r s used for sale

-electrically heated, heat output approx. 70 kW for temperatures up to 200 C -Titanium control

Coin Counting & Sorting Machine Manufacturer: REIS Type: CS 3310 So. Specifications: Machine dimensions: approx. width 662 mm x depth 305 mm x height 575 mm Net weight: approx. 35 kg Sorting capacity: approx. 600 coins/min. Coin funnel volume: approx. 700 coins (10 cents) Volume of collector's cassettes: approx. 1000 coins (10 cents) Coin Recognition: RCDS Acceptance: All euro coins Function checked / machine ready for immediate use! Condition and accessories see original pictures! If you have any questions, email or call. 03423-706493

Key data: 410 mm, 2 St.

Loading table each 1200 mm, 4 Kw, weight approx. 500 kg

Sheeting machine FRITSCH, type: Rollfix 60 / 650 E -Refurbished- - New Operating Panel - New frames for control - New drip plates with plastic guides - Digital control - on castors - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

RAIMANN KR 310 M ProfiRip Board measurement with automatic saw blade adjustment Optimization for the best possible width distribution Quality division of the boards Workpiece data max. cutting width 310 mm Total passage width 800 mm max. cutting height with blade adjustment without pressure screen 115 mm max. cutting height with multi-blade adjustment without pressure screen 130 mm with pressure screen 115 mm min. cutting height 10 mm min. workpiece length 740 mm Pull-out roller / top pressure roller Locking pressure screen Pneumatic pressure rollers Machine data 2-fold saw blade adjustment 4 x Laser Directional Light Cutting Indicator Control model Proficut with Siemens PC Simatic touch panel Control panel mobile Transport chain with spikes – width 340 mm Automatic chain lubrication with oil level monitoring Diameter saw shaft 65 mm Diameter of socket 80  ...

- Type: RS 10 (Rotoscreen) - Year of construction: 2003 - Consisting of a fixed and a movable slat grille - Material: stainless steel

Line for laminating and cutting dough

Key data: 45 °, 3500 mm, 1350 mm

Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table

mobile, with lockable castors Table size 2000 x 1550 mm swivel horizontal-vertical Extension to height-adjustable possible on request

Spiraleindrehmaschine - Spiral insertion machine Renz DPST Year 1979 - Serial-No. 4015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Ryobi 2700 Size min. 90 x 130mm - max. 305 x 432mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Elektrische Hochleistungs-Schneidemaschine / High Speed Wire Cutting Machine RENZ HSC-E Baujahr / Year 12/2011 - Serial-No. 460007150.50107 Schneideleistung bis / Cutting capacity max. 3000 Stück/h Schneidelänge 3 - 99 Schlaufen, variabel einstellbar Cutting length 3 – 99 loops, variable adjustable Stückzahlzähler ja / Piece counter yes Verarbeitbare Durchmesser / Possible wire diameters 3/16" - 1 1/4" ( 5,5 - 32 mm ) Teilung / Pitch 2:1, 3:1, 4:1 Umrüstzeit von Durchmesser zu Durchmesser / Time required for diameter change 2 - 10 Min. Spannung Power supply / 230 V / 50 Hz Maße / Machine L110 x W82 x H100 cm Gewicht / Weight gross 74kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Rotaprint R 45 K Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Manuelle Winkelverpackungsmaschiene / Semi-Automatic Foil sealing machine ROBOPAC Micra M Year 2002 - Serial-No. 21037 Produktabmessungen / Product sizes Abmessungen der Schweißleisten (LxB) 540x390mm Produktionsleistung 300Produkte/Std. / Production 300pcs/h Elektrischer Anschluss / Power supply: 230V 1Ph 50/60Hz(V) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Perforation - Scoring - Slitting System Rollem Champion 990 with Eurofold Year 1994 - Serial-No. E1088/530 Perforation - Scoring - Slitting System Arbeitsbreite / Working width max 470mm Flachstapelanleger EUROFold / with Flatpile Feeder EUROFold Stufenlose Geschindigkeitsregelung / stepless speed regulation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kreuzleger - Stacker CMC ROBOT 300 PMC Year 1994 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...

Pump with motor Pump Manufacturer: Habermann Type: RPL 54/7.1 Year of Make: 1988 Engine: Manufacturer: ABB Type: 8995751T06 18.5kW The pump is in good condition. Connection piece for filling the pump is torn off. see pictures for more details.

Screw compressor Manufacturer: GHH Rand Model No.: CS80/3 Speed range: 2000 - 2950 Max. volume flow: 710 m³/h at max. working pressure 2.5 bar max power consumption 48kW The compressor is in good condition. Signs of use are present. for more details see pictures

5 rollers straightening machine, Diameter of leveling rollers 40 mm, Belt passage 350 mm, a D80 mm feed roller with pneumatic pressure, Infeed roller basket Control cabinet, Connection cable with CEE connector 16A.

Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t

REIS TUS 115 OK 100 Die Spotting Press pressure 100 t table surface area 890 x 1280 mm ram surface 1000 x 1200 mm distance between columns 1250 mm stroke 1035 mm distance table/ram, max. stroke up, adjustment up 1035 mm side window 700 mm table height over floor 630 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11 t Dimensions (WxDxH): 2,1 x 3,8 x 3,9 m swiveling ram movable table table - tiltable ram interlocking hydraulic ejector in table

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4" Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes but the machine is sold with new tapes. - Belt width 64cm - with reel - With digital computer control

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1000x1000 mm number of T-slots: 8 flute distance: 45 ° T-slots: 18M16 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Side channel blower EG&G ROTRON DR068DJ9Y Flow rate: 21.6 m3/h 75 Watt 110 / 220 V (luminous flux) Dimensions: 220 x 190 x 180 mm

Vacuum pump, side channel compressor, side channel vacuum pump, with suction filter RIETSCHLE SKG 314-2.02 ( SKG314-2.02 ) ports: 3 ( inches ) motor: 4.0 kW 2850 rpm 230 / 400 V 3AC 50 Hz IP54 intake filter: MANN 45 138 77 126 used, checked! Dimensions: 880 x 670 x 420 mm

Control cable, servo cable REXROTH IKS4153 INK0448-01 10 m New ! Dimensions: 340 x 340 x 50 mm

Control cable, servo cable REXROTH IKG4016 INK0653 16 m New ! Dimensions: 380 x 380 x 90 mm

Control cable, servo cable REXROTH IKG4016 INK0653 10 m New ! Dimensions: 360 x 360 x 70 mm

Control cable, servo cable REXROTH IKG4016 INK0653 13 m New ! Dimensions: 380 x 380 x 60 mm

Control cable, servo cable REXROTH IKG4077 INK0602 20 m New ! Dimensions: 450 x 450 x 80 mm

Hydro-electric piston pressure switch REXROTH HE D1 KA 40/100 ( HED1KA40/100 ) max 460 V 15 A Dimensions: 200 x 95 x 45 mm

Pressure switches REXROTH HED 8 0H 20/50 K14 S ( HED80H20/50K14S ) R901102712 Pv = 5...50 bar Pmax = 350 bar Dimensions: 90 x 90 x 40 mm

Pressure switches REXROTH HED 8 0H 20/50 K14 ( HED80H20/50K14 ) R901102349 Pv = 5...50 bar Pmax = 350 bar Dimensions: 90 x 90 x 40 mm

Pressure switch REXROTH HED 4 0A 15/100 Z14 ( HED40A15/100Z14 ) Pv = 10...100 bar Pmax = 350 bar lockable ! Dimensions: 160 x 90 x 40 mm

Pressure Switches REXROTH HED 8 0A 12/100 K14 536027 Pv = 10...100 bar Pmax = 350 bar Dimensions: 120 x 80 x 40 mm

Pressure Gauge Selector, Multi-Stage Gauge Insulator REXROTH MS7A2.1 8 steps Dimensions: 150 x 90 x 90 mm

Pressure Switch REXROTH HED 1 KA 40/100 ( HED1KA40/100 ) R900383852 100 bar 460 V AC 15 A 125 V DC 0.4 A New ! Dimensions 200 x 100 x 45 mm

Check valve REXROTH Type S S62F1-10/SO6 42163 Opening pressure: 0.5 bar Pmax.: 315 bar Vmax.: 3000 l/min New ! Dimensions: 170 x 120 x 160 mm

Pressure Gauge Selector Switch, Multi-Stage Gauge Insulator REXROTH MS2A2.0/180/2610 RN 176.99Bl.1 6 steps used ! Dimensions: 130 x 120 x 120 mm

Gauge Shut-off Valve REXROTH Type AF6 Af6EA 3.2/V max. 300 bar New ! Dimensions: 95 x 55 x 60 mm

Check valve BOSCH REXROTH S15A1.0 R900420537 pmax.: 315 bar G3/4 New ! Dimensions 90 x 42 x 36 mm

3D Probe for CNC Machine Tools RENISHAW MP3 with accessories Size: SK30 Dimensions: 330 x 210 x 130 mm Weight: 2.5 kg

Directional Control Valve, Pneumatic Valve YPC SIV443-IP 2 - 10 bar 220 V 50 Hz New ! Dimensions: 150 x 100 x 45 mm

Ball valve, shut-off valve REXROTH 0821300911 16 bar G 1/2 function 3/2 New ! Dimensions: 105 x 70 x 70 mm

Pneumatic cylinder with locking cylinder REXROTH 524 999 784 0 stroke: 125 mm rod diameter Ø 24 mm with locking cylinder 523 599 640 2 Dimensions: 650 x 120 x 180 mm