r s used for sale

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Key data: 6000 mm, 2000 mm

Ram travel (W) 1,200 mm Taper ISO 50 P.D.B. RPM 10 - 4,000 kW 22 Volts 400 A.T.C. 40 positions

Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg

Bread maker for baguette bread Manufacturer: Seewer Rondo

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 315 mm bore diameter: 91 mm turning speeds: 4000 U/min weight of the machine ca.: 72 kg Like new 2 Jaw power chucks, - Quick change system - 1 set ground jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including YUSHIN 5 axis servo robot - 21.5 HD Touch screen display - 23 languages - selectable - 10 stages of injection pressure & speed control - 6 stages of closing & 5 stages of opening via speed & position control - auto acceleration control - 10 stages of ejector control, 2 stage ejector and 4 patterns of ejector motion control - Simultaneous Ejector forward with clamp opening - Simultaneous clamp open and plasticising - Screw diameter: 20 mm - Injection volume: 24 cm? - Platen size h: 500 mm - Platen size v: 470 mm - Distance between tie-bars (h x v): 360 x 320 mm - Ejector force: 5 / 20 (2.0tonf) / 70 kN - Power: installed max: 15.7 kW - Operating hours: 10.600 - Weight: 2.900 kg

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKP 35826-02 (03) Baujahr / Year 1995 - SN. 1663459 Frequency 50 Hz Speed 2900 min power required 3 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kalenderstanze - Calender Punch Machine Renz Super 520 Year 1967 - Serial-No. 3659 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Elektrostapler - electric Forklift STILL R20-18I Serial-No. R20-18I - Year 2005 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (11) Baujahr / Year 1998 - SN. 1901355 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (11) Baujahr / Year 1997 - SN. 1822845 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (40) Baujahr / Year 2006 - SN. 2595119 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulic motor Manufacturer : Rotary Power Article: SMA 1430 C1 182 Condition : New

Radial Drilling Machine SCHLUMBERGER RF6 Spindle: SA40- with tools clamp Spindle exit: 300 mm Spindle speed: from 35 to 1800 RPM Table size: 1000 x 700 mm Year of construction: 1979 Column slide travel: 700 mm Maxi distance spindle nose/table: 850 mm (en high position) Mini distance spindle nose/table: 250 mm (en low position) Drilling / tapping function Auto descent Rotation at 360° on column Voltage: 380 V Width: 1300 mm Depth: 2000 mm Total high in low position: 2650 mm Total high in high position: 3000 mm Weight: env. 3 T

Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg

Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg

pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_oxide ...

Belt washing system Rösler C20.30/0.6/B/SOP/P/SOP,, Year of manufacture: 2016, Serial No.: 72441,, Stainless steel, for container dimensions 400 x 600 mm, consists of the following work zones:, washing 1, blow off 1, washing 2, blow-off 2, Cooling with ambient air, The workpieces pass through the washing zones of the system continuously on a chain conveyor system., The drive is via a gear motor with speed control., The surface of the workpieces is first sprayed and cleaned on all sides using nozzles., The workpiece carriers then pass through the blow-off zone, where the workpieces are blown off with filtered ambient air via special nozzles., Analogously, the workpieces pass through another washing and blow-off zone (washing 2 + blow-off 2), To ensure the cleanliness of the workpieces and the washing liquid, each washing zone is equipped with a filter system., To improve washing and dryi ...

Rego Herlitzius Shop Sickle knife machine Stainless steel version mobile Manual operation via rotary control Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread chute: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Consumption machine We carry a wide range of bread slicers!

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to custome ...

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - /

Machine Description - Machine Type: 6-Axis Robot - Manufacturer: Martin Systems - Model: RoboCube Maxi - Type: MRC 242499-10 - Fanuc M-20iA - Year of Manufacture: 2019 - Payload: 20 kg - Maximum Reach: 1811 mm - Repeatability: 0.08 mm - Weight: Approx. 250 kg - Dimensions: L 2900 x W 1600 x H 2100 mm --------------------------------------------------------------- Condition of Use - Condition: - Like new, well-maintained, fully functional Find more here - / Contact us at -

Standing stainless steel tanks, V4A Volume: 12,500 L Dimensions: Ø 2.35 × 3.10 high incl. feet Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm workpiece weight: 200 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 625 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg range L-W-H: 1 x 1,7 x 1,29 mm Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is i ...

KSS8.5.46, Axes 6, 90 hours, load capacity 10 kg, reach 901 mm, repeatability 0.03 mm Weight 52 kg,Controller 33 kg, smartPAD4, KSS 8.5,incorporated 2x Pneumatik air 1x cleanair, 100 Mbit Busconector, 2x extern axis conector Resolver Input, Datacable,Motorcable

Mobile battery-powered lifting device with travel drive, incl.: battery charger. Max. lifting height: 1500mm, max lifting capacity: 1500kg.

Bread line Seewer Rondo sheeter SKO63 STC composed of: - Seewer Rondo dough weigher - Seewer Rondo combi sheeter SKO63 STC - Sheeting machine with strip rounder and long cutter - with flour container - Dough weigher and sheeter are mobile on rollers

Technical Specification, Will be added soon, magnetic drum separators, Mizars semi-magnetic drum separators offer ideal solutions for separating ferrous metals from bulk materials and transported products. The MDS series is easy to operate and maintain and offers energy efficiency with low running costs.

bore capacity in steel (diameter): 50 mm throat: 365 mm bore stroke: 230 mm spindle diameter: 60 mm spindle taper: MK 4 spindle turning speed range: 54 - 1032 U/min no. of turning speeds: 9 Stufen feeds: mm/U table surface area: 620 x 520 mm total power requirement: 3,5 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,2 x 0,8 x 2,45 m Pillar drill with - Left/right rotation - Machine light - Coolant - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Qbo120-3-316-SGPV Serial number: 2304023123006 Year of construction: 2012 Bowl: 120 litres Speed: 0 - 2000 RPM Infeed height: 1450 mm Heating: steam, 160 kg/h Compressed air: 6-8 Bar, 20 l/min Power: 3 x 400V, 50Hz, 22kW Dimensions: 1800 x 1750 x 1800 mm Weight: 900 kg With automatic mixing, vacuum, double jacket and steam injection Automatic lid and tilting

Load capacity: 1000 kg max. opening: 1300 mm min. opening: 500 mm

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: SEW EURODRIVE, Type: A2E170-AA11-65/R60DT7ID4BM, Volt: 220/266, Ampere 1: 0.22-0,35, Motor torque Nm: 5, pm: 2700/300, Watt: 46-78, Weight approx. kg: 28,

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H<CRLF>9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

Manufacturer: Reichenbacher, Type: Vision 2 Sprint, Year: 1999, Control: Simumerik 840 D, Working range X: 6140, Working range Y-axis: 1600, Working range Z: 480, Feeding speed max m/min: 60, Pendulum processing: yes, Number of milling spindles: 4, Milling engine 1 hours power: 4,8, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 160, Year :1999

Manufacturer: SEW Getriebemotor, Type: R27 DT80K4/TH, mH/Hz: 50-60, Output PpK= kW: 0,55, Used: yes, Weight kg approx.: 11,9, Location 32469 Petershagen: yes, Available: 6, Price per unit Euro: 200, Price plus shipping: yes, FREE TEXT: V 220-240/380-415, Free text 1: Umin/1360/145/1660/176,

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,

Manufacturer: SCM, Type: Routomat 3 , Year: 1994, Control: scm, Work piece width min-max mm: 2500 X 1400, Working range X: 2500, Working range Y-axis: 1400, Working range Z: ca.350, C axis: yes, Work piece width min-max mm: 2500 X 1400, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, pm: 1500-18000, pm: 1500-18000, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 6, Alu-Glättisch: Alu Nuttisch, Tool clamping system: vakuum, FREE TEXT: C-Achse muss überholt werden Preis ca.3000 Euro, Year :1994

Power: 9 kW Volume: 6.43 m3 Pressure: 0.6 bar Price for a complete blower

Manufacturer: Monforts Model: RNC 500 Single Year of Manufacture: 2008 Type of Machine: CNC Lathe SingleTurn (without driven tools) Tailstock: No Chuck: SMW / KNCS-N-315-91 Control: 840D sl Bar capacity: max. 500 mm Tool holder: Disc turret VDI 40 (12 positions) Spindle run time: approx. 18,000 hours Find more here - / Contact us at -

Number of color 12 Width 1850 mm

tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 150 - 500 mm total power requirement: 3 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 2,4 0,6 1,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.