r2 used for sale

Lobe Pump,stainless steel,APV-Crepaco R2R,0,75 kW,58-348 rpm.,Theo. cap 201-1210 l/h

Granulator/mixer,stainless steel,Blendex 4,open top,tiltable,variable speed.

Planet mixer,stainless steel,Bjørn type R27,Ø 340 mm.

Planet mixer,stainless steel,Maren type F45,4 gears and timer function

Double cone mixer,stainless steel,gearmotor

: R10-R260 : 210 ° bending speed: 2 U/min : 1 1/4 x 3,5 mm : einphasig - 230 V drive motor: 1,1 kW : < 70 dB weight of the machine ca.: 80 kg dimensions of the machine ca.: 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 : max. 210 ° : 54x2 mm : 42x2,5 mm : 42x3,5 mm : 30 mm bending speed: max. 4 U/min Amount of programms: 30x9 voltage: dreiphasig 220-400 V total power requirement: 1,1 kW dimensions of the machine ca.: 1000 x 410 x 570 mm weight of the machine ca.: 80 kg Accessories / equipment: - Machine structure: aluminum alloy - Base: welded steel - Standard accessories (including footswitch, operating instructions) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 2,0 KW rated current: 10/6,0 Ampere output voltage: 2 x 230AC / 1 x 12DC V weight of the machine ca.: 29 Kg dimensions of the machine ca.: 490 x 280 x 405 mm The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 2 x 3,91 mm ST tube diameter: 60 x 4,5 mm GAS revolutions per minute: 2,5 U/min radius: min. 2 x D mm bar material - diameter: 35,0 mm total power requirement: 1,5 kW weight: 130 kg Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis Bending segments on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 12 l engine output: 7,0 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm

Cell Berger with SChleif robot Kuka KR 180 (internal grinding I1) Grinding cell Berger 2012 (internal grinding I1) - Total weight approx. 6200 kg - Dimensions of the cell: approx. 4650 x 2400 x 2900 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) 2 x Polishing stations, Polishing disc diameter 350 - 600 mm Polishing disc width 100 mm - Power 5.5 kW

2 PIECES AVAILABLE Daikin EUWD80FSDY1 (2005) - Daikin EUQ100KXSDY1 (2002) Type of refrigerant R22

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.

rated capacity: 2,6 / 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 18 l engine output: 6,5 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal cylindrical grinding machne TACCHELLA ELEKTRA-Evo 1018 MPC - FANUC 21i MPC, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 180 mm, Distance between centres: 1000 mm, Wheel dimension: 508x80x203,2 mm, Wheel speed: 2000 rpm - Variable and programmable, Spindle motor power: 8,2 Kw, Internal grinding spindle speed: 30.000 rpm, Weight: 6.500Kg

Internal Device TACCHELLA 612 complete with spindle, dressing unit, Information about technical data are not binding., Machine available subject to prior sale.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92000 € : 1840 € : 8 mm : 5 mm : 80 mm : 10 mm : 4500 mm : 720 mm : 95 (R 80) / 35 (R 25) mm : 10 kW : 4900 mm : 1700 mm : 2700 mm : 4550 kg incl. flanging rolls for mild steel (R25) incl. cutting blade hydraulically adjustable carrier from top to bottom cutting and flanging on the same head lateral support rolls Operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 50000 € : 1010 € : 6 mm : 4 mm : 50 mm : 4000 mm : 440 mm : 4 kW : 4250 mm : 900 mm : 2240 mm : 2050 kg Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. (R25) One set of cutting blades included 2 speed part carrier (7-14 m./min) and one speed rotation cutting system Top and bottom flanging rolls powered in rotation with planetary reducers Manually adjustable sheet centering for both flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Bakery baked goods freezer cabinet -Bakery freezer Profi-Line ventilated -Manufacturer : Liebherr -Model: BGPv 8470 Index 41A / 001 -for 60x80cm sheets and also 60x40cm -Class: T (5) -Gross capacity: 856 liters -Refrigerant: R290 -4.0 A 220-240 V 50Hz -External dimensions approx.: 80x94x218cm WxDxH

Inv. Num. : 6409 Type: KDC-N24 R2T Producer: KISUN Generated: 2018 Parameters: Electrical connection: 240 V Power consumption: 21 kW Compressed air: 6 bar Length: 6120 mm Width: 1070 mm Height: 1370 mm Equipment: Loader Termo Air Dryer Uv Spare screen cylinder and doctor blade chamber Discharger format: 610 x 750 mm (B2) Minimum. Size: 297 x 420 mm (A3) Paint layer height: 6-14 microns Painted material thickness: 120-400 g/m2

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used vacuum packer Multivac R245. New 2018.

Surface Grinding Machine FAVRETTO MB100, 1000x500 mm, magnetic plate, Auto-control CN, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1000x500 mm, Working table size: 1000x400 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 450 mm, Clearance between worktable and spindle axis: 750 mm, Feed rate x axis: 2 - 40 m/1, Feed rate y axes: 0 - 5 m/1, Wheel speed: 1400 rpm, Wheel dimension: 400x127x50 mm, Spindle motor power: 9 Kw, Nc: Auto-Control FAVRETTO, Weight: 6.000 Kg, Accessories: Electro permanent magnetic plate, coolant tank with paper filter, dresser (U Axis)

Manufacturer: Lu-Ve Type: HCE 58 (LH) CU/AL Overall dimensions: 2350 x 1130 x 835 mm Fan diameter: 700 mm Fan electric power: 470 W Fan voltage: 230 V Refrigerant Type: R134A - R404A- R22 Refrigerant volume: 18.88 dm^3 Maximum pressure: 3 MPa

Asynchronous motor, servo motor, with forced fan ELBTALWERK ACHA 132.4-6 ( ACHA 132.4-6 ) 4,5 / 7,5 / 7,5 / 3,6 kW 430 / 690 / 1605 / 2805 rpm 255 / 400 / 400 / 400 V 3AC 23 / 36 / 84 / 143 Hz IP 54 Shaft diameter: Ø 42 mm Wavelength: 110 mm Groove width: 12 mm Flange: Ø 250 / 256 x 256 mm bolt circle diameter: Ø 300 mm hole diameter: Ø 19 mm motor base: 355 x 260 mm hole spacing (parallel to the shaft): 317,5 mm hole spacing ( transverse to the shaft ): 215 mm hole diameter: Ø 11.5 mm forced fan: R2D 220 AC 02-12 ( R2D 220 AC 02-12 ) 0,08 kW 2540 rpm 400 V 3AC New ! Dimensions: 740 x 355 x 345 mm

Hydraulic pump with motor ECKERLE HYDRAULIK 3-19 633 ( 3-19633 ) Motor Schabmüller R210/18RFK Engine: 18 kW 2825 rpm 80 V Dimensions 620 x 300 x 300 mm

Centrifugal fan, external fan with bracket EBM PAPST R2D190-AC08-09 n: 2500 rpm Motor : 43 W 415 V New ! Dimensions: 380 x 260 x 85 mm

Multiple light beam safety sensor, light barrier LEUZE ELECTRONIC MLD500 Transmitter: MLD500-T2L 66502100 Receiver: MLD510-R2L 66536100 Range: 0,0,5 - 50 m Number of beams: 2 Beam distance: 500 mm Current consumption: 50 mA ( transmitter ) / 150 mA ( receiver ) 24 V DC IP 67 2x connection cable ( approx. 0.14 m, approx. 10.0 m ) used, tested ! Dimensions ( single ): 600 x 52 x 65 mm

Geared motor with inverter SEW R27DT80K4/MM05/BW1/RE1A/AMD6 MOVIMOT MM05C-503-00 0,11 / 0,55 kW 14 - 280 rpm 380 - 500 V IP54 shaft diameter: Ø 25 mm with control (MOVIMOT) ! used, checked ! Dimensions: 450 x 260 x 210 mm

Gear motor with brake SEW, VECTOR R27 DT80K4 ( R27DT80K4 ) 0,55 kW 87 rpm 220 - 240 / 380 - 415 V IP54 shaft diameter: Ø 25 mm used, tested ! Dimensions: 450 x 200 x 160 mm

Air heat exchanger, control cabinet fan EBM R2E180-AT38-10 2 x 85 W 220 V Dimensions: 1820 x 480 x 120 mm

Gear motor, variable, adjustable STÖBER 0,75 kW 6,6 - 46 rpm Motor: HEW Type EEXF 80L/4 ( EEXF80L/4 ) 0,75 kW 1380 rpm 230 / 400 V 3AC gearbox: R27/VW3-1040-075-4 shaft diameter: Ø 38 mm Flange diameter: Ø 250 mm spare part for woodworking machine VENJAKOB VPG 1300x25 ! used, tested ! Dimensions: 700 x 380 x 270 mm

Gear motor, variable, adjustable STÖBER 0,75 kW 6,6 - 46 rpm Motor: HEW Type EEXF 80L/4 ( EEXF80L/4 ) 0,75 kW 1380 rpm 230 / 400 V 3AC gearbox: R27/VW3-1040-075-4 shaft diameter: Ø 38 mm Flange diameter: Ø 250 mm spare part for woodworking machine VENJAKOB VPG 1300x25 ! used, tested ! Dimensions: 700 x 380 x 270 mm

Gear motor variable / adjustable GETRIEBEBAU NORD SK.5080A/33-R210 U SHR-112 ( SK.5080A/33-R210USHR-112 ) 4,0 kW 8 - 58 rpm adjustable by means of handwheel motor: EMOD EeDF112/4 380 V 3AC 50 Hz IP55 spare part for wood sanding machine PAUL ERNST KKB/K VBS1300x2500 ! used, checked ! Dimensions: 780 x 500 x 600 mm

Pressure relief valve, pressure relief valve, fixed BOSCH, REXROTH 0 532 001 039 ( 053200 039 ) R295 691 set pressure: 25 bar ( not adjustable ) max. pressure: 350 bar Thread: M30 x 1.5 New ! Dimensions ( pressure relief valve ): 92 x 35 x 30 mm Dimensions ( packaging ): 95 x 47 x 43 mm

Centrifugal fan, centrifugal fan, centrifugal fan EBM PAPST R2E180-AS77-40 impeller: Ø 180 mm Motor : 0,082 kW 230 V 2300 rpm New ! Dimensions: 185 x 185 x 85 mm

Screw drive, drive unit ULRICH ANLAGEN- UND MASCHINENBAU GmbH UFS 90-68-6-12 Speed: 674 rpm Pipe inner diameter: 84 / 150 mm Gear motor: SEW R27F DRE100M2/TF/LN 2,2 kW 674 rpm 220 - 242 / 380 - 420 V 3AC 50 Hz IP54 New ! Dimensions: 1100 x 480 x 260 mm

Screw conveyor drive, drive unit ULRICH ANLAGEN- UND MASCHINENBAU GmbH UFS 90-68-6-12 Speed: 139 rpm Pipe inner diameter: 84 / 150 mm Gear motor: SEW R27F DRE90M4/TF 1,1,1 kW 140 rpm 220 - 242 / 380 - 420 V 3AC 50 Hz IP54 New ! Dimensions: 1050 x 480 x 260 mm

For sale Makino 5-axis SImultan machining center type D500, equipped with a Fanuc 310iS (Profesional 5) controller including Makino robot system. Very nice 5-axis simultaneous machining center type D500. X-axis movement: 550 mm Y-axis movement: 1000 mm Z-axis movement 500 mm A-axis: 150 degrees (+30 degrees to -120 degrees) C-axis: 360 degrees continuous Complete with Makino robot system. It is a Fanuc 6-axis robot type R2000iB/165F including rack magazine Makino VIP with 45 positions

TRANE CHHB100DKM0N120A Brand:TRANE Type:CHHB100DKM0N120A Stock number:M23-1355 Cooling capacity:253 kW Displacement:343 m³/h Refrigerant:R404A, R134a, R22 Voltage:400 Volts Motor power:131 kW Dimensions:1200 x 800 x 800 mm Weight:541 kg Year:2015 New/unused Number in stock:1 piece(s) Price: On request Description: New unused Trane screw compressor. Mentioned capacity at an evaporating temperature of +3°C and a condensing temperature of +50°C, subcooling +12°C and superheat +3°C. Visit also our website: used-refrigeration

Transnorm Rising falling Incline with arch belt conveyor GF 10540-600-500 RA2104 Technical data: Conveyor length (NL): 10540 mm (10040 mm incline + 500 mm arch) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 10540 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven ...

Transnorm conveyor belt GF 22980-700-600 RA2064 Technical data: Conveyor length (NL): 22980 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 22980 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s:  ...

Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Transnorm Rising falling Incline with arch belt conveyor GF 15670-900-800 RA2086 Technical data: Conveyor length (NL): 15670mm (14870 mm incline + 800 mm arch) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 15670 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: ...

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Transnorm conveyor belt GF 21730-700-600 RA2090 Technical data: Conveyor length (NL): 21730 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 21730 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s:  ...