ra used for sale

Working lenght 2040 mm Max material thickness 5 mm

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Filling line with 8-fold bottle filler, 3-fold screwdriver and lifting station The system ran until 2023 with mostly 1000 ml bottles and was no longer needed due to a new investment. Further information can be requested.

Key data: 1020 mm, 1 mm

Machine Type: Swivel Bending Machine Manufacturer: RAS Model: 61.1 Year of construction: 1965 Condition: good Offer Type: Used Machine Specifications: Capacity: 1020 x 1.5 mm Drive type: manual Remark: Material support at the back Weight: 220 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

sheet width: 1250 mm plate thickness: 16.0 mm thickness at Niro-steel: 10,0 mm blade length: 1300 mm cutting angle: 2-3 Grad no. of strokes: 13 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 810 mm blade length: 1300 mm oil volume: 350 l engine output: 18.5 kW weight: 3900 kg range L-W-H: 2150 x 1200 x 1900 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - hydraulic cutting angle adjust ...

TYPE 1 Y WALNUT SPINDLE 42 MOLDED COLLAR CHALICE 135MM TYPE 2 Y SPINDLES 35 SHAPED COLLAR CHALICE 135MM

Underfloor pull circular saw, crosscut saw, pull saw, chop saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° swiveling -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: without saw blade, (max. Ø 300 mm) -Cutting height: max. approx. 90 mm -Cutting width: 340 mm -Miter cut: up to 45° -Dimensions: 880/850/H1240 mm -Weight: 157 kg

RACUPACK CATAMARAN WRAPAROUND CASEPACKER BOX PACKING YEAR 1999 Machine for rebuilding or for parts. Year: 1999 Serial No. 499155 Glue Unit: Nordson 3100V-2EAT4D/ JR4 PLC: Siemens S7 Inverters: Hitachi Machine Dimensions: 3750 x 3050 x 2420 Electrical Supply: 220/380V ac 50Hz, 8kW

Sales on behalf of customers -Loading capacity: 1000 kg -max. opening width: 1300 mm -min. opening width: 500 mm

Conveyor belt in the shape "Z" - RAU belt Year of construction: Conveyor belt in the shape "Z" Width of the strap 40 cm Length of the slanted strap 150 cm Length of the lower strap 95 cm Length of the upper strap 50 cm Height of conveyor belt housing: 11 cm Drivers from a height of 3 cm every 36 cm Carrying strap made of plastic Conveyor belt mobile on wheels Price: On request

sheet width: 4000 mm plate thickness: 2,5 mm distance between columns: 4060 mm Control: total power requirement: 3 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a cut-off saw Raimann JRION HFS-170-3200. Built in 1995 / Kuper renovated in 2002. Cutting length 3300mm. Cutting height 170mm. Main motor 11kW Mounting surface W.4500mm x D.1700mm Rear buttock fence with digital display up to 450mm Front side stop for square work. Laser indication of the cutting line. Very good condition. Available soon. Incl. full documentation and CE certificate.

sheet width: 3190 mm plate thickness: 6 mm distance between columns: 3250 mm cutting angle: 1,2 ° no. of strokes: 32-75 Hub/min column arm: 100 mm back stop - adjustable: 5-1000 mm table height: 800 mm oil volume: 150 l total power requirement: 15 kW weight of the machine ca.: 6200 kg dimensions of the machine ca.: 3500x2000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Underfloor pull circular saw, crosscut saw, pull saw, chop saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° swiveling -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: without saw blade, (max. Ø 300 mm) -Cutting height: max. approx. 100 mm -Cutting width: 340 mm -Miter cut: up to 45° -Dimensions: 850/800/H910 mm -Weight: 141kg

turning diameter external: 4.300 turning length: 3.600 mm swing diameter over bed slide: 3.040 mm bar passage: 140 mm turning speed range: 0.18-92 U/min digital readout: HEIDENHAIN total power requirement: 56 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 9.450 x 4.700 x 4.400 m New in 1976 / 2019 - 8 independent jaw chuck Ø2.500 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic controller Controlled by PC Main drive Spindle speed range 18000 This RAPID MFC EVOLUTION II universal machining center was manufactured in 2009. It is equipped with a computer-controlled control unit. The spindle speed is 18,000 rpm.

table length: 1010 mm table width: 750 mm table height: 500 mm weight of the machine ca.: 500 kg Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Granulator RAPID 15-14 Stock No.: 503328 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503329 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1997 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503330 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Key data: 1040 mm, 2 mm

Type 52.70 Specifications: Cutting length 1040 mm Sheet thickness in St 2.5 mm Sheet thickness in stainless steel (700 N) 1.5 mm Motorized back gauge up to 500 mm Stroke rate approx. 60 rpm

Granulator RAPID 15-14 Stock No.: 503332 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503333 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503372 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Used Filling Line For Pet Bottles YOM 2001 Sipa blower equipment is in working condition still running till the end of the year These Used Filling Line For Pet Bottles are in good working condition It is possible to see all the machines in operation by the end of 2022 1 Sipa blower equipment type SF 8 4 893 year of manufacturing 2001 capacity 2L 4 000 bottles h inclusive Preform silo elevator and sorting unit inclusive in this Used Filling Line For Pet Bottles Industrial Frigo chiller Model GR2A 40 2004 2 Air conveyor system from outlet Sipa blower equipment machine to the inlet of the Radenska triblock The air conveyor system is pneumatically adjustable 14m Filling part of the line 3 Tribloc Radenska 24 48 5 Type T48 48 RP 24 N05 with 24 rinsing stations 48 filling valves and 5 capping for plastic screw caps year of manufacturing 1993 4 Complete bottle conveyor system 5 Foil shrinking m ...

Used filling line for CSD and still drinks up to 4000 bph Bottles PET and Glass In the packaging industry versatility is key This filling line handles both PET and glass bottles This double compatibility allows for great flexibility in production adapting to different market needs Filling Capacity of the used filling line for CSD and still drinks The filling capacity varies according to the size of the bottles With 0 5 liter bottles the capacity reaches 4 000 units per hour For 1 0 liter bottles the capacity drops to 3 000 while for 1 5 liter bottles it stands at 2 500 This production scale adapts to different sizes of operations ensuring efficiency and flexibility Format Molds present in the used filling line for CSD and still drinks Format molds are a crucial element in these lines This line features three interchangeable molds for PET and glass covering the most common sizes of 0 5 1  ...

Raimann KR 310 E 340/120 multi-saw with movable disc - German production - year of production 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum element length 700 mm - table width 740 mm - feed adjustable on the inverter 6-48 m/min - three rows of pawls - possibility of putting on a shoe - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electric cutting height adjustment - electric shaft height adjustment - four upper pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Machine dimensions 250x200x220 cm weight 2000 kg

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

RAPID 300 MILL granulator exhaust fan and cyclone Manufacturer: RAPID Condition: good condition, ready for operation Electrical engine installed power: 11 kW Nr. of shaft: 1 Shaft length: 300 mm Blades: 4 rotating cutting blades/ 1 stationary blade Working space: 300 x 300 mm Sieve: yes Control panel: yes Exhaust fan: yes Cyclone: yes Input hopper: yes Weight: apx. 450 kg Uploading on the truck is free of charge. Can be inspected in our warehouse in Székesfehérvár 8000, Hungary. For further information please contact us.

Key data: 1040 mm, 2 mm

Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop Knife sharpened Weight: 750 kg

sheet width: 1040 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,750 t dimensions of the machine ca.: m Manual back gauge can be operated from the front up to 500 mm Side stop Knife sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 3,80 t dimensions of the machine ca.: m Segmented upper beam rail Manual and automatic bending mode possible Bending angle adjustment via potentiometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23317 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Smallest bending radius 1.25 x sheet thickness - Minimum inboard height 6 x sheet thickness - Automatic sequential control for a complete workflow - Operation via hand or foot switch - Maximum opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

sheet thickness - max.: 1 mm Minimum duct dimensions: 100 x 100 mm bending speed: ca. 15 m/min duct size min.: bei 1 mm = 100 x 100 mm total power requirement: 2,2 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 5,5 x 0,65 x 1,1 m Video available on our website.: Electric 380 Volt: Foot switch: Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric design. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. Availability from week 8 The RRP. for this combi steamer is € 27,110 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment se ...

Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Pile turner Rachner RD 1000 P; cleaned and tested; Platform size 128x80cm; Load capacity 1000kg; Opening width max.1400mm; can also be rented. Pile turner Rachner RD 1000 P; cleaned and checked; platform size 128x80cm; lifting capacity 1000kg; max.openig width 1400mm; can be rent.

Type: Turbobend plus 62.25 Year: 2018 Capacity: - Max. length: 2500 mm - Max. thickness: 2.5 mm (steel) Total motor power: 3 Kw Split tooling: standard + crowbar h : 110 mm

General SKU022E090 LocationBarneveld MakeRannie No.3505/62 Year of constructionunknown Main Features Motor1.5 KW Specified Features - Piston homogeniser MaterialStainless steel Piston homogeniser(1x) Number of pistons:3 Motor± 1,5 KW, 220/380 Volt Information With switchcheck Floorspace1,0x0,7 M Total height1,0 M Weight180 KGPiston homogenisersRannieMills > Piston homogenisersBrand > Rannie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU089F484 LocationBarneveld MakeRannie Homogenisator No.4255/68 Year of constructionunknown Main Features Motor2.2 KW Specified Features - Piston homogeniser Piston homogeniser(1x) Capacityunknown Twin stagecheck Number of pistons:3 Motor2,2 KW, 220/380 Volt MaterialStainless steel Information With switchcheck Floorspace1,1x1,0 M Total height1,1 M Weight420 KGPiston homogenisersRannieMills > Piston homogenisersBrand > Rannie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU406S1038 LocationBarneveld MakeBallerstaedt & Co. Rastatt (D) TypePOLYMAT-VARIOSEAL PN No.71.9615.011.1000 Year of construction1996 Main Features Inlet diameter90 mm Number of1 heads Specified Features - Capper MaterialStainless steel Single headcheck Suitable forplastic and glass containers Number of closing heads:1 Without motorcheck Manual operatedcheck CapacityDepending on the skill of the operator up to 700 sealing/h. Suitable for bottle/jar dia.90 mm Suitable for bottle/jar height375 mm Information With switchcheck Weight50 Kg Floorspace0,6x0,4M Total height1 MCappersBallerstaedt RastattPackaging machines > CappersBrand > Ballerstaedt Rastatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU397M477 LocationBarneveld MakeRannie Copenhagen No.1.92.215 Year of constructiononbekend Pressure Working pressure250 Bar Main Features Motor3 KW Pressure250 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogeniser(1x) Single stagecheck Number of pistons:3 Motor3,0 KW, 220 Volt (3 PH) Information With switchcheck Floorspace1,1x0,8 M Total height1,1 M Weight280 KGPiston homogenisersRannieMills > Piston homogenisersBrand > Rannie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU397M492 LocationBarneveld MakeVMI Rayneri TypeSupertest Air No.142652 Year of construction2006 Main Features MaterialStainless steel Length300 mm Specified Features - Stirrer Propellor stirrercheck Shaft length300mm Sizes stirring headdia. 70mm Pneumatic motorcheck With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel Information Mounted on framecheck With switchcheck With switchgearcheck Floorspace0,6x0,5 M Total height1,0 M Weight35 KGStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU299S435 LocationBarneveld MakeRapid (S) Type205-A No.25.5833 Year of construction1996 Main Features Motor4 KW Inlet diameter200 mm Width220 mm Specified Features - Granulator MaterialMild steel Rotor width225mm Rotor diameter180mm Open rotorcheck Number of rotor knives3 Inlet290x230mm (1x) , 400x280mm (1x) Hinged topcheck Motor4 kW 230/400 volt Feeding with screwcheck Motor1,5 kW 220-240/380-420 volt With fancheck Motor0,14 kW 220/380 volt Information Mounted on wheelscheck With switchcheck Weight400 Kg CEcheck Floorspace1,8x1,1 M Total height1,5 MGranulatorsRapidMills > GranulatorsBrand > Rapid What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU089F482 LocationBarneveld MakeRannie Homogenisator No.3423/61 Year of constructionunknown Main Features Motor0.75 KW Specified Features - Piston homogeniser MaterialStainless steel Piston homogeniser(1x) Capacityunknown Number of pistons:3 Motor0,75 KW, 220/380 Volt Information With switchcheck Floorspace0,9x0,7 M Total height1,6 M Weight220 KGPiston homogenisersRannieMills > Piston homogenisersBrand > Rannie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU292M361 LocationBarneveld MakeVMI Rayneri TypePIL.direct 15/750 VF No.75953 Year of construction1996 Main Features MaterialStainless steel Motor0.75 KW Length700 mm Specified Features - Stirrer MaterialStainless steel Propellor stirrercheck Shaft length± 700mm Sizes stirring headø 110mm Motor0,75 KW, 230/400 Volt With frequency controllercheck Speed mixing shaft100-808 rpm Mounted on supportcheck Adjustable heightcheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,1 x0,8 M Total height1,7 M Weight150 KGStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Plea ...

sheet thickness - max.: 1 mm Minimum duct dimensions: 100 x 100 mm bending speed: ca. 15 m/min duct size min.: bei 1 mm = 100 x 100 mm total power requirement: 2,2 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 5,5 x 0,65 x 1,1 m Video available on our website.: Machine still in the delivery factory: Electric 380 Volt: Foot switch: Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Built in 2004, with Hatz 13.2 kw engine, 85 cm working width, 1480 kg dead weight

Pressure tank with conical head and central outlet, additional tangentially mounted inlet/outle and manhole, upper dished head., Additional title: cylindroconical tank, Volume: 100 hl, Working pressure: 3 bar, Length: appr. 2,20 m, Width: appr. 2,20 m, Height: appr. 4,06 m, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, additional tangential inlet/outlet, manhole