r s used for sale

Pneumatic cylinder REXROTH 523 407 010 0 stroke: 50 mm rod diameter Ø 25 mm Dimensions: 330 x 100 x 160 mm

Pneumatic cylinder REXROTH 523-407-005-0 stroke: 25 mm rod diameter Ø 25 mm New ! Dimensions: 250 x 100 x 100 mm

Pneumatic cylinder REXROTH 523-507-025-0 stroke: 125 mm rod diameter Ø 25 mm New ! Dimensions: 370 x 125 x 125 mm

Pneumatic cylinder REXROTH 523-307-050-0 stroke: 250 mm rod diameter Ø 20 mm New ! Dimensions: 450 x 80 x 80 mm

Pneumatic cylinder REXROTH 5232070400 stroke: 200 mm rod diameter Ø 20 mm New ! Dimensions: 380 x 65 x 65 mm

Pneumatic cylinder REXROTH 523 107 010 0 stroke: 50 mm rod diameter Ø 16 mm New ! Dimensions: 260 x 55 x 55 mm

Pneumatic cylinder REXROTH 5234070050 stroke: 25 mm rod diameter Ø 25 mm New ! Dimensions: 250 x 105 x 105 mm

Pneumatic cylinders, double-acting REXROTH 523 203 010 0 stroke: 50 mm Piston diameter: Ø 50 mm Rod diameter: Ø 20 mm Rod thread: M16 x 1,1,Br 5, Length: 28 mm pmax: 10 bar 2 8940410612 1x clevis: width ( inside ): 10 mm, bolt diameter: Ø 16 mm 2x mounting foot: 63 x 45 mm hole spacing: 219 / 45 mm hole diameter: Ø 9 mm New ! Dimensions: 335 x 80 x 102 mm

Control cabinet, baying system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors without side walls can be combined with S377 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm

Control cabinet, baying system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors one side wall can be combined with S376 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm

Check Valve, Hydraulic Valve REXROTH Z1S 6 P1-33/V SO90 ( Z1S6P1-33/VSO90 )

Check valve, check valve set REXROTH 5340981300 G1/2 0.5 - 15 bar Check valve set consists of 5 check valves ! New ! Dimensions (single valve): 66 x 30 x 27 mm Dimensions: 150 x 70 x 30 mm

Cutting Wheel Set RIDGID E-1032 Diameter: 38.6 mm Cutting Depth: 11 mm Cutting Wheel Set consists of 6 cutting wheels ! New ! Dimensions(Packaging): 80 x 60 x 45 mm

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

Encolleuse Bürkle RCG 700 Bürkle RCG 700 2017 Find more here - /

IGM-Welding-Station IGM Robot Designation: Rti 330 Year of construction: 2005 1st welding unit Manufacturer: Fronius Hoist no.: 4,0750,100 Designation: Transpuls Synergie 4000 2nd welding unit Manufacturer: Fronius Hoist no.: : 4,075,097,R Designation: Transpuls Synergie 4000 Extraction system Manufacturer: Füchtenkötter Designation: FKPF 64/4 V Year of construction: 2005 Find more here - / Contact us at -

2012 Wachter Rotar 60 Back-up fuse: max. 65A Designation: Parts cleaning system E-connection 3x40v/50Hz Find more here - / Contact us at -

2012 Wächter ROTOR 60-2-Bad -- WACHTER CLEANING SYSTEMS Machine: Feeding height 9 5 0 m m Basket usable size LBH 600 x 400 x 300 mm width 1 300 mm Depth 1 600 mm Height2 200 mm ( other dimensions possible) 5. heating: Washing coils 6. drive Rhonrad: 7. belt skimmer drive 8. vapour condenser 9. Pneumatic lifting door 1 O. Automatic water level regulation 11. stainless steel basket with clamping cover VA 600x400x300mm. Mesh 6x6mm Oatum: 13.03.18 15kW 7,5kW 0,12 kW 0,04 0.45kW Basket optionally rotated, swivelled or without movement. Control system:SPS Kloeckner EASY Find more here - / Contact us at -

3X Identical Steam Turbine sets Each steam turbine set is a complete system except the boiler for the steam generation. If sufficient water vapour is already available from another source, this can also be used. In this case, a boiler is no longer required. The three sets have never been run (like new), however, this sets are already more than 10 years old (year of production 2009). The project for which this sets were purchased has never been implemented. The steam turbine sets are running on 60 Hz. Depending on the country, where the steam turbine sets should be used, they may have to be converted to 50 Hz (replacing the gearbox and the clutch of the generator). This is possible and can be done by experienced companies. We can recommend a German company that has extensive experience in the errection and maintenance of this type of steam turbine. The unused steam turbine sets are pa ...

1994 Niemeyer RWE 13 – SF 7/002 D Shaft manufacturing plant Find more here - / Contact us at -

The Test Research Inc. (TRI) TR7550, introduced around 2010, is an Automated Optical Inspection (AOI) system designed for high-speed, inline inspection of printed circuit boards (PCBs) in electronics manufacturing. It utilizes a top-view 3-CCD color camera and four angled cameras to optimize test coverage, employing TRI´s dynamic imaging technology to minimize vibrations and provide accurate, stable inspections before and after reflow soldering processes. Key features of the TR7550 include: - High-Speed Inline Color AOI: Ensures comprehensive inspection coverage. - Precise 3-CCD Color Camera: Capable of inspecting 01005 fine-pitch components. - Advanced RGB+W Lighting System: Enhances detection of solder and markings. - Linear Motor X-Y Table: Provides vibration-free, accurate inspection. The system is suitable for inspecting various component defects such as missing components, tomb ...

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Hackeranlage hacker Rudnick Enners 500 200 motor 45kw 500mm 200mm vibrorynne detecktor metau scratch conveyor technology

:::TECHNICAL SPECIFICATIONS::: Hydraulic machine: yes - X-axis travel: 750mm - Y-axis travel: 500mm - Spindle rpm: 1450 Other technical data: Table distance - spindle axis 620 mm Table dimensions: 700 x 500 mm - Machine equipment: magnetic table :::D DIMENSIONS AND WEIGHT::: Length: 2500mm Width: 2000mm Height: 2000mm Weight: 3800Kg

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Machine name: Inversion system for liquid polymers Manufacturer: Reiflock Type: Reifomat 500 Year of Make: 1999 Conveying / Dosing of: Liquid Polymers Capacity: Polymer flow: 0.12 - 2.5 l/min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Curb weight: Approx. 120 kg 2Ygvwomvc Tech. Documentation: Yes Note: Achievable flocculant concentration: 0.07 – 2.5 % Electrical connection: 380 V / 16 A connected load: approx. 2.2 kW Condition: Used Price: On request

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

Directly from the manufacturer, the original from Apfel GmbH. Fully assembled included 2 shelves KRB 4700 1 storage box KEN 6422 (No. 62) 2 storage bins KEN 4322 (No. 42) 1 zinc sheet trash can 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Payload: 400 kg Dimensions: 512 w x 1,952 h x 772 d Structure powder-coated in black-grey RAL 7021 (carcass) Various designs and special solutions possible, we as a manufacturer support you in your wishes! (See pictures 3+4)

Manufacturer: BHS Model: RBG06 Year of Manufacture: 2016 Type of Machine: Biomass Granulator 45 kW Find more here - / Contact us at -

Straight and cut machine Wafios R31 Diameter: 1-5mm – 7mm MY: 1993 – working condition Machine Number: 26106224 Extension length: 2m or 6m available Pay-Off: not available, we can offer separate for 3t. Mechanically refurbished Electrical checked Machine is in working condition

with 10 closing stations, capacity: 12,000 bph

Resonance screening machine / feed chute with perforated sieve Workshop overhauled and tested

TURBOCHARGER ABB RR151-14

TURBOCHARGERS RR151-14

Standing stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³ Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

PART NUMBER: 7540 Specifications: - max disc diameter 350mm - spindle diameter 30mm - up/down adjustable dial - electric brake - shield guard - max cutting height for the blade 350mm - 100mm - min saw spacing 250mm - max saw blade spacing (edge saw blade spacing) 2500mm - max cutting length 2170mm - electric saw spacing - with a scorer - max scorer disc 130mm - spindle diameter 20mm - power of the scoring motors 2×0.75kW - main motor power 2x4kW - bottom bracket motor power 0.37kW - 2 types of rotation speed 3000,4500 rpm - extraction spigot diameter 2x120mm, 2x80mm - total dimensions length/width/height 4500x3000x1600mm - weight about 1100kg Advantages: – Polish production – electric saw spacing – DTR documentation – very good condition – used double saw Net price: 32900 PLN Net price: 7651 EUR depending on the price 4.30 EUR (Prices ...

Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).

SNA-10. 2 Emergency Power Systems - Complete System Manufacturer: Heinkel Aggregatebau GmbH Technical Data: - Heinkel SET HE500/396; 500 kW; 400 V; 722 A; 1500 rpm - IP 20, brushless synchronous machine AEG Rotaduct - 2 units Type DKBH4407/04; 3-phase AC; 280 kW; 400 V/404 A, 50Hz - 1500 rpm; 50Hz; cos φ 0.8; Built: 1991 - Diesel generator by MTU, Diesel tank: 1 unit, capacity: 1425 l - Starter battery; 2 units Hoppeke power HC 125300 - Dry cooler by Alfa Laval; 2 × 6 fans; 793.52 kW; each 50 m³/h - Ventilator: 90460 m³/h; Two-circuit cooler; Rooftop installation Find more here - / Contact us at -

SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication

Used steam boiler made by Rumia type Eko with a capacity 1000 kg of steam per hour and pressure of 10 bar. New 1997. 2 pieces available. The boilers will have UDT tests.

line for croisants

Stirring Machine/Stop Machine for approx. 40l Stirring and beating selectable Speed and deflection infinitely adjustable with digital control incl. whisk coarse and fine incl. 3 boilers

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

Surface grinding machines with rotary table and horizontal grinding spindle Table dia: 700 mm Table can be inclined! High accuracies Rigid casting design Hydrostatic guideways in the X-axis and the rotary table Outstanding long-term precision and longevity Ergonomic and easy to operate compact and space saving design Best damping properties Direct, wearless drive in the rotary table

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...

used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h