r s used for sale

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1464418 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1464435 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVX SN. MA24F165L2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: L A6VM 250 HD3 / 63W -VZB - B - SO154 Condition : New

Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: AL A6VM 355 HD2D / 63W 2-VZH157D B-S0167 Condition : New

Vakuumpumpe / Vaccum Pump Rietschle VFT 140 (11) Baujahr / Year 1995 - Serial-No. 102085-1113 Enddruck / Pressure 100mbar Saugvermögen / Vaccum capacity 50HZ=140/60HZ=168 m3/h Capacity 1450 / 170 min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75 Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 360 mm

Reishauer Model RZ362A CNC Gear Grinder Maximum Wheel Diameter: 14.17” Maximum Module: 0.275” Minimum Module: 0.0039” Slide Stroke: 6.88” Maximum Helix Angle: ± 45° Maximum Number of Teeth: 600 Minimum Number of Teeth: 6 Maximum Workpiece Weight: 132 lbs. Grinding Wheel Width: 4.09” Grinding Wheel Diameter: 11.02” – 13.77” Speed of Grinding Worm when Grinding: 1100 – 2330 U/min Speed of Grinding Worm when Profiling: 50 – 95 U/min Feed per Revolution of Workpiece: 0 – 0.133” Grinding Worm Infeed Speed: Up to 99.9mm/min / 3.93 IPM Approximate Weight: 14,553 lbs. EQUIPPED WITH: Reishauer CNC Controls. Dittel MBA2000 Balancing Controller. Elbaron R12D Mist Collector. Kato Motor Generator. Freestanding Hydraulic Unit. Hydraulic Oil Pump-Sump System. Free Standing Electrical Control Cabinet. Tailstock. (2) Wheel Hubs. Manuals and Drawin ...

Inv. Num. : 8005 Type: RUM 2500 P Producer: PIERCE Created: 2015 Parameters: Control system: Pierce 4/2015 Software: PIERCE WYKRYS CZ Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 60 mm Equipment: Technical documentation Plasma source Kjellberg HiFocus 360i Suction KEMPER

S. No.: V9042700001 Power: Colour / Mono: 65ppm, A4 Counter: Color total: 1,262,651 // BW total: 753,781 Format (cm): max. 45 x 32 SRA3 Gramatur (gr / m2) : up to 300 Resolution: 1200 x 4800 dpi Colour : 4 colours Equipment / Additional information: The machine can make brochures, staple and fold.

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

sheet width: 2500 mm plate thickness: 4 mm cutting angle: 1,49 ° : 40-80 column arm: 200 mm Number of hold downs: 13 Stück back stop - adjustable: 5-1000 mm table height: 750 mm oil volume: 85 l air pressure - required: 5 bar weight of the machine ca.: 3600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Key data: 1000 mm, 25

Hofler Rapid 900 CNC form wheel gear grinder Year: 2003 installed 2004 This universal CNC form wheel gear grinder is a great job shop machine it can be inspected in plant under power . Machine is equipped complete with all necessary items to run this machine in your facility Machine specifications Max tip diameter of workpiece 1000 mm Max root diameter 50 mm stroke length 650 mm max workpiece height under tailstock 1960 mm profile height 41 mm Module 1-25 mm Helix angle +/- 45 deg Max grinding wheel diameter 400 mm Min wheel diameter 200 mm grinding wheel width 60 mm grinding spindle motor 13.5 Kw Grinding spindle speed range 1- 4000 RPM Dressing roll diameter 160 mm dressing roll spindle speed range 1-540 ...

: 28 t : 2000 mm : 1000 mm machine weight ab.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 25 mm

Special price 2.630,- instead of € 3.090,- excl. VAT - Exact setting of the drilling depth - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Quill stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle holder: MK3 - Spindle speed: 129 - 1498 rpm - Gear stages: 4 - Max. distance spindle/table: 730 mm - Projection: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1720 x 500 mm - Weight: 185 kg

EREMA flush filter with partial flush back. SW 4/134 RTF

Key data: 630 mm, 300 mm, 9 kW

EXHIBITION MACHINE Weight 950 kg Voltage 3 x 400 V Engine power (S6) 9.2 kW / 12 hp Dust extraction connection 160 mm Diameter knife block 120 mm Number of knives 4 Dimensions knife 630 x 30 x 3 mm Max. cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 – 300 mm Dimensions thickness planing table 1160 x 630 mm 8D9Qxjdewy Variable feed speed 5 – 22 m/min. Diameter of feed rollers 70 mm incl. TERSA. Knife shaft Image includes optional accessories

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Riggs 1000 Three head filler Serial: TT1737 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings

Inv. Num. : 8094 Type:- Producer: Doosan Created: 2023 Parameters: Maximum load capacity: 25 kg Inclination: 2700 mm Working Range: 360

Wire diameter between 3-8 mm

weight: 145 kg engine output: 1,27/1,7 kW : 83 dB speed: 15/30 m/s : 150x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ruhle MKR130 Tumbler 2015, Stainless, 130l tumbler, 3Kw, mobile, 3Ph

Proportional valves Magnetically operated RPE4-103 H11/02400E1

Key data: 84 V

Complete Containerised 2G Agenitor RO4 Biogas Genset Year: 2017 Capacity: 84kW Hours: 318 HZ: 50 V: 400 Scope of supply : Complete Containerised Unit including: Engine, Alternator, Base Frame, Control Panel, Circuit Breaker, Radiator. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg

S. No.: 1139 // Print counter (m): 66,6 // Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg

Reform Bautz Compact MF60 machining center :::TECHNICAL SPECIFICATIONS::: CNC Model: Selca - CNC Version: 4045PD - Tool Holder: HSK 63 - Spindle Speed: 18000 Number of tools: 99 - X-axis travel: 1380mm - Y-axis travel: 600mm - Z-axis travel: 500mm - Swivel rotary table: yes Swivel rotary table type: continuous Table size: 710 x 710mm Allowable load on the board: 700Kg High refrigerant pressure: yes Chip conveyor: belt Presetting: yes Other technical data: Machine with granite base Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Weight: 12000Kg

This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.

Fettbaker Kippfix Roka Werk TW 36-E -with 10 tilting planks Pool dimensions: 50x88cm and 8.5cm high Dimensions: 218cm length 92cm height

Printing machine Ryobi 512 H - Year of Make:2001 - 2 colors - Direct film dampening unit - Super damper - Shed Feeder - Landscape format: 36.5 x 52 cm - with plate punch - axe - Bacher plate system - With quick-plate tension rails - With Royse ECO-15 cooling unit - With voting table and lighting - Total revolutions: 23661330 - Printing number approx. 16 million printing - Very well-maintained machine - Fully functional

Semi-automatic bun-rounding press chops and rounds; divides dough into 30 pieces; power 380 V / 50 Hz/ 3; set includes 3 press plates

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Vertical machining center FANUC Robodrill Alpha T14iA ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Vertical machining center FANUC Robodrill Alpha T21iC 2002 ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same workpiece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector, SOLD - more available in stock, VENDUTA - altre disponibili in stock, Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 18, Number of rollers: 2, PLC: Siemens

x-travel: 1250 mm y-travel: 600 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3300 mm y-travel: 2200 mm z-travel: 1300 mm w-axis: 350 mm workpiece height: 1700 mm milling spindle diameter: 140 mm diameter of quill: 230 mm milling head speed: 40-2000 U/min transmission ratio: 4 table surface area: 4260x2000 mm T-slot - distance: 175 mm T-slot - width: 28 mm number of T-slots: 11 workpiece weight: 300000 kg milling spindle motor: 30 kW Feed: 5-3000 mm/min control: Fidia total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 3500 mm floor-plate width: 1600 mm floor-plate height: 180 mm T-slot - distance: 175 mm T-slot - width: 30/50 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 700 mm z-travel: 750 mm Control: Heidenhain type: TNC 151 table surface area: 1200x630 mm spindle taper ISO: 50 turning speeds: 20-2900 U/min milling-head swivable +/-: total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1300x650 mm Working height: 350 mm 0: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . l 0: 5-400 °C total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mm y-travel: 3300 mm z-travel: 1300 mm Table load: 50000 kg column daylight: 2600 mm workpiece height max.: 1700 mm Table dimensions: 5000x2000 mm control: Heidenhain type: ITNC530 : angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: 1300 mm Control: Heindenhain type: TNC530i : table surface area: 5200x2000 mm Table load: 30000 kg pinole diameter: 230 mm number of T-slots: 11 T-slot - width: 28 mm T-slot - distance: 175 mm spindle taper ISO: 50 turning speeds: 40-2000 U/min spindle motor: 30 kW transmission ratio: 4 total power requirement: kW weight of the machine ca.: 70 t dimensions of the machine ca.: 10x5,5x5,8 m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.