r s used for sale

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TM Year 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition

4 Farben Offsetdruckmaschine / 4 Color Sheet-Fed Offset Press Ryobi 3304H Baujahr / Year 1999 - Serial-No. 1532 Size max. Size 340 x 460mm Feuchtwerk / Dampening System VARN Compac Bedienpult / Console for ink and register PCS-F Automatische Wascheinrichtung / Automatic washer for roller and blanket Verchromte Cylidner / Chromed cylinders Puderapparatt / Power spray Kompresor / Compressor Guter Zustand / Good condition.

Elektrohefter  - Electric Stapler Nagel Rinak für Block- und Sattelheftung / for flat block - saddle stapling Neu unbenutzt / brand new Year 04/2021 - Serial-No. 3551000 Blockheftung: bis 4 mm ca. 40 Blatt (80 g-Papier) Broschüren: bis 3 mm ca. 30 Blatt (80 g-Papier) Heftklammern: 26/6, 26/8S, Ri 26/6 Anlagetisch lässt sich durch einfaches Kippen zur Block oder Sattelheftung umstellen Heftkopf-Schlagstärke einstellbar verstellbarer Seitenanschlag Auftischmaschine zur Befestigung an der Tischplatte Kapazität Klammermagazin: 210 Stück Einlegetiefe: 30 mm (bei Blockheftung) Anschluss: 230 V / 50 Hz Maße: B540 x T370 x H360 mm Gewicht (netto): 16 kg

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Serial No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-rigid profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 k ...

Stainless steel tank, capacity 1200 litres Manufacturer: REIMELT Beam agitator, power 2.2 kW Ladder single-walled, hinged lid Outer diameter: 1,260 mm cyl. Height 1,000 mm Total height without agitator 1,750 mm Total height with agitator 2,300 mm

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

pressure: 60 t stroke: 60-80 mm no. of strokes: 60-300 Hub/min weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...

Separator - S+S Rapid Vario FS70 Year of Make: 2011 Location: Lodz, Poland Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air

Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with

A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.

A Zippel single-chamber cleaning system is available. Number of containers: 2, container volume: 300l, usable volume: 600l, usable height: 850mm. On-site inspection is possible.

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.

From old stock unused power sensor Hewlett Packard R8486A

From old stock HP Power Sensor unused !

A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible.

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.

26,000 litre milk tank / agitator tank / storage tank made of V2A Properties: Volume 26000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Cylinder height 4500 mm Diameter 3400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Topsoil: Clapper bottom 2 crane eyes Level measurement 1/2" CIP line with CIP cleaning Tank cylinder: Manhole 450 x 370 mm Agitator mixer Stelzer type SN-63 H D2 - side with propeller (for tank ST2 right, for tank ST1 left) Socket 1/2" Subsoil: Clapper bottom with foot ring Outlet surround with flange connection Sensor for level measurement Important note: The agitator installed here contains a seal that must be protected from dry running.

40,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 40000 L Material V2A (AISI 304) 1.4301 Insulation 100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6300 mm Cylinder height 4500 mm Diameter 3900 mm Number of feet 6 Description: Topsoil: Curved bottom 2 crane eyes CIP ball on the side Level measurement with socket 1/2" Agitator agitator decentralised with 4 paddle stages Manhole Ø DN 440 Breathing nozzle Ø 700 mm with condensation drain 2 x CIP Ball Subsoil: Flat bottom with small cone bottom at the front forward-drawn residual drain pipe with flanges DN80 6 tube feet with spherical plates - height adjustable with base plate

30,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 30000 L Material V2A (AISI 304) 1.4301 Insulation 60 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3700 mm Diameter 3900 mm Number of feet 4 Description: Topsoil: Curved bottom CIP Ball Guiding Beam CIP Ball Sensor for level measurement Threaded Socket DN65 Stick Agitator Mixer with Propeller Manhole Ø DN 480 Ventilator DN 300 Tank cylinder: Tasting tap Subsoil: Cone base Outlet surround with disc valve DN80 Sensor for level measurement 4 profile feet with domes - height-adjustable with base plates

800 litre cleaning tank/ storage tank made of V2A Properties: Volume 800 L Material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm Inner diameter 1000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Last Use: Chemical Industry Description: Topsoil: curved bottom Threaded Socket DN 65 Manhole DN 400 Agitator with steam heating inlet Tank cylinder: Beading Subsoil: Cone base screwed on with pedestal forward-drawn residual drain pipe with disc valve DN 50

Turntable diameter: 150mm, max. pallet dimensions X/Y: 800mm/1200mm, max. product height: 2200mm, max. load capacity: 2000kg, rotation speed: 10rpm, lifting/lowering speed: 4m/min, film roll width: 500mm, max. film roll diameter: 300mm, film core diameter: 76mm, max. roll weight: 20kg, film thickness range: 17µm-35mm, machine weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller year of construction:2008 Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

3,000 litre agitator tank made of V2A Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 3500 mm Cylinder height 2000 mm Inner diameter 1350 mm Width 1500 mm Number of feet 3 Vertical design Last use of additives Description: Topsoil: Inclined cone base Level measurement Filling line pulled down Thermometry CIP Ball Manhole Ø 450 mm Agitator with propeller Ventilator Ø 350 mm Tank cylinder: CIP ball at the bottom of the agitator propeller Agitator type R132S - 8/4 PRG motor. No. 82/495 Flow breakers around propellers Perforated Pipe Tube Subsoil: forward-drawn residual drain pipe with disc valve Thermometry 3 trumpet feet with dome height adjustable with stiffeners on the legs and bottom

16,000 litre milk tank/ agitator tank / pre-stacking tank Properties: Volume 16000 L Material V2A (AISI 304) 1.4301 Total height 3500 mm Cylinder height 2800 mm Inner diameter 2900 mm Outer diameter 3100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Tank was used for the pre-stage of finished product. Topsoil: Inclined cone base 2 crane eyes CIP Cleaning Vent nozzle Thermometry Tank cylinder: insulated 6 cm Manhole 450 x 350 mm Agitator mixer Stelzer type DRK6P/12 with propeller CIP ball under the agitator Thermometry Level measurement Subsoil: Flat bottom with 3% slope Residual drain pipe with flanges Motor Tank 1/4 - Agitator to the left of Manhole Agitator Mixer Stelzer Type DRK6P/12 No.39139 IP44 Re Art. S1 7.571.5 kW 970/480 rpm 50 Hz 380 V YY/Y switch. 16 ...

For sale is a V-cooler of the brand Güntner Year of construction 2020 L= 4700 mm W= 1500 mm H= 1900 mm G= approx. 1.6 to Power 350 KW Admission 86° Outlet 72° Volume flow 23 m³ / h Price € 14,500 + VAT little run Very good condition

Key data: 3 mm, 3000 mm, 130 m/min

One used Ravni starigtening and cutting machine for 3.0 to 8.0mm wire. Cutting length: 3.000mm Machine is equipped with double pay off for 3 t spools and dust abstructor Year: 2014

Key data: 3190 mm, 6 mm

Note: Machine is currently still being revised, the illustrations were made before the Revision. Sheet width: 3190 mm Sheet thickness steel: 6.3 mm Colour: grey Total power requirement: 18.5 kW Machine weight: 6800 kg Dimensions: 3830 x 3820 mm with cutting gap adjustment Stroke rates per minute: 30 - 50 strokes/min Angle stop: 1500 mm Throat: 5 - 1000 (1500) mm

Technical data for the pallet racking system: Shelving system: Vogelsang Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 13,920 mm Number of fields per row of shelves: 05 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, new Material colour: sendzimir galvanised Profile dimensions: P 70 x 80 x 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,200 mm Depth: 1,100 mm 20x Pallet rack crossbar, used Material colour: orange Box profile: 110 x 50 mm Agraffe: ...

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 36,300 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 06 pcs. The scope of delivery includes: 10x pallet rack stand, new Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 108x Pallet rack crossbar, used Material colour: yellow Box profile: 160 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,900 mm 216x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 40x bolt anchors, new Manufacturer: Hilti Type desi ...

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 36,300 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 06 pcs. The scope of delivery includes: 10x pallet rack stand, new Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 108x Pallet rack crossbar, used Material colour: yellow Box profile: 160 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,900 mm 216x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 40x bolt anchors, new Manufacturer: Hilti Type desi ...

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 40,300 mm Number of fields per row of shelves: 14 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 21 pcs. Pallet spaces per rack row: 294 pcs. Total pallet spaces: 294 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 400 kg The scope of delivery includes: 15x Pallet rack stand, used Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 168x Material colour: RAL 1007 d ...

Twin-shaft multi-blade saw Raimann Type KD 31 Year of Make: 1981 Chain width 340 mm Cutting height 200 mm Electric height adjustment 2 x 45 kW motor Shaft diameter 65 mm Feed modernized to infinitely variable speed via potentiometer from approx. 0 to 40 m/min. incl. 3 saw bushes with saw blades and partly new saw blades Transport chain with spikes Good condition, ready for immediate use, demonstration possible.

1000KW Cooling Power Sale without guarantee, as is, where is. For more information please sent inquiry

Technical data for the pallet racking system: Shelving system: Arestant Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 16,760 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 36 pcs. Total pallet spaces: 36 pcs. Note: The visual materials serve to illustrate the material. The quantities shown may differ from the scope of delivery! The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendz. galvanized Profile dimensions: 80 x 70 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 6,005 mm high 800 mm deep 36x Pallet rack trusses, used Material colour: orange Truss Type: M14051 Box profile ...

Agfa Avalon N4-30 PT-R4600E, Year 2018 only approx.16K plates done Apogee Workflow RIP Inline punch Stacker ST 95EX Azura C95 Clean out unit Etc. Available: at short term

Cup wheel Ø: 180 mm Cup wheel speed: 2900 rpm electr. Connection: 380 V, 2900 rpm, 0.9 kW Vibration table dimensions: 200 x 350 mm Tilting Swinging Table Swing table swivels by +/- 20° Dimensions: 750 x 350 x 1270 mm

SPECIFICATIONS: Installed power: 2.5 HP Machining on both sides at the same time RPM: 12,000 rpm

Height=1.35 m, Overall length= 0.74 m, Overall width= 0.97 m, Net weight= 250 kg,

Height=0.4 m, Overall length= 0.45 m, Overall width= 0.45 m, Net weight= 20 kg,

Height=0.46 m, Overall length= 0.63 m, Overall width= 0.59 m, Net weight= 48 kg,