, Net weight= 103 kg,

Key data: 100 t

Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee

Underground lathe for reprofiling train wheels without necessary disassembly. Machine is in excellent condition.

Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motorized backgauge with hinged cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 controller Segmented upper beam tool with automatic tool clamping (height 100 mm) Operating instructions Weight: 5800 kg

grinding length: mm grinding width: mm workpiece weight: kg workpiece height: mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____________________________________________________________ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed ...

WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, With a 2-year warranty!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.

Manufacturer: Rasco Model: SO1800T Year of Manufacture: 2007 Power Supply: - 400V 3 / N / PE - 208V 3 / PE - 230V 1 / N / PE - 50–60 Hz - 6 kW Air Supply: 6 to 10 bar Exterior Dimensions: - Width: 37.008 in (94.0 cm) - Depth: 43.307 in (110.0 cm) - Height: 88.583 in (225.0 cm) Weight: 871 lb (395 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour frame: Ral 5015 blue Material colour half-timbering: sendz. galvanized Frame profile: PLFB 30 Profile dimensions: P 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,250 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Schäffer 5470Z wheel loader, Technical data:, - Year of construction: 2022, - Operating hours: 450h, - Operating weight cabin with standard equipment, driver and standard bucket: 5,215 kg, - Lifting capacity: 3,600 kg, - Flow rate / option: 64 l/min / 74 l/min, - Pressure: 210 bar, Equipment:, - volume scoop, - pallet forks, - hydraulic quick coupler, Dimensions [see image in attachment]:, - (A) Wheelbase: 2,050 mm, - (B) Chassis length: 4,700 mm, - (C) Total length with standard bucket: 5,250 mm, - (D) Digging depth: 80 mm, - (E) Working height max.: 3,900 mm, - (G) Loading height with pallet forks: 3,120 mm, - (H) Max. discharge height: 2,500 mm, - (I) Height of front end: 1,530 mm, - (J) Dumping range: 420 mm, - (K) Seat height: 1,340 mm, - (L) Height cabin / option: 2,570 / 2,450 mm, - (M) Lifting height (tool pivot point) max.: 3,250 mm, - (N) Total width series / option: 1,740 - 1 ...

Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm

test

Supply air unit with heat exchanger Fabr. Huber + Ranner Type Fe-Vz/9, air flow rate 10,000 m³/h Motor power 0.8 KW ex, Fan speed 2,650 rpm

Height=6 m, Overall length= 21 m, Overall width= 3 m, Fritsch Euroline transporter. Spreading transport table.

Supply / exhaust air unit Fabr. Huber + Ranner Type Va-m-V2/8, Fabr. No. A92707/2 ZuP.1 Air flow rate 7,500 m³/min., engine 4 Kn = 1,500 rpm. Fan speed 2,600 rpm combined with: Va-m-V2/8; No. A92 707/2 P1-A1 Motor 3 KW; n = 1,500 rpm Fan speed 2,650 rpm Air capacity 7,500 m³/h

Materials: LDPE, LLDPE, HDPE // Film Width (Max): 2100 mm

Rammax RW 1504-HF, Technical specifications:, - Year of construction: 2004, - Dead weight: 1.48 t, - Driving speed: 21 km/h, - Engine power: 13.2 kW

Rammax RW 1504-HF, Technical specifications:, - Year of construction: 2004, - Dead weight: 1.48 t, - Driving speed: 21 km/h, - Engine power: 13.2 kW

Rammax RW 1504-HF, Technical specifications:, - Year of construction: 2004, - Dead weight: 1.48 t, - Driving speed: 21 km/h, - Engine power: 13.2 kW

Rammax RW 1504-HF, Technical specifications:, - Year of construction: 2004, - Dead weight: 1.48 t, - Driving speed: 21 km/h, - Engine power: 13.2 kW

Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerant Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/230V, Photos/film available: Photos available 10.2.197

The Cleanfix RA430 is a robust scrubber dryer designed for medium-sized floor areas in commercial and industrial environments. Here are the key specifications and features: Key Specifications • Working width: 43 cm • Capacity: Up to 1,700 m²/h cleaning performance • Water tank: 33 liter capacity • Brush pressure: High for optimal cleaning results • Drive: The machine pulls itself forward by the rotation of the brush • Wheels: Large wheels ensure vibration-free operation and good obstacle handling Additional Features • Suitable for use in schools, hospitals, offices, and factories 12.1.203

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.

1 RAMISCH KLEINEWEFERS 2-bowl rolling smoothing and high glaze calander type NIPCO-I model RKK 2100, 3400 mm face roller width, 3300 mm working width,   year 1990, top bowl steel chromed (electro hot water heated), lower bowl Racolan (NIPCO-roll original ESCHER WYSS)

Large working width: 3060 mm for sheet metal (at 40 kg strength) up to: 4 mm Kl. Bending radius: sheet thickness x 1.25 Kl. Inboard height: sheet thickness x 6 Opening width of the upper beam: 220 mm Adjustability of the lower/bending beam: 90 mm Max. bending angle: 180° Lifting speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Space requirement: 4150 x 1800 x 2500 mm

General SKU408T1293 MakeMettler-Toledo LocationBarneveld CEcheck TypeXS 3 Advancheck Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck General No.37000027 Year of construction2010 Mounted on framecheck With switchas is Floorspace1,6x2,2 m Total height1,9 m Weight530 kg Extra SpecificationsAccuracy class: XIII(1)Oils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesMetal detectorsOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMett ...

Auto. Film wrapping system Auto. Film wrapping system Pallets – Turntable Pallet Turntable Drive-on ramp Access Ramp Pallet weight max 2 t Weight of pallets max.

General SKU423U1428 LocationBarneveld CEcheck MakeMettler Toledo Main Features MaterialStainless steel Motor2.3 KW Specified Features - Miscellaneous Capacity3,600 scans/sec Motor2.3 kW, 240 volt MaterialStainless steel With jacketcheck General TypeR20 Mach.No.1009R20V1321 Year of construction4-2009 Floor space2,00 x 1,00 m Total height2,40 m Weight600 kg Extra SpecificationsScan speed 3,600 scans/sec, diode size 0.2, 0.4, 0.8 or 1.5 mm.touchscreen control.input belt conveyor with motor, 0.37 kW, 1380/168 rpmair pressure 6 bar- easy to implement in a systemOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-wast ...

General SKU388X984 LocationBarneveld MakeRNA TypeProzesstank Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure1 Bar Specified Features - Vertical tank Closed vertical tankcheck Capacity500 l Vessel sizesDia 800 mm x 1250 mm Dished topcheck Dished bottomcheck Top connections5 X (300 mm, 100 mm, 25 mm, 37,5 mm, 50 mm) Outlet50 mm With jacketcheck MaterialStainless steel 1.4301 (304) With jacketcheck General No.JRN-40411-B02 Year of construction1988 Floorspace0,9x0,9 m Total height2,2 m Weight160 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceu ...

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...

Technical data for the frame profile: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Frame profile, new product Material colour: sendzimir galvanised Stand Type: P73 Profile dimensions: 75 x 75 x 2.0 mm Height: 10,694 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

With the Rau sheet metal edging pliers system, standing seams on double-seam roofs can be easily edged up. The standing seam is bent first by 45 degrees and then 90 degrees by 2 bends. By means of an eccentric and large lever transmission, the pliers press the sheet metal together and this force is automatically maintained during bending. To achieve a sharp upstand, press the pliers with your foot or one hand. The BKZ enables energy-saving work. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 500 mm Weight: t 7 kg Colour: blue/yellow Dimensions: 500 x 60 x 620 mm Machine number: 1214

Dimensions (L/W/H): 9000x1400x1680 mm Weight: 1600 kg Total power requirement: 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 30 , 16 , 4

Screw compressor Weight: approx. 750Kg Volume flow: 4.88 m³ Suction pressure: 1.0 bar Speed: 3000 1/min Motor power: 30 kW

table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for sale 5 compressors INGERSOLL RAND year 2004 at 2019 model: 2x units C70MK3 430 KW 1xunits MGP655D 48 KW 1xunits C700 100 630 KW 1xunits HKO 400 480KW

Treif Dicer -Model: Raptor 150C -Power: 8 kW -Capacity: up to 4500 kg/h -Blade speed: 400 slices/min -Adjustable cutting length: 1-40 mm -Included knives: 7x7 mm, 9x9 mm, 24x24 mm -With loading for 200; meat bins -Weight: 1850 kg -Chamber dimensions: 620 x 150 x 150 mm -External dimensions: 4200 x 1250 x 2500 mm -Power supply: 400 V, 3-PE, 50 Hz -Machine made of stainless steel -Condition: used in very good condition, ready to work

Stock# UG6393 Used cutting mill by Rapid (SE) model G200-48 KURF. Mill is driven by 7.5 kW, 1470 rpm, 230-400 V, 50 Hz. Main feeding inlet has dimensions: 480 mm x 230 mm. Mill has also additional side feeding inlet for work on profiles. Rotor has bolted 12 knives, on side walls of milling chamber there are bolted two static knives. Bottom discharge via screen (10 mm) through blower, cyclone into the collection station.

plate width: 1500 mm plate depth: 4200 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: 5 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2700 mm width: 2700 mm Working height: 840 mm Hexagonal workbench / Group workbench Hexagonal workbench with 3 drawers per block and 5 vices from the manufacturer Heuer-Front. Dimensions: 2.70 m x 2.70 m, approx. 500 kg Drawer front height 140/160/160 mm, housing height 600 mm, housing width 430 mm with 6 foot sections Beech multiplex worktop with metal edge protection Some of the drawer strips are damaged (see photos). Can be reordered from the manufacturer Rau. Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.